John Mccorquodale (27 results)

Hardcover. Condition: Very Good. 1st Edition. Very Good Plus condition with faint edge and corner wear. Science institute stamp on the top of the page edges and front free. Partial card pocket and some small tape inside front cover. Interior is unmarked with clean white pages.

Magazine. Condition: Very Good. First Edition. A very good copy of the 1992 issue of Debrett's International. Previous owner's name in ink on front endsheet, else the text is wholly unmarked, pristine, and the binding is bright and fresh in appearance. Includes (pp120-125) the article "Fangio: Master Racer, with byline by Juan Manuel Fangio ("with additional material from John Wesley"). A lovely copy.

Hardcover. Condition: Fine. 1st Edition.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: New.

Condition: New.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: New.

Condition: New. In.

Condition: new.

Condition: NEW.

Paperback. Condition: new. Paperback. Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards. This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs. Nine Chapters cover a wide range of subjects including: Flocculation and settling behaviour of biological sludges SST performance evaluation protocols Development and evaluation of the different design procedures such as the flux theory and the ATV design rules Developments in and application of one- two- and three-dimensional modelling Experience-based aspects of design and operation of circular, rectangular and vertical SSTs This report collates many of the significant developments that have taken place in secondary settling tank theory, design, modelling and operation. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condition: New. pp. 236 64:B&W 8.268 x 11.693 in or 297 x 210 mm (A4) Perfect Bound on White w/Gloss Lam.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: New. Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards.  This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs.  Nine chapters cover a wide range of subjects including:  Flocculation and settling behaviour of biological sludges             SST performance evaluation protocols           Development and evaluation of the different design procedures such as the flux theory and the ATV design rules            Developments in and application of one- two- and three-dimensional modelling             Experience-based aspects of design and operation of circular, rectangular and vertical SSTs.  Reprinted for 2006   Scientific and Technical Report No.6.

Condition: New. 1997. paperback. . . . . .

Condition: New.

Paperback. Condition: New. Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards.  This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs.  Nine chapters cover a wide range of subjects including:  Flocculation and settling behaviour of biological sludges             SST performance evaluation protocols           Development and evaluation of the different design procedures such as the flux theory and the ATV design rules            Developments in and application of one- two- and three-dimensional modelling             Experience-based aspects of design and operation of circular, rectangular and vertical SSTs.  Reprinted for 2006   Scientific and Technical Report No.6.

Paperback. Condition: Brand New. 232 pages. 11.50x8.00x0.50 inches. In Stock.

Condition: New.

Kartoniert / Broschiert. Condition: New. KlappentextrnrnAlthough developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards.

Paperback. Condition: new. Paperback. Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards. This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs. Nine Chapters cover a wide range of subjects including: Flocculation and settling behaviour of biological sludges SST performance evaluation protocols Development and evaluation of the different design procedures such as the flux theory and the ATV design rules Developments in and application of one- two- and three-dimensional modelling Experience-based aspects of design and operation of circular, rectangular and vertical SSTs This report collates many of the significant developments that have taken place in secondary settling tank theory, design, modelling and operation. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Condition: New. 1997. paperback. . . . . . Books ship from the US and Ireland.

Paperback. Condition: New. Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards.  This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs.  Nine chapters cover a wide range of subjects including:  Flocculation and settling behaviour of biological sludges             SST performance evaluation protocols           Development and evaluation of the different design procedures such as the flux theory and the ATV design rules            Developments in and application of one- two- and three-dimensional modelling             Experience-based aspects of design and operation of circular, rectangular and vertical SSTs.  Reprinted for 2006   Scientific and Technical Report No.6.

Taschenbuch. Condition: Neu. Neuware - Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards. This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs. Nine chapters cover a wide range of subjects including: Flocculation and settling behaviour of biological sludges SST performance evaluation protocols Development and evaluation of the different design procedures such as the flux theory and the ATV design rules Developments in and application of one- two- and three-dimensional modelling Experience-based aspects of design and operation of circular, rectangular and vertical SSTs.

Taschenbuch. Condition: Neu. Secondary Settling Tanks | Theory, Modelling, Design and Operation | Ekama (u. a.) | Taschenbuch | Scientific & Technical Report | Kartoniert / Broschiert | Englisch | 1997 | IWA PUB | EAN 9781900222037 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Paperback. Condition: New. Although developments in wastewater treatment over recent decades have focused on the biological reactor, the secondary settling tank (SST) also plays a major role in achieving increasingly stringent effluent quality standards.  This report collates many of the significant developments that have taken place in SST theory, design, modelling and operation. Earlier SSTs were designed only by empirical hydraulic criteria such as overflow rate, which do not recognize sludge concentration and settleability. Today, there are available not only much improved design procedures but also hydrodynamic models for simulating water and solids distribution and flows in full-scale SSTs.  Nine chapters cover a wide range of subjects including:  Flocculation and settling behaviour of biological sludges             SST performance evaluation protocols           Development and evaluation of the different design procedures such as the flux theory and the ATV design rules            Developments in and application of one- two- and three-dimensional modelling             Experience-based aspects of design and operation of circular, rectangular and vertical SSTs.  Reprinted for 2006   Scientific and Technical Report No.6.