Applications Statistics Industrial Experimentation by Daniel Cuthbert (24 results)

Hardcover. Condition: Fair. No Jacket. Former library book; Missing dust jacket; Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Condition: Very Good. No Jacket. Missing dust jacket; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Hardback. Condition: Fair. Mr. Daniel's book concerns itself with statistical aids available for the planning of industrial experiments and with the analysis and interpretation of the data collected from such experiments. In it, he questions some standard designs and procedures in analysis, contending that many can be checked only after the data are in. There are many detailed examples. Chapters 1-3: Design of multifactor industrial experiments has become routinized. In addition, analysis of resulting data is often handled by computer programs long-since outdated--programs still being taught on the university level and still part of most statistical texts. Chapter 4: Here the study of data from simple two-factor three-level designs is carried further than in other available works. Spotting and interpretation of irregular results are feasible even in such small data sets. Chapters 5-8: Size of industrial experiments is rarely determined by standard statistical criteria of power or by shortness of confidence intervals. The real criteria are usually time- and budget-restrictions, and nearness to final decision on marketability. Chapter 10: Blocking of factorial and fractional factorial plans is considered. Chapters 11-13: The rationale of fractionation of factorial designs is given in new detail. Chapter 14: Clearing up residual ambiguities after completion of a fractional design is often proposed by way of doubling the amount of work really needed. Daniel points out that much smaller augmentations are often feasible, and their selection is detailed for many cases. Chapter 15: When smooth time trends (linear and quadratic) are known to occur, more efficient and compact plans than the usual blocked designs are possible. Here they are offered. Chapter 16: Serious examples of nested designs require special care--especially in analysis. Here is a volume that should be valuable to experimenters who have some knowledge of elementary statistics (at least one year of undergraduate-level statistics), and to the statistician who seeks simple explanations, detailed examples, and documentation of the many outcomes that can be expected to occur. …

Hardback. Condition: Fair. Mr. Daniel's book concerns itself with statistical aids available for the planning of industrial experiments and with the analysis and interpretation of the data collected from such experiments. In it, he questions some standard designs and procedures in analysis, contending that many can be checked only after the data are in. There are many detailed examples. Chapters 1-3: Design of multifactor industrial experiments has become routinized. In addition, analysis of resulting data is often handled by computer programs long-since outdated--programs still being taught on the university level and still part of most statistical texts. Chapter 4: Here the study of data from simple two-factor three-level designs is carried further than in other available works. Spotting and interpretation of irregular results are feasible even in such small data sets. Chapters 5-8: Size of industrial experiments is rarely determined by standard statistical criteria of power or by shortness of confidence intervals. The real criteria are usually time- and budget-restrictions, and nearness to final decision on marketability. Chapter 10: Blocking of factorial and fractional factorial plans is considered. Chapters 11-13: The rationale of fractionation of factorial designs is given in new detail. Chapter 14: Clearing up residual ambiguities after completion of a fractional design is often proposed by way of doubling the amount of work really needed. Daniel points out that much smaller augmentations are often feasible, and their selection is detailed for many cases. Chapter 15: When smooth time trends (linear and quadratic) are known to occur, more efficient and compact plans than the usual blocked designs are possible. Here they are offered. Chapter 16: Serious examples of nested designs require special care--especially in analysis. Here is a volume that should be valuable to experimenters who have some knowledge of elementary statistics (at least one year of undergraduate-level statistics), and to the statistician who seeks simple explanations, detailed examples, and documentation of the many outcomes that can be expected to occur. …

Condition: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:0471194697.…

Hardcover. Condition: Good. No Dust Jacket. Exlibrary with usual library markings. Cover Wear.; 294 pages.

hardcover. Condition: Very Good. No Dust Jacket. First Edition. Very good condition, clear, bright and tight. Ex-library with usual stamps. Ex-Library.

hardcover. Condition: New. In shrink wrap. Looks like an interesting title.

HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: new.

Condition: New.

Condition: New.

Condition: As New. Unread book in perfect condition.

Condition: As New. Unread book in perfect condition.

Hardback. Condition: New. 1st. Other volumes in the Wiley Series in Probability and MathematicalStatistics, Ralph A. Bradley, J. Stuart Hunter, David G. Kendall,and Geoffrey S. Watson, Advisory Editors Statistical Models inApplied Science Karl V. Bury Of direct interest to engineers andapplied scientists, this book presents general principles ofstatistics and specific distribution methods and models. Prominentdistribution properties and methods that are useful over a widerange of applications are covered in detail. The strengths andweaknesses of the distributional models are fully described, givingthe reader a firm, intuitive approach to the selection of the modelmost appropriate to the problem at hand. 1975 656 pp. FittingEquations To Data Computer Analysis of Multifactor Data forScientists and Engineers Cuthbert Daniel and Fred S. Wood Withthe assistance of John W. Gorman The purpose of this book is tohelp the serious data analyst, scientist, or engineer with acomputer to: recognize the strengths and limitations of his data;test the assumptions implicit in the least squares methods used tofit the data; select appropriate forms of the variables; judgewhich combinations of variables are most influential; and state theconditions under which the fitted equations are applicable.Throughout, mathematics is kept at the level of college algebra.1971 342 pp. Methods for Statistical Analysis of Reliability AndLife Data Nancy R. Mann, Ray E. Schafer and Nozer D. SingpurwallaThis book introduces failure models commonly used in reliabilityanalysis, and presents the most useful methods for analyzing thelife data of these models. Highlights include: material onaccelerated life testing; a comprehensive treatment of estimationand hypothesis testing; a critical survey of methods forsystem-reliability confidence bonds; and methods for simulation oflife data and for testing fit. 1974 564 pp.…

Condition: New.

Condition: New. In English.

Condition: New. pp. 320.

Condition: New. pp. 320 1st Edition.

Hardback. Condition: New. 1st. Other volumes in the Wiley Series in Probability and MathematicalStatistics, Ralph A. Bradley, J. Stuart Hunter, David G. Kendall,and Geoffrey S. Watson, Advisory Editors Statistical Models inApplied Science Karl V. Bury Of direct interest to engineers andapplied scientists, this book presents general principles ofstatistics and specific distribution methods and models. Prominentdistribution properties and methods that are useful over a widerange of applications are covered in detail. The strengths andweaknesses of the distributional models are fully described, givingthe reader a firm, intuitive approach to the selection of the modelmost appropriate to the problem at hand. 1975 656 pp. FittingEquations To Data Computer Analysis of Multifactor Data forScientists and Engineers Cuthbert Daniel and Fred S. Wood Withthe assistance of John W. Gorman The purpose of this book is tohelp the serious data analyst, scientist, or engineer with acomputer to: recognize the strengths and limitations of his data;test the assumptions implicit in the least squares methods used tofit the data; select appropriate forms of the variables; judgewhich combinations of variables are most influential; and state theconditions under which the fitted equations are applicable.Throughout, mathematics is kept at the level of college algebra.1971 342 pp. Methods for Statistical Analysis of Reliability AndLife Data Nancy R. Mann, Ray E. Schafer and Nozer D. SingpurwallaThis book introduces failure models commonly used in reliabilityanalysis, and presents the most useful methods for analyzing thelife data of these models. Highlights include: material onaccelerated life testing; a comprehensive treatment of estimationand hypothesis testing; a critical survey of methods forsystem-reliability confidence bonds; and methods for simulation oflife data and for testing fit. 1974 564 pp.…

Hardcover. Condition: Brand New. 294 pages. 9.00x6.00x0.75 inches. In Stock.

Buch. Condition: Neu. Neuware - Other volumes in the Wiley Series in Probability and MathematicalStatistics, Ralph A. Bradley, J. Stuart Hunter, David G. Kendall,& Geoffrey S. Watson, Advisory Editors Statistical Models inApplied Science Karl V. Bury Of direct interest to engineers andapplied scientists, this book presents general principles ofstatistics and specific distribution methods and models. Prominentdistribution properties and methods that are useful over a widerange of applications are covered in detail. The strengths andweaknesses of the distributional models are fully described, givingthe reader a firm, intuitive approach to the selection of the modelmost appropriate to the problem at hand. 1975 656 pp. FittingEquations To Data Computer Analysis of Multifactor Data forScientists and Engineers Cuthbert Daniel & Fred S. Wood Withthe assistance of John W. Gorman The purpose of this book is tohelp the serious data analyst, scientist, or engineer with acomputer to: recognize the strengths and limitations of his data;test the assumptions implicit in the least squares methods used tofit the data; select appropriate forms of the variables; judgewhich combinations of variables are most influential; and state theconditions under which the fitted equations are applicable.Throughout, mathematics is kept at the level of college algebra.1971 342 pp. Methods for Statistical Analysis of Reliability AndLife Data Nancy R. Mann, Ray E. Schafer & Nozer D. SingpurwallaThis book introduces failure models commonly used in reliabilityanalysis, and presents the most useful methods for analyzing thelife data of these models. Highlights include: material onaccelerated life testing; a comprehensive treatment of estimationand hypothesis testing; a critical survey of methods forsystem-reliability confidence bonds; and methods for simulation oflife data and for testing fit. 1974 564 pp.…

Hardcover. Condition: new. Hardcover. Other volumes in the Wiley Series in Probability and MathematicalStatistics, Ralph A. Bradley, J. Stuart Hunter, David G. Kendall,& Geoffrey S. Watson, Advisory Editors Statistical Models inApplied Science Karl V. Bury Of direct interest to engineers andapplied scientists, this book presents general principles ofstatistics and specific distribution methods and models. Prominentdistribution properties and methods that are useful over a widerange of applications are covered in detail. The strengths andweaknesses of the distributional models are fully described, givingthe reader a firm, intuitive approach to the selection of the modelmost appropriate to the problem at hand. 1975 656 pp. FittingEquations To Data Computer Analysis of Multifactor Data forScientists and Engineers Cuthbert Daniel & Fred S. Wood Withthe assistance of John W. Gorman The purpose of this book is tohelp the serious data analyst, scientist, or engineer with acomputer to: recognize the strengths and limitations of his data;test the assumptions implicit in the least squares methods used tofit the data; select appropriate forms of the variables; judgewhich combinations of variables are most influential; and state theconditions under which the fitted equations are applicable.Throughout, mathematics is kept at the level of college algebra.1971 342 pp. Methods for Statistical Analysis of Reliability AndLife Data Nancy R. Mann, Ray E. Schafer & Nozer D. SingpurwallaThis book introduces failure models commonly used in reliabilityanalysis, and presents the most useful methods for analyzing thelife data of these models. Highlights include: material onaccelerated life testing; a comprehensive treatment of estimationand hypothesis testing; a critical survey of methods forsystem-reliability confidence bonds; and methods for simulation oflife data and for testing fit. 1974 564 pp. Other volumes in the Wiley Series in Probability and Mathematical Statistics, Ralph A. Bradley, J. Stuart Hunter, David G. Kendall, & Geoffrey S. Watson, Advisory Editors Statistical Models in Applied Science Karl V. Bury Of direct interest to engineers and applied scientists, this book presents general principles of statistics and specific distribution methods and models. Prominent distribution properties and methods that are useful over a wide range of applications are covered in detail. The strengths and weaknesses of the distributional models are fully described, giving the reader a firm, intuitive approach to the selection of the model most appropriate to the problem at hand. 1975 656 pp. Fitting Equations To Data Computer Analysis of Multifactor Data for Scientists and Engineers Cuthbert Daniel & Fred S. Wood With the assistance of John W. Gorman The purpose of this book is to help the serious data analyst, scientist, or engineer with a computer to: recognize the strengths and limitations of his data; test the assumptions implicit in the least squares methods used to fit the data; select appropriate forms of the variables; judge which combinations of variables are most influential; and state the conditions under which the fitted equations are applicable. Throughout, mathematics is kept at the level of college algebra. 1971 342 pp. Methods for Statistical Analysis of Reliability And Life Data Nancy R. Mann, Ray E. Schafer & Nozer D. Singpurwalla This book introduces failure models commonly used in reliability analysis, and presents the most useful methods for analyzing the life data of these models. Highlights include: material on accelerated life testing; acomprehensive treatment of estimation and hypothesis testing; a critical survey of methods for system-reliability confidence bonds; and methods for simulation of life data and for testing fit. 1974 564 pp. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Hardcover. Condition: Brand New. 294 pages. 9.00x6.00x0.75 inches. In Stock. This item is printed on demand.