Iffa Mohd Arrif (14 results)
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: Brook Bookstore On Demand, Napoli, NA, ItalyBrook Bookstore On Demand
Contact seller5-star sellerCondition: New
£ 40.56
£ 5.79 shippingShips from Italy to U.S.A.Quantity: 5 available
Condition: new.
High-Flexion Knee Prosthesis: Design and Finite Element Analysis (FEA)
Arrif, Iffa Mohd (Author)/ Shuib, Solehuddin (Author)/ Ghani, Amir Radzi Ab (Author)
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 44.99
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 125 pages. 9.25x6.10x9.25 inches. In Stock.
Language: English
Published by Springer Nature Switzerland AG, Cham, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: Grand Eagle Retail, Bensenville, IL, U.S.A.Grand Eagle Retail
Contact seller5-star sellerCondition: New
£ 57.93
Free ShippingShips within U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modifica…tions process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: Brook Bookstore, Milano, MI, ItalyBrook Bookstore
Contact seller5-star sellerCondition: New
£ 36.40
£ 23.85 shippingShips from Italy to U.S.A.Quantity: 5 available
Condition: new.
High-Flexion Knee Prosthesis: Design and Finite Element Analysis (FEA)
Arrif, Iffa Mohd (Author)/ Shuib, Solehuddin (Author)/ Ghani, Amir Radzi Ab (Author)
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 64.22
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 125 pages. 9.25x6.10x9.25 inches. In Stock.
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 76.26
£ 2.98 shippingShips within U.S.A.Quantity: 4 available
Condition: New.
Language: English
Published by Springer Nature Switzerland AG, Cham, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: CitiRetail, Stevenage, United KingdomCitiRetail
Contact seller5-star sellerCondition: New
£ 46.49
£ 37.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modifica…tions process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
Language: English
Published by Springer, Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 51.24
£ 52.07 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model struct…ures using CAD software. The design modifications process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation.
Language: English
Published by Springer Nature Switzerland AG, Cham, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
Seller: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contact seller5-star sellerCondition: New
£ 83.38
£ 27.64 shippingShips from Australia to U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modifica…tions process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Language: English
Published by Springer, Berlin, Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 46.93
£ 19.59 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create… 3D model structures using CAD software. The design modifications process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. 94 pp. Englisch.
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
- Print on Demand
Seller: Majestic Books, Hounslow, United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 77.01
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 4 available
Condition: New. Print on Demand.
Language: English
Published by Springer Verlag GmbH, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 42.44
£ 41.74 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.
Language: English
Published by Springer, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
- Print on Demand
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 79.19
£ 8.48 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND.
Language: English
Published by Springer, Springer Okt 2025, 2025
Series: SpringerBriefs in Applied Sciences and Technology, Book 428 of 472. Book 428 of 472 - SpringerBriefs in Applied Sciences and Technology
- Softcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
£ 46.93
£ 51.12 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D…model structures using CAD software. The design modifications' process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 124 pp. Englisch.
