Variational Methods Mathematics Science by Rektorys Karel (34 results)

27 × 20 cm, cloth hardcover, 572 pages, text in English, few stains on covers and edges, paper slightly browned, although in very good condition, see picture. Published as a comprehensive treatise on variational methods in applied mathematics and engineering. Provides foundational theory in calculus of variations, Hilbert space frameworks, numerical boundary-value methods and related applications. 1720g.

Hardcover- Großformat. Condition: Gut. 571 Seiten Das hier angebotene Buch stammt aus einer teilaufgelösten Bibliothek und kann die entsprechenden Kennzeichnungen aufweisen (Rückenschild, Instituts-Stempel.); der Buchzustand ist ansonsten ordentlich und dem Alter entsprechend gut. Text in ENGLISCHER Sprache. Sprache: Englisch Gewicht in Gramm: 1765.

Hardcover/Großformat. Condition: Gut. 571 Seiten Leichte altersbedingte Anbräunung des Papiers. Schnitt fleckig; der Buchzustand ist ansonsten ordentlich und dem Alter entsprechend gut. ENGLISCH. Sprache: Englisch Gewicht in Gramm: 1780.

Condition: New. In.

Groß - 8° / Large - 8°, 571 S./pp., Originalleineneinband (publisher's cloth binding), Bibliotheksexemplar in gutem Zustand / exlibrary in good condition (Einband gering gebrauchsspurig / binding shows minor tear and wear, Stempel auf Titel / title stamped, Rückenschildchen / lettering pannel to the spine, Block sehr gut / contents clean, keine Unterstreichungen oder Anstreichungen / no underlining or remarks, nicht in Folie eingeschlagen / not wrapped up in foil), Sprache: englisch.

Hard Cover. Condition: Acceptable. No Jacket. Ex-library with the usual features. The interior is clean and tight. Front hinge is weak but holding. Cover is slightly faded and edge worn. Corners are lightly bumped. 571 pages. Ex-Library.

Condition: New.

Condition: New. SUPER FAST SHIPPING.

Condition: New.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The impulse which led to the writing of the present book has emerged from my many years of lecturing in special courses for selected students at the College of Civil Engineering of the Tech nical University in Prague, from experience gained as supervisor and consultant to graduate students-engineers in the field of applied mathematics, and - last but not least - from frequent consultations with technicians as well as with physicists who have asked for advice in overcoming difficulties encountered in solving theoretical problems. Even though a varied combination of problems of the most diverse nature was often in question, the problems discussed in this book stood forth as the most essential to this category of specialists. The many discussions I have had gave rise to considerations on writing a book which should fill the rather unfortunate gap in our literature. The book is designed, in the first place, for specialists in the fields of theoretical engineering and science. However, it was my aim that the book should be of interest to mathematicians as well. I have been well aware what an ungrateful task it may be to write a book of the present type, and what problems such an effort can bring: Technicians and physicists on the one side, and mathematicians on the other, are often of diametrically opposing opinions as far as books con ceived for both these categories are concerned.

Condition: As New. Unread book in perfect condition.

Condition: New. Num Pages: 571 pages, biography. BIC Classification: PBW; PD; TBC. Category: (P) Professional & Vocational. Dimension: 280 x 210 x 30. Weight in Grams: 1402. . 2012. Softcover reprint of the original 1st ed. 1977. Paperback. . . . .

Condition: New. Num Pages: 571 pages, biography. BIC Classification: PBW; PD; TBC. Category: (P) Professional & Vocational. Dimension: 280 x 210 x 30. Weight in Grams: 1402. . 2012. Softcover reprint of the original 1st ed. 1977. Paperback. . . . . Books ship from the US and Ireland.

Paperback. Condition: new. Paperback. The impulse which led to the writing of the present book has emerged from my many years of lecturing in special courses for selected students at the College of Civil Engineering of the Tech nical University in Prague, from experience gained as supervisor and consultant to graduate students-engineers in the field of applied mathematics, and - last but not least - from frequent consultations with technicians as well as with physicists who have asked for advice in overcoming difficulties encountered in solving theoretical problems. Even though a varied combination of problems of the most diverse nature was often in question, the problems discussed in this book stood forth as the most essential to this category of specialists. The many discussions I have had gave rise to considerations on writing a book which should fill the rather unfortunate gap in our literature. The book is designed, in the first place, for specialists in the fields of theoretical engineering and science. However, it was my aim that the book should be of interest to mathematicians as well. I have been well aware what an ungrateful task it may be to write a book of the present type, and what problems such an effort can bring: Technicians and physicists on the one side, and mathematicians on the other, are often of diametrically opposing opinions as far as books con ceived for both these categories are concerned. The impulse which led to the writing of the present book has emerged from my many years of lecturing in special courses for selected students at the College of Civil Engineering of the TechA nical University in Prague, from experience gained as supervisor and consultant to graduate students-engineers in the field of applied mathematics, and - last but not least - from frequent consultations with technicians as well as with physicists who have asked for advice in overcoming difficulties encountered in solving theoretical problems. Even though a varied combination of problems of the most diverse nature was often in question, the problems discussed in this book stood forth as the most essential to this category of specialists. The many discussions I have had gave rise to considerations on writing a book which should fill the rather unfortunate gap in our literature. The book is designed, in the first place, for specialists in the fields of theoretical engineering and science. However, it was my aim that the book should be of interest to mathematicians as well. I have been well aware what an ungrateful task it may be to write a book of the present type, and what problems such an effort can bring: Technicians and physicists on the one side, and mathematicians on the other, are often of diametrically opposing opinions as far as books conA ceived for both these categories are concerne Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Hard Cover. Condition: Good. No jacket. Small stain on front board. Spine is shaken, but text block is secure. Inside is clean and unmarked.

Condition: New.

Condition: New.

Condition: As New. Unread book in perfect condition.

Condition: New. pp. 576 2nd Edition.

Condition: New. Num Pages: 571 pages, biography. BIC Classification: PBK. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 297 x 210 x 31. Weight in Grams: 1202. . 1980. 2nd ed. 1980. Hardback. . . . .

Hardcover. Condition: UsedGood. Hardcover; translated from the Czech by Michael Basch, 1975; fading, shelf wear, and a few discolored spots to exterior; corners bumped; stain to back bottom corner; otherwise in good condition with clean text, firm binding.

Paperback. Condition: new. Paperback. The impulse which led to the writing of the present book has emerged from my many years of lecturing in special courses for selected students at the College of Civil Engineering of the Tech nical University in Prague, from experience gained as supervisor and consultant to graduate students-engineers in the field of applied mathematics, and - last but not least - from frequent consultations with technicians as well as with physicists who have asked for advice in overcoming difficulties encountered in solving theoretical problems. Even though a varied combination of problems of the most diverse nature was often in question, the problems discussed in this book stood forth as the most essential to this category of specialists. The many discussions I have had gave rise to considerations on writing a book which should fill the rather unfortunate gap in our literature. The book is designed, in the first place, for specialists in the fields of theoretical engineering and science. However, it was my aim that the book should be of interest to mathematicians as well. I have been well aware what an ungrateful task it may be to write a book of the present type, and what problems such an effort can bring: Technicians and physicists on the one side, and mathematicians on the other, are often of diametrically opposing opinions as far as books con ceived for both these categories are concerned. The impulse which led to the writing of the present book has emerged from my many years of lecturing in special courses for selected students at the College of Civil Engineering of the TechA nical University in Prague, from experience gained as supervisor and consultant to graduate students-engineers in the field of applied mathematics, and - last but not least - from frequent consultations with technicians as well as with physicists who have asked for advice in overcoming difficulties encountered in solving theoretical problems. Even though a varied combination of problems of the most diverse nature was often in question, the problems discussed in this book stood forth as the most essential to this category of specialists. The many discussions I have had gave rise to considerations on writing a book which should fill the rather unfortunate gap in our literature. The book is designed, in the first place, for specialists in the fields of theoretical engineering and science. However, it was my aim that the book should be of interest to mathematicians as well. I have been well aware what an ungrateful task it may be to write a book of the present type, and what problems such an effort can bring: Technicians and physicists on the one side, and mathematicians on the other, are often of diametrically opposing opinions as far as books conA ceived for both these categories are concerne Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Condition: New. pp. 576.

Condition: New. Num Pages: 571 pages, biography. BIC Classification: PBK. Category: (G) General (US: Trade). Dimension: 254 x 178 x 29. Weight in Grams: 1016. . 2001. 2nd ed. 1980. Paperback. . . . .

Condition: New. Num Pages: 571 pages, biography. BIC Classification: PBK. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 297 x 210 x 31. Weight in Grams: 1202. . 1980. 2nd ed. 1980. Hardback. . . . . Books ship from the US and Ireland.

Hardcover. Condition: UsedGood. Hardcover; 2nd edition; translated from the Czech by Michael Basch, 1975; surplus library copy with the usual stampings; reference number taped to spine; fading and shelf wear to exterior; corners bumped; otherwise in good condition with clean text, firm binding.

Condition: New.

Condition: New. Num Pages: 571 pages, biography. BIC Classification: PBK. Category: (G) General (US: Trade). Dimension: 254 x 178 x 29. Weight in Grams: 1016. . 2001. 2nd ed. 1980. Paperback. . . . . Books ship from the US and Ireland.

Hardcover. Condition: Very Good+. Dust Jacket Condition: No Dust Jacket. Second Edition. Book is covered in mylar and has owners name and affiliations on flyleaf; 4to 11" - 13" tall; 571 pages.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The impulse which led to the writing of the present book has emerged from my many years of lecturing in special courses for selected students at the College of Civil Engineering of the Tech nical University in Prague, from experience gained as supervisor and consultant to graduate students-engineers in the field of applied mathematics, and - last but not least - from frequent consultations with technicians as well as with physicists who have asked for advice in overcoming difficulties encountered in solving theoretical problems. Even though a varied combination of problems of the most diverse nature was often in question, the problems discussed in this book stood forth as the most essential to this category of specialists. The many discussions I have had gave rise to considerations on writing a book which should fill the rather unfortunate gap in our literature. The book is designed, in the first place, for specialists in the fields of theoretical engineering and science. However, it was my aim that the book should be of interest to mathematicians as well. I have been well aware what an ungrateful task it may be to write a book of the present type, and what problems such an effort can bring: Technicians and physicists on the one side, and mathematicians on the other, are often of diametrically opposing opinions as far as books con ceived for both these categories are concerned. 576 pp. Englisch.