Swift Seth M (28 results)

Condition: New.

Paperback or Softback. Condition: New. Q-Switched and Mode Locked Short Pulses From a Diode Pumped, YB-Doped Fiber Laser. Book.

Condition: As New. Unread book in perfect condition.

Condition: New.

Condition: New. In.

Condition: New.

Condition: As New. Unread book in perfect condition.

PAP. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Taschenbuch. Condition: Neu. Neuware - A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr4+: YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laserwere performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watt (W) while pumping at 8.3 W, yielding 60% efficiency and peak spectral outputs between 1087-1108 nm. Passive Q-switched pulses were generated using the Cr4+: YAGcrystal with a mean width of 2.9 s and repetition rates between 60-150 kHz. This corresponded to pulse energies of 7-24 and peak powers twice as high as the average power. Q-switched and possible mode locked pulses were generated using NPR. Q-switched pulse widths ranged between 1.8-2.8 with repetition rates between 29-72 kHz. Mode locked pulse widths were 10.5 ns with a repletion rate of 17.2 MHz. Mode locking was not achieved using the SESAM, but the results that resemble mode beating are presented, and causes for error were analyzed.

PAP. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Buch. Condition: Neu. Neuware - A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr4+: YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laserwere performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watt (W) while pumping at 8.3 W, yielding 60% efficiency and peak spectral outputs between 1087-1108 nm. Passive Q-switched pulses were generated using the Cr4+: YAGcrystal with a mean width of 2.9 s and repetition rates between 60-150 kHz. This corresponded to pulse energies of 7-24 and peak powers twice as high as the average power. Q-switched and possible mode locked pulses were generated using NPR. Q-switched pulse widths ranged between 1.8-2.8 with repetition rates between 29-72 kHz. Mode locked pulse widths were 10.5 ns with a repletion rate of 17.2 MHz. Mode locking was not achieved using the SESAM, but the results that resemble mode beating are presented, and causes for error were analyzed.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

PAP. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: New. Print on Demand.

HRD. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Condition: New. Print on Demand.

Condition: New. Print on Demand.

Condition: New. Print on Demand.

Condition: New. PRINT ON DEMAND.

HRD. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Condition: New. PRINT ON DEMAND.

Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Condition: New. Print on Demand.

Condition: New. Print on Demand.

Condition: New. PRINT ON DEMAND.

Paperback. Condition: new. Paperback. A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr4+: YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laserwere performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watt (W) while pumping at 8.3 W, yielding 60% efficiency and peak spectral outputs between 1087-1108 nm. Passive Q-switched pulses were generated using the Cr4+: YAGcrystal with a mean width of 2.9 s and repetition rates between 60-150 kHz. This corresponded to pulse energies of 7-24 and peak powers twice as high as the average power. Q-switched and possible mode locked pulses were generated using NPR. Q-switched pulse widths ranged between 1.8-2.8 with repetition rates between 29-72 kHz. Mode locked pulse widths were 10.5 ns with a repletion rate of 17.2 MHz. Mode locking was not achieved using the SESAM, but the results that resemble mode beating are presented, and causes for error were analyzed.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Hardcover. Condition: new. Hardcover. A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr4+: YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laserwere performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watt (W) while pumping at 8.3 W, yielding 60% efficiency and peak spectral outputs between 1087-1108 nm. Passive Q-switched pulses were generated using the Cr4+: YAGcrystal with a mean width of 2.9 s and repetition rates between 60-150 kHz. This corresponded to pulse energies of 7-24 and peak powers twice as high as the average power. Q-switched and possible mode locked pulses were generated using NPR. Q-switched pulse widths ranged between 1.8-2.8 with repetition rates between 29-72 kHz. Mode locked pulse widths were 10.5 ns with a repletion rate of 17.2 MHz. Mode locking was not achieved using the SESAM, but the results that resemble mode beating are presented, and causes for error were analyzed.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.