ISBN: 9780751400113 - The Canning of Fish and Meat (6 results)

Hardcover. Condition: Very Good. The Canning of Fish and Meat This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .…

Hardcover. Condition: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Condition: New. In English.

Condition: New.

Buch. Condition: Neu. Neuware - 1 Raw material sourcing.- 1.1 Introduction.- 1.2 Supply of fish.- 1.3 Finding fish.- 1.4 Catching fish.- 1.4.1 Surrounding nets.- 1.4.2 Towed nets.- 1.4.3 Static nets.- 1.4.4 Line and hook.- 1.5 By-catch.- 1.6 On-board handling of fish.- 1.6.1 Size of fish.- 1.6.2 Metabolic rate.- 1.6.3 Catching practice.- 1.6.4 Handling fish.- 1.7 Quality retention.- 1.7.1 Cooling with ice.- 1.7.2 Boxing in ice.- 1.7.3 Ice-chilled sea water (CSW).- 1.7.4 Refrigerated sea water (RSW).- 1.7.5 Freezing.- 1.8 Fishfarming.- 1.9 Conclusions.- References.- 2 Fish raw material.- 2.1 Introduction.- 2.2 Transportation.- 2.2.1 Spoilage factors.- 2.2.2 Protection in transportation.- 2.3 Reception and testing.- 2.4 Storage.- 2.5 Defrosting frozen fish.- 2.5.1 Air thawing.- 2.5.2 Air blast thawing.- 2.5.3 Water thawing.- 2.5.4 Vacuum thawing.- 2.5.5 Other methods of thawing.- 2.6 Fish preparation.- 2.6.1 Heading.- 2.6.2 Filleting.- 2.6.3 Skinning.- 2.6.4 Smoking.- 2.6.5 Pre-cooking.- 2.7 Storing prepared fish.- 2.8 Chemical indicators of quality.- References and Bibliography.- Appendix: Sources of machinery.- 3 Meat raw materials.- 3.1 Introduction.- 3.2 Specifications and quality assurance.- 3.3 Sampling procedures.- 3.4 Identity of meat.- 3.4.1 Species.- 3.4.2 Age and sex.- 3.4.3 Other factors.- 3.4.4 Chemical composition.- 3.5 Manufacturing quality factors.- 3.5.1 Functionality of meat proteins.- 3.5.2 Curing of meat products with nitrite.- 3.5.3 The importance of meat pH.- 3.5.4 pH changes in meat after slaughter.- 3.5.5 Chilling and freezing.- 3.5.6 Transport and delivery.- 3.6 Physical condition of meat.- 3.7 Microbiology of meat raw materials.- 3.7.1 Spoilage bacteria.- 3.7.2 Food-poisoning bacteria.- 3.8 Summary.- References.- 4 Canning factory standards.- 4.1 Introduction.- 4.2 Factory environment.- 4.2.1 Location and surroundings.- 4.2.2 Vehicles and roadways.- 4.3 Factory structure.- 4.3.1 External walls.- 4.3.2 Access ways.- 4.3.3 Pest-proofing.- 4.4 Production area.- 4.4.1 Internal walls.- 4.4.2 Floors.- 4.4.3 Ceilings.- 4.4.4 Lighting.- 4.4.5 Ventilation.- 4.5 Factory layout.- 4.5.1 Separation of processes.- 4.5.2 Separation of personnel.- 4.6 Services.- 4.6.1 General water supply.- 4.6.2 Water for cooling purposes.- 4.6.3 General steam supply.- 4.6.4 Potable steam supply.- 4.6.5 Other services.- 4.6.6 Effluent.- 4.7 Personal hygiene.- 4.7.1 Health control.- 4.7.2 Protective clothing.- 4.7.3 Sanitary accommodation.- 4.7.4 Staff amenities.- 4.8 Equipment.- 4.8.1 Hygienic design.- 4.8.2 Installation.- Further reading.- 5 Cans and lids.- 5.1 Introduction.- 5.2 Metals used in can manufacture.- 5.2.1 Stec.- 5.2.2 Tin-free steels (TFS) and blackplate.- 5.2.3 Aluminium.- 5.2.4 Mechanical properties.- 5.3 Methods of container manufacture.- 5.3.1 Three-piece can manufacture.- 5.3.2 Two-piece can manufacture.- 5.3.3 Can ends.- 5.4 Selection of a can-making route.- 5.4.1 Product(s) to be packed.- 5.4.2 Size of the market and the manufacturing unit.- 5.5 Mechanical properties of containers and ends.- 5.5.1 General.- 5.5.2 Axial strength.- 5.5.3 Panelling resistance.- 5.5.4 Peaking resistance.- 5.5.5 Measurement of mechanical properties.- 5.5.6 Secondary processes.- 5.6 Coatings.- 5.6.1 General classification.- 5.6.2 Protective internal coatings.- 5.7 Functions of can lacquers/enamels.- 5.7.1 Internal corrosion protection.- 5.7.2 Protection of the product.- 5.7.3 Facilitating manufacture.- 5.7.4 Base for dccoration.- 5.7.5 External corrosion and abrasion resistance.- 5.8 Methods of lacquer application.- 5.8.1 Roller coating in sheet form.- 5.8.2 Coil coating.- 5.8.3 Spraying.- 5.8.4 Electrocoating.- 5.9 Container corrosion; theory and practice.- 5.9.1 External corrosion.- 5.9.2 Internal corrosion.- 5.9.3 Theory 130 5.9.10 Recycling.- 5.10.1 Technical factors.- 5.10.2 Economics.- 6 Filling operations.- 6.1 Introduction.- 6.2 Hand filling.- 6.2.1 Meat products.- 6.2.2 Fish products.- 6.3 Mechanical filling - general considerations.- 6.4 Meat filling.- 6.…

Hardback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.