Pani Sesadeba (72 results)
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 54.52
£ 2.95 shippingShips within U.S.A.Quantity: 4 available
Condition: New.
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 54.73
£ 2.95 shippingShips within U.S.A.Quantity: 4 available
Condition: New.
- Softcover
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 28.82
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 30.41
£ 59.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Electro-deposition of Ni/Ni-Al composite on Cu substrate | Mechanical properties of electro-deposited Cu substrate using pure Ni/Ni-Al composite coating | Sesadeba Pani (u. a.) | Taschenbuch | 64 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202511940 | Verantwortliche Person für d…ie EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 31.99
£ 59.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Instability analysis of antifriction bearings using wear particle | Centralised lubrication system | Sesadeba Pani (u. a.) | Taschenbuch | 80 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202515238 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19,…49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 31.99
£ 59.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Tribology Characteristics of Austenitic Steel | Experimental Investigation | Sesadeba Pani (u. a.) | Taschenbuch | 56 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202515146 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at…]preigu[dot]de | Anbieter: preigu.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 31.99
£ 59.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Dynamic Vibration Absorber And Optimization Technique | Effective Use of Dynamic Vibration Absorber and Optimization Technique using FEM to Reduce Amplitude Of Vibration | Sesadeba Pani (u. a.) | Taschenbuch | 60 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202519656 | Verantwortl…iche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 42.16
£ 59.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. CFD Analysis of Flow Pattern in ECM | CFD Analysis Of Flow Pattern In Electro Chemical Machining For Different Shape Of Tools | Sesadeba Pani (u. a.) | Taschenbuch | 116 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202554558 | Verantwortliche Person für die EU: preigu GmbH & Co. K…G, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Softcover
Seller: Mispah books, Redhill, SURRE, United KingdomMispah books
Contact seller4-star sellerCondition: New
£ 118.00
£ 25.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Softcover
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 28.82
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New.
- Softcover
Seller: Mispah books, Redhill, SURRE, United KingdomMispah books
Contact seller4-star sellerCondition: New
£ 140.00
£ 25.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Softcover
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 28.82
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New.
- Softcover
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 28.82
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New.
- Softcover
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 28.82
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 33.35
£ 59.81 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. CFD-ANALYSE DES STRÖMUNGSMUSTERS IN ECM | CFD-Analyse von Strömungsmustern bei der elektrochemischen Bearbeitung für verschiedene Werkzeugformen | Sesadeba Pani (u. a.) | Taschenbuch | 108 S. | Deutsch | 2020 | Verlag Unser Wissen | EAN 9786200977663 | Verantwortliche Person für die EU: preigu GmbH &… Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
Language: English
Published by LAP LAMBERT Academic Publishing Apr 2020, 2020
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 35.11
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The content of this book is to look about different types of vibration ansorber to reduce the amplitude of vibration of all types of supported beam. The best optimization technique is co-related and adopted here using FEA technique.… Chapter 1: Discussed introductory part and literature survey which are used still now. chapter 2:Discussed aim and scope of this work. Chapter 3: discussed about theoretically analysis of un-damped/un-damped Parallel dual mass/ J.P. Den Hartog's damped dynamic vibration absorbers. etc. Along with look after tuned vibration absorbers and different possible types of model optimum parameters. Chapter 4: Presents give brief about design of dual mass vibration absorber. Chapter 5: discussed optimization of all possible models/dynamic vibration absorber using FEA technique. Chapter 6:Gives conclusion and scope of future work. Chapter 7: possible references. 60 pp. Englisch.
Language: English
Published by LAP LAMBERT Academic Publishing Mrz 2020, 2020
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 35.11
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Most maintenance practitioners have become familiar with machine condition monitoring through the use of portable systems such as vibration, oil analysis, thermography. These portable systems are typically utilized as part of predic…tive maintenance program that is expensive and time consuming. With recent advances in the field of lubricant condition monitoring utilize the concept of real time condition monitoring with the help of expert systems that is highlighted through a case study. The present work describes the development of an expert system that can be used to determine the condition of lubricating oil in circulation in a centralized lubrication system attributed for lubricating antifriction bearings. It begins with basic concepts of oil analysis, lubrication, with analysis of bearings and finally the development of an expert system pertinent to wear paricle analysis.The lubricant contaminant monitoring through advanced diagnostic techniques for critical equipment is a very powerful maintenance tool in any production plant. It predicts the condition of the oil as well as the machine in advance failure mode. 80 pp. Englisch.
Language: English
Published by LAP LAMBERT Academic Publishing Mrz 2020, 2020
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 35.11
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Coefficient of friction and wear rate of different austenitic steel materials are investigated and compared. Experiments are conducted on a pin/ball-on-disk apparatus on different types of ball materials such as austenitic stainless… steel SS304 and austenitic stainless steel SS316 sliding against EN-31 disk. The experiments are performed on a group of specimens for duration of 5 min for various loads of 10,15 and 20 N in magnitude with sliding velocity of 1,1.5,2 m/s. The results show that the frictional force varies with duration of rubbing, normal load and sliding velocity. In general, frictional force increases for a certain duration of rubbing and after that it remains constant for the rest of the experimental time. The results obtained reveal that the frictional force increases with the increase in normal load for all the tested materials. It is also found that frictional force increases with the increase in sliding velocity for all the materials investigated. For the same operating condition, the magnitudes of the frictional force and wear rate are different for different materials depending on normal load and sliding velocity. 56 pp. Englisch.
Language: English
Published by LAP LAMBERT Academic Publishing Mrz 2020, 2020
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 35.11
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The content of the book is as follows: Coating and Different Types of Deposition/Coating Techniques. Compressed summary about the electrodeposition process with advantages, disadvantages and their applications over other coating met…hods with diagram. Also provide a short explanation on pulsed electrodeposition, electrocodeposition, different baths used for nickel electroplating. Brief literature reviews on pure Ni and Ni-Al composite coatings were arranged in chapter 2. A detailed experimental investigation and about different characterization methods were provided in chapter 3. In chapter 4 a discussion about the results obtained from the experiment. In chapter 5 conclusions of the present work were reported and provided with future work. References were provided in the last chapter. 64 pp. Englisch.
- Softcover
- Print on Demand
Seller: Majestic Books, Hounslow, United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 53.76
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 4 available
Condition: New. Print on Demand.
- Softcover
- Print on Demand
Seller: Majestic Books, Hounslow, United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 53.94
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 4 available
Condition: New. Print on Demand.
Language: Spanish
Published by Ediciones Nuestro Conocimiento Jul 2020, 2020
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 33.35
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -El mecanizado electroquímico es un proceso de mecanizado no convencional trabajado con un principio de la ley de Faraday. Debido al diseño inadecuado de las herramientas de formas complicadas, hay posibilidades de pasivación y ebull…ición del electrolito en el proceso de ECM que causa un mal mecanizado. Predecir el patrón de flujo también es importante para prevenir la tendencia a la ebullición del electrolito se debe al sobrecalentamiento del electrolito. Este trabajo del proyecto es para optimizar el diseño de la herramienta en forma de L y para estudiar el patrón de flujo, la distribución de la densidad de corriente, el perfil de velocidad, el patrón de temperatura, la turbulencia y el cambio de forma final de la superficie de la pieza de trabajo. Se evalúan cuatro modelos con diferentes ranuras de forma para el suministro de electrolito. Se utilizó el software ANSYS-CFX para simular este problema de CFD. El modelo geométrico consiste en una pieza de trabajo circular hecha con hierro, 20% de solución salina como electrolito y una herramienta de cobre en forma de L con diferentes tipos de ranuras. Este problema se considera como un problema de estado estable con el modelo de turbulencia. Se aplica una diferencia de potencial de 10V entre el IEG. Los modelos se simularon para varias velocidades de entrada y los principales hallazgos se indican a continuación. 108 pp. Spanisch.
- Softcover
- Print on Demand
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 57.14
£ 8.50 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND.
- Softcover
- Print on Demand
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 57.30
£ 8.50 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND.
Language: English
Published by LAP LAMBERT Academic Publishing Mai 2020, 2020
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 48.32
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Electrochemical machining is a non-conventional machining process worked with a principle of Faraday's law. Due to improper tool design of complicated shapes, there are chances of passivation and boiling of electrolyte in ECM proces…s that causes poor machining. Predicting the flow pattern is also important to prevent boiling tendency of electrolyte is due to overheating of electrolyte. This project work is for optimizing the design of L-shaped tool and to study the flow pattern, current density distribution, velocity profile, temperature pattern, turbulence and final shape change of workpiece top surface. Four models with different shaped grooves for supplying electrolyte are evaluated.ANSYS-CFX software was used for simulating this CFD problem. Geometrical model consists of a circular workpiece made with Iron, 20% brine solution as electrolyte and L- shaped copper tool with different kind of grooves. This problem is considered as a steady- state problem with turbulence model. A potential difference of 10V is applied in between the IEG. The models were simulated for various inlet velocities and the major findings are stated below. 116 pp. Englisch.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 30.14
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Pani SesadebaProf. Sesadeba Pani is working as Assistant Professor in Dept. of Mechanical at IGIT Sarang.The content of this book is to look about different types of vibration ansorber to reduce the amp…litude of vibration of all .
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 30.14
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Pani SesadebaProf. S. Pani is currently working as Assistant Professor in Dept. of Mechanical Engineering at Indira Gandhi Institute of Technology, Sarang, India. He has completed his master degree in I…IT-Kharagpur in 2015.Most m.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 30.14
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Pani SesadebaMr. Sesadeba Pani is currently working as Assistant Professor in IndiraGandhi Institute of Technology, Sarang.The content of the book is as follows: Coating and Different Types of Depositio…n/Coating Techniques. Compr.
- Softcover
- Print on Demand
Seller: moluna, Greven, Germanymoluna
Contact seller5-star sellerCondition: New
£ 30.14
£ 41.86 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Pani SesadebaProf. Sesadeba Pani is working as Assistant Professor in Dept. of Mechanical at IGIT Sarang.Coefficient of friction and wear rate of different austenitic steel materials are investigated an…d compared. Experiments are.
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 33.35
£ 19.65 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -L'usinage électrochimique est un procédé d'usinage non conventionnel qui fonctionne selon un principe de la loi de Faraday. En raison d'une mauvaise conception des outils de formes complexes, il y a des risques de passivation et d'é…bullition de l'électrolyte dans le processus ECM, ce qui entraîne un mauvais usinage. Il est également important de prévoir le schéma d'écoulement pour éviter que la tendance à l'ébullition de l'électrolyte ne soit due à une surchauffe de l'électrolyte. Ce projet vise à optimiser la conception de l'outil en forme de L et à étudier le schéma d'écoulement, la distribution de la densité de courant, le profil de vitesse, le schéma de température, la turbulence et le changement de forme final de la surface supérieure de la pièce. Le logiciel ANSYS-CFX a été utilisé pour simuler ce problème de CFD. Le modèle géométrique consiste en une pièce circulaire faite de fer, d'une solution de saumure à 20% comme électrolyte et d'un outil en cuivre en forme de L avec différents types de rainures. Ce problème est considéré comme un problème en régime permanent avec modèle de turbulence. Une différence de potentiel de 10V est appliquée entre l'IEG. Les modèles ont été simulés pour différentes vitesses d'entrée et les principales conclusions sont présentées ci-dessous. 108 pp. Französisch.
