Lutfor Rahman (24 results)

Paperback. Condition: Very Good. No Dust Jacket. Size: 8vo - over 7¾" - 9¾".

Condition: New. pp. xx + 284 Figures Maps.

Condition: New. pp. xx + 284, Maps, Index 1st Published.

Fifth Edition. Near fine copy in the original printed stiff-card wrappers. Front panel very slightly speckled. Interior not affected. Particularly and uncommonly well-preserved; tight, bright, clean and sharp-cornered. ; 56 pages; Description: 56 p. Ill. Subjects: Sircar, Muhammad Ali. Electric engineers - Bangladesh - Biography. Authors, Bengali - 20th century, Biography. 1 Kg.…

Condition: New.

Condition: New. pp. xx + 284, Abbreviations Acknowledgements.

Condition: As New. Unread book in perfect condition.

Fifth Edition. Near fine copy in the original printed stiff-card wrappers. Front panel very slightly speckled. Interior not affected. Particularly and uncommonly well-preserved; tight, bright, clean and sharp-cornered. ; 56 pages; Description: 56 p. Ill. Subjects: Sircar, Muhammad Ali. Electric engineers - Bangladesh - Biography. Authors, Bengali - 20th century, Biography. 1 Kg.…

Hardbound. Condition: As New. New. Contents Acknowledgement. Preface. Introduction. 1. Minorities of Bangladesh and their alienation. 2. Religious symbolism and problems of national identity. 3. Nationalism conflicts in political perceptions. 4. Elite mass gap a stigma of the nation. 5. Legitimacy crises a handicap in nation building. Conclusion. Appendices. Bibliography. Index. At birth Bangladesh was a homogenous nation state with a promise to make every house a happy home. But soon after its birth schismatic tendencies developed because of the ill motive and machinations of certain political forces. The lack of a clear perception of the civil society and of the politicians about Bengali nationalism and nation state of Bangladesh resulted in some ambiguity about their identity. Additionally the military rulers during their term of office impaired the constitution and dichotomized the nation in order to create their own power base. The ultimate result is a dichotomized nation. All initiatives to reverse the trend in conformity with the fundamental spirit of the War of Liberation have only aggravated the situation today to a more complex and contentious one. Meanwhile the citizen's of the country played the role of spectators. They have witnessed unprecedented corruption terrorism and Islamic fundamentalism which have pushed the state to the verge of a failed state. The author in the present book makes an earnest endeavour to explain the process of dichotomy and have suggested ways towards achieving the goals of the War of Liberation so as to put the course of history right and embrace unity peace and prosperity of the People of Bangladesh. 284 pp.…

Condition: As New. Unread book in perfect condition.

Condition: New.

Condition: Good. fifth edition, softcover, xviii, 57, {2} pp., small hand stamp to front cover, old water stains to top edge, text clean, overall good. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Condition: New.

Condition: New. In.

Paperback. Condition: New.

Taschenbuch. Condition: Neu. Closed Loop Pulsating Heat Pipe | Heat Transfer Characteristics of a Closed Loop Pulsating Heat Pipe with Fin and Wire Insert | M. Lutfor Rahman (u. a.) | Taschenbuch | 160 S. | Englisch | 2016 | LAP LAMBERT Academic Publishing | EAN 9783659719172 | Verantwortliche Person für die EU: OmniScriptum GmbH & Co. KG, Bahnhofstr. 28, 66111 Saarbrücken, info[at]akademikerverlag[dot]de | Anbieter: preigu.…

paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

orig.boards. Condition: Rubbed. Binding stains. Good. 22x14cm, 123 pp. Entirely in Bangla characters. "Dramatic Works of the Garo People".

PAP. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Pulsating heat pipes (PHP) have created a newer arena and promising possibilities as passive devices for heat transfer applications, especially suited for thermal management of electronics. A closed loop pulsating heat pipe (CLPHP) made of copper with 2.5 mm ID and 3 mm OD with fin in the condenser section is used in the present work to evaluate the heat transfer performances where the evaporation section is 50 mm, adiabatic section is 120 mm and condensation section is 80 mm. The attempt is to analyze and compare the effects on the heat transfer performances of CLPHP with finned, fin-inserted and un-finned condenser section with inclination angle of 0_ (vertical), 30_ and 45_. Methanol and Ethanol are used as working fluids with 50% filling ratio in CLPHP with 8 loops during the experimentation. The experimental results indicate a strong influence of gravity and thermo physical properties of the working fluid on the performance of the CLPHP studied with different orientation and heat load. The results demonstrate the effect of fin and fin-insert used in condenser section, the input heat flux, inclination angle orientation and physio-chemical properties of the working fluid. 160 pp. Englisch.…

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Rahman M. LutforBrig Gen M Lutfor Rahman is a Bangladesh Army Officer, now serving as Academic Dean of Mechanical Engineering Faculty, MIST, Bangladesh. Dr. Mohammad Ali is a Professor and senior faculty member of BUET, Bangladesh. R.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Pulsating heat pipes (PHP) have created a newer arena and promising possibilities as passive devices for heat transfer applications, especially suited for thermal management of electronics. A closed loop pulsating heat pipe (CLPHP) made of copper with 2.5 mm ID and 3 mm OD with fin in the condenser section is used in the present work to evaluate the heat transfer performances where the evaporation section is 50 mm, adiabatic section is 120 mm and condensation section is 80 mm. The attempt is to analyze and compare the effects on the heat transfer performances of CLPHP with finned, fin-inserted and un-finned condenser section with inclination angle of 0¿ (vertical), 30¿ and 45¿. Methanol and Ethanol are used as working fluids with 50% filling ratio in CLPHP with 8 loops during the experimentation. The experimental results indicate a strong influence of gravity and thermo physical properties of the working fluid on the performance of the CLPHP studied with different orientation and heat load. The results demonstrate the effect of fin and fin-insert used in condenser section, the input heat flux, inclination angle orientation and physio-chemical properties of the working fluid.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 160 pp. Englisch.…

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Pulsating heat pipes (PHP) have created a newer arena and promising possibilities as passive devices for heat transfer applications, especially suited for thermal management of electronics. A closed loop pulsating heat pipe (CLPHP) made of copper with 2.5 mm ID and 3 mm OD with fin in the condenser section is used in the present work to evaluate the heat transfer performances where the evaporation section is 50 mm, adiabatic section is 120 mm and condensation section is 80 mm. The attempt is to analyze and compare the effects on the heat transfer performances of CLPHP with finned, fin-inserted and un-finned condenser section with inclination angle of 0_ (vertical), 30_ and 45_. Methanol and Ethanol are used as working fluids with 50% filling ratio in CLPHP with 8 loops during the experimentation. The experimental results indicate a strong influence of gravity and thermo physical properties of the working fluid on the performance of the CLPHP studied with different orientation and heat load. The results demonstrate the effect of fin and fin-insert used in condenser section, the input heat flux, inclination angle orientation and physio-chemical properties of the working fluid.…