Whelan a Goff (26 results)

paperback. Condition: Very Good. Injection Moulding of Engineering Thermoplastics (VNR Pocket Guides to Plastics) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .

Paperback. Condition: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Condition: Very Good. 268 pp., paperback, very good. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Condition: Good. 1st Edition. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

paperback. Condition: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Condition: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Shows some signs of wear but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Condition: New.

Condition: New. In.

Condition: New. This book provides a wealth of rapidly accessible information on the injection molding process for, as well as the characteristics of, thermoplastic materials. Series: VNR Pocket Guides to Plastics. Num Pages: 189 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 203 x 127 x 10. Weight in Grams: 214. . 1991. Paperback. . . . .

Condition: New.

Condition: New. Series: VNR Pocket Guides to Plastics Series. Num Pages: 167 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 203 x 127 x 9. Weight in Grams: 850. . 1990. Softcover reprint of the original 1st ed. 1990. Paperback. . . . .

Paperback. Condition: Brand New. 1st edition. 110 pages. 7.75x4.50x0.50 inches. In Stock.

Paperback. Condition: Brand New. 328 pages. 8.35x5.43x0.71 inches. In Stock.

Paperback. Condition: Brand New. 167 pages. 8.00x4.75x0.50 inches. In Stock.

Condition: New. This book provides a wealth of rapidly accessible information on the injection molding process for, as well as the characteristics of, thermoplastic materials. Series: VNR Pocket Guides to Plastics. Num Pages: 189 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 203 x 127 x 10. Weight in Grams: 214. . 1991. Paperback. . . . . Books ship from the US and Ireland.

Condition: New. Series: VNR Pocket Guides to Plastics Series. Num Pages: 167 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 203 x 127 x 9. Weight in Grams: 850. . 1990. Softcover reprint of the original 1st ed. 1990. Paperback. . . . . Books ship from the US and Ireland.

Condition: Good. 324 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task.

Soft cover. Condition: Very Good. paperback. 126 pages. Size: 8vo - over 7¾ - 9¾" tall. Book.

Hardcover. Condition: Very Good. No Jacket. no dustjacket. 1989 4th edition. 159 pages. Size: 8vo - over 7¾ - 9¾" tall. Book.

Condition: new. Questo è un articolo print on demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task. 328 pp. Englisch.

Condition: New. Print on Demand.

Condition: New. PRINT ON DEMAND.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 328 pp. Englisch.