Aspin Terry A (29 results)
- Softcover
Seller: Zoom Books East, Glendale Heights, IL, U.S.A.Zoom Books East
Contact seller5-star sellerCondition: Used - Good
£ 4.88
Free ShippingShips within U.S.A.Quantity: 1 available
Condition: good. Book is in good condition and may include underlining highlighting and minimal wear. The book can also include "From the library of" labels. May not contain miscellaneous items toys, dvds, etc. . We offer 100% money back guarantee and 24 7 customer service.
Language: English
Published by Fox Chapel Publishing Company, Incorporated, 1998
- Softcover
Seller: Better World Books, Mishawaka, IN, U.S.A.Better World Books
Contact seller5-star sellerCondition: Used - Good
£ 9.22
Free ShippingShips within U.S.A.Quantity: 1 available
Condition: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
- Softcover
Seller: WorldofBooks, Goring-By-Sea, WS, United KingdomWorldofBooks
Contact seller5-star sellerCondition: Used - Very good
£ 3.66
£ 5.60 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
- Softcover
Seller: Bank of Books, Ventura, CA, U.S.A.Bank of Books
Contact seller5-star sellerCondition: New
£ 6.41
£ 3.13 shippingShips within U.S.A.Quantity: 1 available
paperback. Condition: New. We have 75,000 books to choose from -- Ship within 24 hours -- Satisfaction Guaranteed.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves.com USA, London, LONDO, United KingdomRarewaves.com USA
Contact seller5-star sellerCondition: New
£ 11.42
Free ShippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
- Softcover
Seller: PBShop.store US, Wood Dale, IL, U.S.A.PBShop.store US
Contact seller5-star sellerCondition: New
£ 12.62
Free ShippingShips within U.S.A.Quantity: 3 available
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves.com USA, London, LONDO, United KingdomRarewaves.com USA
Contact seller5-star sellerCondition: New
£ 12.94
Free ShippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Paperback. Condition: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many re…visions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves USA, HEBRON, KY, U.S.A.Rarewaves USA
Contact seller5-star sellerCondition: New
£ 13.75
Free ShippingShips within U.S.A.Quantity: 3 available
Paperback. Condition: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves USA, HEBRON, KY, U.S.A.Rarewaves USA
Contact seller5-star sellerCondition: New
£ 13.75
Free ShippingShips within U.S.A.Quantity: 1 available
Paperback. Condition: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many re…visions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
Language: English
Published by Fox Chapel Publishers International, Hemel Hempstead, 1998
- Softcover
Seller: Grand Eagle Retail, Bensenville, IL, U.S.A.Grand Eagle Retail
Contact seller5-star sellerCondition: New
£ 14.80
Free ShippingShips within U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings…or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Language: English
Published by Fox Chapel Publishers International, Hemel Hempstead, 1998
- Softcover
Seller: Grand Eagle Retail, Bensenville, IL, U.S.A.Grand Eagle Retail
Contact seller5-star sellerCondition: New
£ 14.89
Free ShippingShips within U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have b…een many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
- Softcover
Seller: PBShop.store UK, Fairford, GLOS, United KingdomPBShop.store UK
Contact seller5-star sellerCondition: New
£ 12.13
£ 3.29 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Seller: PBShop.store UK, Fairford, GLOS, United KingdomPBShop.store UK
Contact seller5-star sellerCondition: New
£ 12.13
£ 3.29 shippingShips from United Kingdom to U.S.A.Quantity: 6 available
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 12.22
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Condition: New. In.
- Softcover
Seller: Chiron Media, Wallingford, United KingdomChiron Media
Contact seller5-star sellerCondition: New
£ 9.15
£ 15.49 shippingShips from United Kingdom to U.S.A.Quantity: 10 available
paperback. Condition: New.
- Softcover
Seller: Chiron Media, Wallingford, United KingdomChiron Media
Contact seller5-star sellerCondition: New
£ 9.44
£ 15.49 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
paperback. Condition: New.
- Softcover
Seller: Hay-on-Wye Booksellers, Hay-on-Wye, HEREF, United KingdomHay-on-Wye Booksellers
Contact seller4-star sellerCondition: Used - Good
£ 4.25
£ 25.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: Good. Like New except book is missing its Dust Cover.
Language: English
Published by Fox Chapel Publishers International Dez 1998, 1998
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 11.02
£ 26.14 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Neuware - This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have…been many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
Language: English
Published by Fox Chapel Publishers International, Hemel Hempstead, 1998
- Softcover
Seller: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contact seller5-star sellerCondition: New
£ 22.14
£ 27.21 shippingShips from Australia to U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have b…een many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Language: English
Published by Fox Chapel Publishers International, Hemel Hempstead, 1998
- Softcover
Seller: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contact seller5-star sellerCondition: New
£ 22.14
£ 27.21 shippingShips from Australia to U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings…or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Language: English
Published by Fox Chapel Publishers International, Hemel Hempstead, 1998
- Softcover
Seller: CitiRetail, Stevenage, United KingdomCitiRetail
Contact seller5-star sellerCondition: New
£ 13.49
£ 37.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. At one time most towns of any size had somewhere a small foundry which would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Those days are no more and model engineers in many areas must either adapt commerically available castings…or send away to a specialist foundry which will undertake small work, often at some expense and with some delay. The alternative is to set up a home foundry and to make one's own patterns and castings. This text covers all the basic principles of foundry work, describes materials and techniques, pattern-making, moulding boxes, cores and core-boxes, metals, all types of furnaces, and includes step-by-step procedures with examples of cylinders and wheels. This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
Language: English
Published by Fox Chapel Publishers International, Hemel Hempstead, 1998
- Softcover
Seller: CitiRetail, Stevenage, United KingdomCitiRetail
Contact seller5-star sellerCondition: New
£ 13.49
£ 37.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Paperback. Condition: new. Paperback. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have b…een many revisions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive. This book is regarded as the perfect introduction to casting work in common metals. This new edition brings everything right up to date additional copy with new photographs and redrawn illustrations of the latest amateur foundry technology. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves USA United, HEBRON, KY, U.S.A.Rarewaves USA United
Contact seller5-star sellerCondition: New
£ 14.74
£ 36.77 shippingShips within U.S.A.Quantity: 3 available
Paperback. Condition: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves USA United, HEBRON, KY, U.S.A.Rarewaves USA United
Contact seller5-star sellerCondition: New
£ 14.74
£ 36.77 shippingShips within U.S.A.Quantity: 1 available
Paperback. Condition: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many re…visions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
Language: English
Published by Fox Chapel Publishers International Dez 1998, 1998
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 13.51
£ 52.06 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Neuware - At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially av…ailable castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves.com UK, London, United KingdomRarewaves.com UK
Contact seller5-star sellerCondition: New
£ 10.05
£ 65.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: New. At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available cast…ings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 15.93
£ 59.99 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. The Backyard Foundry | Terry A. Aspin | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 1998 | Fox Chapel Publishers International | EAN 9781854861467 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: pre…igu.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 15.93
£ 59.99 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Foundrywork for the Amateur | Terry A. Aspin | Taschenbuch | Workshop Practice Series | Kartoniert / Broschiert | Englisch | 1998 | Fox Chapel Publishers International | EAN 9781854861689 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbiet…er: preigu.
Language: English
Published by Fox Chapel Publishers International, GB, 1998
- Softcover
Seller: Rarewaves.com UK, London, United KingdomRarewaves.com UK
Contact seller5-star sellerCondition: New
£ 10.83
£ 65.00 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Paperback. Condition: New. This book is regarded as the perfect introduction to casting common hot metals in moulds, providing all the information needed by amateur foundrymen. Since 1954, when Foundrywork for the Amateur was first published, the advance of technology and engineering has been enormous and there have been many re…visions along the way. However, conditions in the 21st century are so far removed from the state of affairs in the 1950s that, although the basic principle of the foundry remains the same, the language and the presentation of the book was due to be uplifted. This present edition therefore represents a complete rewrite to conform to the era and, in particular, to the availability of material which at one time was taken for granted. Not only has the text been updated, but the illustrations have been completely redrawn and, on the basis of the advances made in the amateur foundry since the early days, the photographs have also been renewed and increased in number. This new edition also reflects the author's growing interest in the model steam locomotive.
