Weiss Alex (410 results)

Condition: Fine. Used book that is in almost brand-new condition. May contain a remainder mark. Better World Books: Buy Books. Do Good.

Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Condition: acceptable. Fairly worn, but readable and intact. If applicable: Dust jacket, disc or access code may not be included.

Paperback. Condition: Very Good. Take-off: All about Radio Controlled Model Aircraft This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .…

Condition: Good. 0th Edition. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

Condition: Very Good. Dust Jacket Condition: 12306318. 1781454389. 6/14/2026 4:26:29 PM.

Paperback. Condition: Good. The book has been read but remains in clean condition. All pages are intact and the cover is intact. Some minor wear to the spine.

Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Paperback. Condition: Fair. A readable copy of the book which may include some defects such as highlighting and notes. Cover and pages may be creased and show discolouration.

Paperback. Condition: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Paperback. Condition: Very Good. This book describes the many varied materials used by model engineers in their workshops such as iron and steel, non-ferrous metals including aluminium, brass and copper, hard and soft woods and a number of engineering and other plastics. It also contains details about abrasives, adhesives, bearing materials, ceramics and refractory materials, coatings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solders. It provides an easy reference for those seeking the right material for the task or an item specified on plan. Packed full of useful information, the book is aimed at those who build model locomotives, traction, boat and stationary steam engines, oil, diesel, glow and petrol engines, gas turbines, artillery pieces, farming appliances, carriages and other road vehicles as well as those who make clocks and workshop tools. It is also directed at those working with full-size machinery, such as vintage cars, motor and pedal cycles, traction engines and railway locomotives. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.…

Condition: As New. Unread book in perfect condition.

Condition: As New. Unread book in perfect condition.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: New. This book describes the many varied materials used by model engineers in their workshops such as iron and steel, non-ferrous metals including aluminium, brass and copper, hard and soft woods and a number of engineering and other plastics. It also contains details about abrasives, adhesives, bearing materials, ceramics and refractory materials, coatings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solders. It provides an easy reference for those seeking the right material for the task or an item specified on plan. Packed full of useful information, the book is aimed at those who build model locomotives, traction, boat and stationary steam engines, oil, diesel, glow and petrol engines, gas turbines, artillery pieces, farming appliances, carriages and other road vehicles as well as those who make clocks and workshop tools. It is also directed at those working with full-size machinery, such as vintage cars, motor and pedal cycles, traction engines and railway locomotives.…

Condition: New.

Condition: New.

Paperback. Condition: New. This second edition of Workshop Electrics has been completely revised and updated to bring it in line with the latest advances in technology and to fully conform with BS7671 (17th edition of wiring regulations). A quarter of the illustrations are also new. The book deals with electricity in the workshop and includes everything from fitting a 13amp plug to wiring up a new workshop building. Safety, a key issue is covered as well as inspection and testing. Starting with the planning necessary before electrical installation commences, the book then deals with the fusing, equipment, lighting, fixtures, fittings and wiring for 230-volt mains electricity. Further chapters cover outside workshops, three-phase supplies and a range of low-voltage equipment. Finally there is a glossary, a list of useful addresses and an index.…

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Paperback. Condition: New. This book describes the many varied materials used by model engineers in their workshops such as iron and steel, non-ferrous metals including aluminium, brass and copper, hard and soft woods and a number of engineering and other plastics. It also contains details about abrasives, adhesives, bearing materials, ceramics and refractory materials, coatings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solders. It provides an easy reference for those seeking the right material for the task or an item specified on plan. Packed full of useful information, the book is aimed at those who build model locomotives, traction, boat and stationary steam engines, oil, diesel, glow and petrol engines, gas turbines, artillery pieces, farming appliances, carriages and other road vehicles as well as those who make clocks and workshop tools. It is also directed at those working with full-size machinery, such as vintage cars, motor and pedal cycles, traction engines and railway locomotives.…

Paperback. Condition: New. This second edition of Workshop Electrics has been completely revised and updated to bring it in line with the latest advances in technology and to fully conform with BS7671 (17th edition of wiring regulations). A quarter of the illustrations are also new. The book deals with electricity in the workshop and includes everything from fitting a 13amp plug to wiring up a new workshop building. Safety, a key issue is covered as well as inspection and testing. Starting with the planning necessary before electrical installation commences, the book then deals with the fusing, equipment, lighting, fixtures, fittings and wiring for 230-volt mains electricity. Further chapters cover outside workshops, three-phase supplies and a range of low-voltage equipment. Finally there is a glossary, a list of useful addresses and an index.…

Condition: New.

Paperback. Condition: New. Making a major purchase of a lathe, a milling machine or combination lathe/mill, whether manually operated or using computer numerical control (CNC), is a daunting prospect for any model engineer. This book provides practical advice on how to make the selection bearing in mind the particular needs of the individual. It provides descriptions and technical data about the wide range of machines and accessories available from UK, European, American and Far East manufacturers. It also looks at the many different types of tooling fixtures and accessories that may be required. This book will be welcomed by all model engineers who are setting up a home workshop or planning a major equipment acquisition.…

Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

paperback. Condition: New. Brand new book, sourced directly from publisher. Dispatch time is 24-48 hours from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

paperback. Condition: New. Brand new book, sourced directly from publisher. Dispatch time is 24-48 hours from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

Condition: very_good.

Condition: Good. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

Paperback. Condition: New. A comprehensive guide to the use of plastics in the many and varied fields of modelling. This book describes the various types and forms of plastics and details their useful characteristics, strengths and weaknesses. It also explains how to source them, how to work with them when making models and examines their applications in each of the many and varied branches of modelling: flying model aircraft; rockets; model power boats, yachts and submarines; model cars; plastic kits; scratchbuilt models of aircraft, ships, spacecraft and cars; figures for aircraft, boats, cars, fantasy games, military modelling or railway layouts; buildings for dolls, railways or wargaming; railway locomotives and rolling stock (7.5 inch to N gauge); Model engineering models and tools; electronics. Well illustrated with informative line drawings, instructive photographs and amusing cartoons, the book is a mine of information which explains why you might choose, or prefer to substitute, plastics for the more commonly used materials such as wood and metal. Alex Weiss has first-hand experience both of working in many different areas of modelling and of using the majority of the materials described.He has packed a lifetime of working with plastics into this concise and practical book.…