Injection Mold Coating Technology (21 results)
- Hardcover
Seller: PBShop.store UK, Fairford, GLOS, United KingdomPBShop.store UK
Contact seller5-star sellerCondition: New
£ 130.18
£ 5.87 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000.
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: New
£ 141.75
£ 2.00 shippingShips within U.S.A.Quantity: 1 available
Condition: New.
- Hardcover
Seller: INDOO, Avenel, NJ, U.S.A.INDOO
Contact seller5-star sellerCondition: New
£ 143.82
Free ShippingShips within U.S.A.Quantity: 20 available
Condition: New.
- Hardcover
Seller: Brook Bookstore On Demand, Napoli, NA, ItalyBrook Bookstore On Demand
Contact seller3-star sellerCondition: New
£ 137.72
£ 9.54 shippingShips from Italy to U.S.A.Quantity: 4 available
Condition: new.
- Hardcover
Seller: GreatBookPricesUK, Woodford Green, United KingdomGreatBookPricesUK
Contact seller5-star sellerCondition: New
£ 130.17
£ 15.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: New.
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: Used - As new
£ 154.00
£ 2.00 shippingShips within U.S.A.Quantity: 1 available
Condition: As New. Unread book in perfect condition.
- Hardcover
Seller: GreatBookPricesUK, Woodford Green, United KingdomGreatBookPricesUK
Contact seller5-star sellerCondition: Used - As new
£ 148.14
£ 15.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: As New. Unread book in perfect condition.
- Hardcover
- First Edition
Seller: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrelandKennys Bookshop and Art Galleries Ltd.
Contact seller5-star sellerCondition: New
£ 162.76
£ 9.11 shippingShips from Ireland to U.S.A.Quantity: 1 available
Condition: New. 2024. 1st Edition. hardcover. . . . . .
- Hardcover
Seller: Rarewaves.com USA, London, LONDO, United KingdomRarewaves.com USA
Contact seller5-star sellerCondition: New
£ 177.07
Free ShippingShips from United Kingdom to U.S.A.Quantity: 2 available
Hardback. Condition: New. This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This possibili…ty of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.
- Hardcover
Seller: moluna, Greven, , Germanymoluna
Contact seller5-star sellerCondition: New
£ 132.50
£ 42.48 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: New. This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastic.
- Hardcover
Seller: Revaluation Books, Exeter, , United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 162.59
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Hardcover. Condition: Brand New. 371 pages. 7.01x1.18x9.61 inches. In Stock.
- Hardcover
Seller: Rheinberg-Buch Andreas Meier eK, Bergisch Gladbach, , GermanyRheinberg-Buch Andreas Meier eK
Contact seller5-star sellerCondition: New
£ 160.77
£ 19.95 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. Contents:-Introduction-Tool Steels and Their Coatability-Fundamentals of Coating Technologies-Measurement Technology for Coating Characterization-Application of Functional Coatings 400 pp. Englisch.
- Hardcover
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 160.77
£ 19.95 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. Contents:-Introduction-Tool Steels and Their Coatability-Fundamentals of Coating Technologies-Measurement Technology for Coating Characterization-Application of Functional Coatings 400 pp. Englisch.
- Hardcover
Seller: Wegmann1855, Zwiesel, , GermanyWegmann1855
Contact seller5-star sellerCondition: New
£ 160.77
£ 22.50 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.
- Hardcover
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 193.76
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 3 available
Condition: New.
- Hardcover
Seller: Kennys Bookstore, Olney, MD, U.S.A.Kennys Bookstore
Contact seller5-star sellerCondition: New
£ 204.74
£ 7.93 shippingShips within U.S.A.Quantity: 1 available
Condition: New. 2024. 1st Edition. hardcover. . . . . . Books ship from the US and Ireland.
- Hardcover
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
£ 160.77
£ 52.03 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.Hanser Fachbuchverlag, Kolberger Str. 22, 81679 München 400 pp. Englisch.
- Hardcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 212.18
£ 3.02 shippingShips within U.S.A.Quantity: 3 available
Condition: New.
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 162.69
£ 56.42 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Neuware - This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This pos…sibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. Contents:-Introduction-Tool Steels and Their Coatability-Fundamentals of Coating Technologies-Measurement Technology for Coating Characterization-Application of Functional Coatings.
- Hardcover
Seller: Rarewaves.com UK, London, United KingdomRarewaves.com UK
Contact seller5-star sellerCondition: New
£ 162.09
£ 65.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Hardback. Condition: New. This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This possibili…ty of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.
- Hardcover
Seller: Books-by-Floh, Paderborn, GermanyBooks-by-Floh
Contact seller4-star sellerCondition: New
£ 202.62
£ 91.06 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This poss…ibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology. 400 pp. Englisch.
