Parallel Processing Digital Control by Nocetti D Fabian (16 results)
- Softcover
Seller: Zubal-Books, Since 1961, Cleveland, U.S.A.Zubal-Books, Since 1961
Contact seller5-star sellerCondition: Used - Good
£ 8.78
£ 3.36 shippingShips within U.S.A.Quantity: 1 available
Condition: Good. 145 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
Language: English
Published by Springer-Verlag, New York, Berlin, Heidelberg 1992
- Hardcover
Seller: Munster & Company LLC, ABAA/ILAB, Corvallis, U.S.A.Munster & Company LLC, ABAA/ILAB
Contact seller5-star sellerCondition: Used - Very good
£ 11.53
£ 1.46 shippingShips within U.S.A.Quantity: 1 available
Hardcover. Condition: Very Good. New York, Berlin, Heidelberg: Springer-Verlag, 1992. 145 pp. 25 x 17 cm. Glossy paper covered boards printed in red, grey and black. Rubbing to spine ends and corners of boards. Light age toning to edges of text block. Interior is clean and unmarked. Binding firm. Hard Cover. Very Good.
Published by Springer Verlag, Berlin 1992
- Hardcover
Seller: L'ivre d'Histoires, Merbes Sainte Marie, BelgiumL'ivre d'Histoires
Contact seller5-star sellerCondition: Used - Near fine
£ 6.70
£ 32.67 shippingShips from Belgium to U.S.A.Quantity: 1 available
Add to basketCouverture rigide. Condition: Bon. Collection "Advances in industrial control", 146 pages, avec 79 figures, petit cachet de propriétaire en page de titre.
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 50.43
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Softcover
Seller: Books Puddle, New York, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 65.84
£ 2.98 shippingShips within U.S.A.Quantity: 4 available
Condition: New. pp. 166.
- Softcover
Seller: Revaluation Books, Exeter, United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 64.74
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 159 pages. 9.53x6.69x0.37 inches. In Stock.
More images- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 44.85
£ 60.65 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Parallel Processing in Digital Control | D. Fabian Garcia Nocetti (u. a.) | Taschenbuch | Advances in Industrial Control | xiv | Englisch | 2011 | Springer | EAN 9781447119470 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]sprin…ger[dot]com | Anbieter: preigu.
- Hardcover
Seller: Mispah books, Redhill, United KingdomMispah books
Contact seller4-star sellerCondition: Used - As new
£ 88.00
£ 25.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Hardcover. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Softcover
Seller: Mispah books, Redhill, United KingdomMispah books
Contact seller4-star sellerCondition: Used - As new
£ 89.00
£ 25.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Paperback. Condition: Like New. Like New. book.
- Hardcover
Seller: Buchpark, Trebbin, GermanyBuchpark
Contact seller5-star sellerCondition: Used - Fine
£ 26.69
£ 90.98 shippingShips from Germany to U.S.A.Quantity: 3 available
Condition: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
- Softcover
- Print on Demand
Seller: Brook Bookstore On Demand, Napoli, ItalyBrook Bookstore On Demand
Contact seller4-star sellerCondition: New
£ 41.25
£ 4.77 shippingShips from Italy to U.S.A.Quantity: Over 20 available
Condition: new. Questo è un articolo print on demand.
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 47.73
£ 19.93 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of Strathclyde. Th…e growing complexity of digital control systems in such areas as robotics, flight control and engine control has created a demand for faster and more reliable systems. This book examines how parallel processing can satisfy these requirements. Following a survey of parallel computer architectures, MIMD (Multiple Instruction Multiple Data) machines are identified as suitable systems for digital control problems, which are characterised by a mixture of regular and irregular algorithmic tasks. An example of a typical MIMD architecture, suitable for real-time control, (the Inmos Transputer) is introduced together with its associated parallel programming language (Occam). The key problem in implementing parallel software is associated with mapping parallel tasks onto physical processors. In this book a variety of schemes are described and assessed to help illustrate potential areas of difficulty for the real-time control software engineer. Solutions are proposed and tested on a flight control case study example. Recognising the widespread acceptance of MATLAB and its derivatives for computer aided control system design, this book demonstrates how mapping strategies can be realised in this environment and integrated with a transputer development system for on-line performance evaluation. A case study example demonstrates the power of this approach and important issues are highlighted. Readers will experience the advantages of parallel processing in digital control while being made aware of the key factors to be considered in the development of an effective solution. Practising control engineers and graduate/post-graduate students will find the book of particular interest and benefit. 164 pp. Englisch.
- Softcover
- Print on Demand
Seller: Majestic Books, Hounslow, United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 65.67
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 4 available
Condition: New. Print on Demand pp. 166 79 Figures, 67:B&W 6.69 x 9.61 in or 244 x 170 mm (Pinched Crown) Perfect Bound on White w/Gloss Lam.
- Softcover
- Print on Demand
Seller: Biblios, frankfurt am main, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 68.97
£ 8.62 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND pp. 166.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 43.17
£ 42.45 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of…Strathclyde. The growing c.
- Softcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
£ 47.73
£ 51.99 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Parallel Processing in Digital Control is a volume to be published in the new Advances in Industrial Control series, edited by Professor M.J. Grimble and Dr. M.A. Johnson of the Industrial Control Unit, University of Strathclyde. The gr…owing complexity of digital control systems in such areas as robotics, flight control and engine control has created a demand for faster and more reliable systems. This book examines how parallel processing can satisfy these requirements. Following a survey of parallel computer architectures, MIMD (Multiple Instruction Multiple Data) machines are identified as suitable systems for digital control problems, which are characterised by a mixture of regular and irregular algorithmic tasks. An example of a typical MIMD architecture, suitable for real-time control, (the Inmos Transputer) is introduced together with its associated parallel programming language (Occam). The key problem in implementing parallel software is associated with mapping parallel tasks onto physical processors. In this book a variety of schemes are described and assessed to help illustrate potential areas of difficulty for the real-time control software engineer. Solutions are proposed and tested on a flight control case study example. Recognising the widespread acceptance of MATLAB and its derivatives for computer aided control system design, this book demonstrates how mapping strategies can be realised in this environment and integrated with a transputer development system for on-line performance evaluation. A case study example demonstrates the power of this approach and important issues are highlighted. Readers will experience the advantages of parallel processing in digital control while being made aware of the key factors to be considered in the development of an effective solution. Practising control engineers and graduate/post-graduate students will find the book of particular interest and benefit.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 164 pp. Englisch.
