Tavner Peter Ran Li Crabtree Christopher (22 results)

Condition: New.

Hardback. Condition: New. Condition monitoring of engineering plants has increased in importance as engineering processes have become increasingly automated. However, electrical machinery usually receives attention only at infrequent intervals when the plant or the electricity generator is shut down. The economics of industry have been changing, placing ever more emphasis on the importance of reliable operation of the plants. Electronics and software in instrumentation, computers, and digital signal processors have improved our ability to analyse machinery online. Condition monitoring is now being applied to a range of systems from fault-tolerant drives of a few hundred watts to machinery of a few hundred MW in major plants. This book covers a large range of machines and their condition monitoring. This 3rd edition builds on the 2nd edition through a major revision, update of chapters and a comprehensive list of references and standards. Permanent magnet, switched reluctance and other types of machines are now covered, as well as variable speed drive machines and off-line techniques. Contents cover an introduction to condition monitoring; rotating electrical machines; electrical machine construction, operation and failure modes; reliability of machines and typical failure rates; signal processing and instrumentation requirements; on-line temperature monitoring; on-line chemical monitoring; on-line vibration monitoring; on-line current, flux and power monitoring; on-line partial discharge (PD) electrical monitoring; on-line variable speed drive machine monitoring; off-line monitoring; condition-based maintenance and asset management; application of artificial intelligence techniques to CM; and safety, training and qualification.…

Condition: New.

Condition: As New. Unread book in perfect condition.

Condition: New.

Condition: New.

Condition: As New. Unread book in perfect condition.

HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: New. In English.

Hardback. Condition: New. Condition monitoring of engineering plants has increased in importance as engineering processes have become increasingly automated. However, electrical machinery usually receives attention only at infrequent intervals when the plant or the electricity generator is shut down. The economics of industry have been changing, placing ever more emphasis on the importance of reliable operation of the plants. Electronics and software in instrumentation, computers, and digital signal processors have improved our ability to analyse machinery online. Condition monitoring is now being applied to a range of systems from fault-tolerant drives of a few hundred watts to machinery of a few hundred MW in major plants. This book covers a large range of machines and their condition monitoring. This 3rd edition builds on the 2nd edition through a major revision, update of chapters and a comprehensive list of references and standards. Permanent magnet, switched reluctance and other types of machines are now covered, as well as variable speed drive machines and off-line techniques. Contents cover an introduction to condition monitoring; rotating electrical machines; electrical machine construction, operation and failure modes; reliability of machines and typical failure rates; signal processing and instrumentation requirements; on-line temperature monitoring; on-line chemical monitoring; on-line vibration monitoring; on-line current, flux and power monitoring; on-line partial discharge (PD) electrical monitoring; on-line variable speed drive machine monitoring; off-line monitoring; condition-based maintenance and asset management; application of artificial intelligence techniques to CM; and safety, training and qualification.…

Hardcover. Condition: Brand New. 3rd edition. 400 pages. 9.25x6.25x1.00 inches. In Stock.

Hardback. Condition: New. Condition monitoring of engineering plants has increased in importance as engineering processes have become increasingly automated. However, electrical machinery usually receives attention only at infrequent intervals when the plant or the electricity generator is shut down. The economics of industry have been changing, placing ever more emphasis on the importance of reliable operation of the plants. Electronics and software in instrumentation, computers, and digital signal processors have improved our ability to analyse machinery online. Condition monitoring is now being applied to a range of systems from fault-tolerant drives of a few hundred watts to machinery of a few hundred MW in major plants. This book covers a large range of machines and their condition monitoring. This 3rd edition builds on the 2nd edition through a major revision, update of chapters and a comprehensive list of references and standards. Permanent magnet, switched reluctance and other types of machines are now covered, as well as variable speed drive machines and off-line techniques. Contents cover an introduction to condition monitoring; rotating electrical machines; electrical machine construction, operation and failure modes; reliability of machines and typical failure rates; signal processing and instrumentation requirements; on-line temperature monitoring; on-line chemical monitoring; on-line vibration monitoring; on-line current, flux and power monitoring; on-line partial discharge (PD) electrical monitoring; on-line variable speed drive machine monitoring; off-line monitoring; condition-based maintenance and asset management; application of artificial intelligence techniques to CM; and safety, training and qualification.…

Hardcover. Condition: Brand New. 450 pages. 6.14x2.00x9.21 inches. In Stock.

Hardback. Condition: New. Rotating electrical machines are embedded in nearly every sector of modern industry; they are widely used in industrial settings, as motors in transportation applications - including electric vehicles - and in power generation, where they are a key component of wind turbines. Technical advances are transforming what these machines can achieve. New developments in rotating electrical machinery have arisen from novel or improved materials, including new insulation materials, as well as advances in electrical steels and high-performance permanent magnets, and more rapid mass production techniques. These improvements deliver benefits such as cheaper and faster manufacturing and enhanced performance from the final products. At the same time, condition monitoring and maintenance techniques are also changing rapidly through increased application and further research and development, and are becoming essential to ensuring reliability, availability and cost-effectiveness for electrical machine systems, from small industrial drives to multi-megawatt generators. Condition Monitoring of Rotating Electrical Machines has established itself as a definitive reference for researchers and engineers in the energy, transport, process engineering and manufacturing industries and in related academic research. Coverage includes fundamental principles of condition monitoring, plus in-depth discussion of reliability, signal processing, online temperature, chemical and vibration monitoring, current, flux and power monitoring, partial discharge detection, drive monitoring, off-line monitoring, condition-based maintenance, use of AI and machine learning, and safety and training. This 4th Edition has been expanded, revised and updated throughout, and features new chapters, addressing novel machine designs, new materials, clean energy and transport, the use of AI, and strategies for reliability, availability and maintenance.…

Condition: New. &Uumlber den AutorrnrnPeter Tavner is an Emeritus Professor at Durham University, UK. He has held a number of senior research and technical positions in the electrical supply and manufacturing industries, including two of the UK s large elec.

Hardback. Condition: New. Condition monitoring of engineering plants has increased in importance as engineering processes have become increasingly automated. However, electrical machinery usually receives attention only at infrequent intervals when the plant or the electricity generator is shut down. The economics of industry have been changing, placing ever more emphasis on the importance of reliable operation of the plants. Electronics and software in instrumentation, computers, and digital signal processors have improved our ability to analyse machinery online. Condition monitoring is now being applied to a range of systems from fault-tolerant drives of a few hundred watts to machinery of a few hundred MW in major plants. This book covers a large range of machines and their condition monitoring. This 3rd edition builds on the 2nd edition through a major revision, update of chapters and a comprehensive list of references and standards. Permanent magnet, switched reluctance and other types of machines are now covered, as well as variable speed drive machines and off-line techniques. Contents cover an introduction to condition monitoring; rotating electrical machines; electrical machine construction, operation and failure modes; reliability of machines and typical failure rates; signal processing and instrumentation requirements; on-line temperature monitoring; on-line chemical monitoring; on-line vibration monitoring; on-line current, flux and power monitoring; on-line partial discharge (PD) electrical monitoring; on-line variable speed drive machine monitoring; off-line monitoring; condition-based maintenance and asset management; application of artificial intelligence techniques to CM; and safety, training and qualification.…

Hardback. Condition: New. Rotating electrical machines are embedded in nearly every sector of modern industry; they are widely used in industrial settings, as motors in transportation applications - including electric vehicles - and in power generation, where they are a key component of wind turbines. Technical advances are transforming what these machines can achieve. New developments in rotating electrical machinery have arisen from novel or improved materials, including new insulation materials, as well as advances in electrical steels and high-performance permanent magnets, and more rapid mass production techniques. These improvements deliver benefits such as cheaper and faster manufacturing and enhanced performance from the final products. At the same time, condition monitoring and maintenance techniques are also changing rapidly through increased application and further research and development, and are becoming essential to ensuring reliability, availability and cost-effectiveness for electrical machine systems, from small industrial drives to multi-megawatt generators. Condition Monitoring of Rotating Electrical Machines has established itself as a definitive reference for researchers and engineers in the energy, transport, process engineering and manufacturing industries and in related academic research. Coverage includes fundamental principles of condition monitoring, plus in-depth discussion of reliability, signal processing, online temperature, chemical and vibration monitoring, current, flux and power monitoring, partial discharge detection, drive monitoring, off-line monitoring, condition-based maintenance, use of AI and machine learning, and safety and training. This 4th Edition has been expanded, revised and updated throughout, and features new chapters, addressing novel machine designs, new materials, clean energy and transport, the use of AI, and strategies for reliability, availability and maintenance.…

hardcover. Condition: New. New .Ships From Multiple Locations. book.

HRD. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

HRD. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.