Puncochar Daniel (23 results)

Paperback. Condition: Good. ARRIVES IN 2-4 BUSINESS DAYS if you choose Expedited Shipping! May contain highlighting/underlining/notes/etc. May have used stickers on cover. Access codes and supplements are not guaranteed to be included with used books. Ships same or next day. Expedited shipping: 3-5 business days, Standard shipping: 4-14 business days.

Large Paperback. Condition: Good. First Printing. Some writing and highlighting. Completely updated for ASME Y14.5-2009! Geometric Dimensioning and Tolerancing (GD&T) has become accepted around the world as the international symbolic language that allows engineers and machinists to use engineering drawings to communicate from the design stage through manufacturing and inspection. Deductively organized, this book is a complete on-the-job reference that provides a thorough understanding to the complex ASME Y14.5-2009 "Dimensioning and the Tolerancing" standard.

Condition: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Hardcover. Condition: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Paperback. Condition: Used; Very Good. **SHIPPED FROM UK** We believe you will be completely satisfied with our quick and reliable service. All orders are dispatched as swiftly as possible! Buy with confidence! Greener Books.

Condition: New.

Condition: New.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: New.

Condition: New. In.

Paperback. Condition: new. New Copy. Customer Service Guaranteed.

Condition: New. Satisfaction Guaranteed or your money back.

Condition: New. Satisfaction Guaranteed or your money back.

Hardback. Condition: New. Completely updated for ASME Y14.5-2009! Geometric Dimensioning and Tolerancing (GDandT) has become accepted around the world as the international symbolic language that allows engineers and machinists to use engineering drawings to communicate from the design stage through manufacturing and inspection. Deductively organized, this book is a complete on-the-job reference that provides a thorough understanding to the complex ASME Y14.5-2009 "Dimensioning and the Tolerancing" standard.  Uses a "building-block" approach with examples (some dimensioned and toleranced in inches and some in millimeters) to illustrate each concept.Reinforces the explanations with end-of-chapter self evaluation exercises (the answers to all questions and problems are contained in the back of the book).Includes over one hundred drawings that illustrate concepts under discussion.Provides the information needed to become conversant in the techniques of GDandT and how to smoothly integrate this knowledge into engineering design and modern inspection systems.Dan Puncochar was most recently manager of Corporate Quality Assurance for the world's largest truck manufacturer. His career spanned 30 years. Previously, he held positions in the Engineering Test Lab and in the Corporate Training Department, where he instructed production workers in basic and advanced courses in machine technology. He also taught quality assurance inspectors blueprint reading and GDandT - among other courses -- and subsequently was called on to teach GDandT throughout the Corporation. Ken Evans is a machine tool Sales Engineer for a leading distributor of metal cutting and quality control equipment and services. Previously, he was a Machine Tool Technology instructor at Davis Applied Technology College (Utah), where he taught for nearly 20 years. Ken started in the machining trade at Cessna Aircraft in 1976. He has since held a wide variety of machining and related jobs throughout his career: Machine Tool Technology Instructor, Prototype CNC Machinist, Quality Control Inspector, Mold Maker, Tool and Die Maker. He is the author ofProgramming of CNC Machines, 3rd Edition, and the accompanying Student Workbook, both available from Industrial Press. Introduction Symbols and Abbreviations DatumsFeature Control Frames General RulesForm and Orientation Tolerances Virtual Condition Tolerances of Location Practical Application Appendices: Past, Plus/Minus Positional Tolerancing, Symbols Glossary "Dimensioning and the Tolerancing" Standard.

Paperback. Condition: Brand New. 3rd edition. 336 pages. 10.75x8.50x0.50 inches. In Stock.

Condition: New. InhaltsverzeichnisTable of Contents: Introduction. Symbols and Abbreviations. Datums. Feature Control Frames. General Rules. Form and Orientation Tolerances. Virtual Condition. Tolerances of Location. Practical Application Appendices: Pa.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: As New. Unread book in perfect condition.

Hardback. Condition: New. Completely updated for ASME Y14.5-2009! Geometric Dimensioning and Tolerancing (GDandT) has become accepted around the world as the international symbolic language that allows engineers and machinists to use engineering drawings to communicate from the design stage through manufacturing and inspection. Deductively organized, this book is a complete on-the-job reference that provides a thorough understanding to the complex ASME Y14.5-2009 "Dimensioning and the Tolerancing" standard.  Uses a "building-block" approach with examples (some dimensioned and toleranced in inches and some in millimeters) to illustrate each concept.Reinforces the explanations with end-of-chapter self evaluation exercises (the answers to all questions and problems are contained in the back of the book).Includes over one hundred drawings that illustrate concepts under discussion.Provides the information needed to become conversant in the techniques of GDandT and how to smoothly integrate this knowledge into engineering design and modern inspection systems.Dan Puncochar was most recently manager of Corporate Quality Assurance for the world's largest truck manufacturer. His career spanned 30 years. Previously, he held positions in the Engineering Test Lab and in the Corporate Training Department, where he instructed production workers in basic and advanced courses in machine technology. He also taught quality assurance inspectors blueprint reading and GDandT - among other courses -- and subsequently was called on to teach GDandT throughout the Corporation. Ken Evans is a machine tool Sales Engineer for a leading distributor of metal cutting and quality control equipment and services. Previously, he was a Machine Tool Technology instructor at Davis Applied Technology College (Utah), where he taught for nearly 20 years. Ken started in the machining trade at Cessna Aircraft in 1976. He has since held a wide variety of machining and related jobs throughout his career: Machine Tool Technology Instructor, Prototype CNC Machinist, Quality Control Inspector, Mold Maker, Tool and Die Maker. He is the author ofProgramming of CNC Machines, 3rd Edition, and the accompanying Student Workbook, both available from Industrial Press. Introduction Symbols and Abbreviations DatumsFeature Control Frames General RulesForm and Orientation Tolerances Virtual Condition Tolerances of Location Practical Application Appendices: Past, Plus/Minus Positional Tolerancing, Symbols Glossary "Dimensioning and the Tolerancing" Standard.

Taschenbuch. Condition: Neu. Neuware - Completely updated for ASME Y14.5-2009! Geometric Dimensioning and Tolerancing (GD&T) has become accepted around the world as the international symbolic language that allows engineers and machinists to use engineering drawings to communicate from the design stage through manufacturing and inspection. Deductively organized, this book is a complete on-the-job reference that provides a thorough understanding to the complex ASME Y14.5-2009 'Dimensioning and the Tolerancing' standard.Features- Uses a 'building-block' approach with examples (some dimensioned and toleranced in inches and some in millimeters) to illustrate each concept.- Reinforces the explanations with end-of-chapter self evaluation exercises (the answers to all questions and problems are contained in the back of the book).- Includes over one hundred drawings that illustrate concepts under discussion.- Provides the information needed to become conversant in the techniques of GD&T and how to smoothly integrate this knowledge into engineering design and modern inspection systems.

Paperback / softback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.