Marc Van Dyck (26 results)
More imagesLanguage: English
Published by Sr. Nattier, Paris, original publication 1710 1800
Seller: The Bookmonger, Nottingham, , United KingdomThe Bookmonger
Contact seller5-star sellerCondition: Used - Very good
£ 28.00
£ 14.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
No Binding. Condition: Very Good. Size: Print image 333 x 435 mm, full sheet 45 x 59.5 cm. Condition: Very good condition, laid to card, some old tears to margins only and slight water stain bottom right. This print is from a copper engraving made in 1710 by Jean Audran from a drawing by Jean Marc Nattier, which was itself based… upon a portrait of Rubens painted by Anthony van Dyck. The print was published as a plate in La Galerie du Palais du Luxembourg, peinte part Rubens, dessinée par le Sr. Nattier, Paris. 1710. Van Dyck (1599-1641) joined the Antwerp studio of the renowned painter Rubens when he was just 19, but already a Master of the Antwerp Guild. I have not discovered when this portrait was made, to what extent Nattier embellished it, or whether it still exists. I am also not sure what the date of this particular impression is but it is certainly antique, unlikely to be later than c1800.
Language: English
Published by Springer 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 50.80
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
Language: English
Published by Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 50.80
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
Language: English
Published by Springer 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 66.65
£ 2.97 shippingShips within U.S.A.Quantity: 4 available
Condition: New.
Language: English
Published by Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 67.53
£ 2.97 shippingShips within U.S.A.Quantity: 4 available
Condition: New. pp. 172.
- Softcover
Seller: Revaluation Books, Exeter, , United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 27.82
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Paperback. Condition: Brand New. 140 pages. German language. 9.45x6.69x0.32 inches. In Stock.
Language: English
Published by Springer Nature 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
Seller: Revaluation Books, Exeter, , United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 64.52
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 172 pages. 9.25x6.10x0.37 inches. In Stock.
Language: English
Published by Springer International Publishing, Springer International Publishing 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 47.54
£ 52.95 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries between physical,… digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field. To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective.
Language: English
Published by Springer International Publishing 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 47.54
£ 53.63 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries between physical, digita…l, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field. To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective.
More imagesLanguage: English
Published by Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 44.75
£ 60.40 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Forecasting Next Generation Manufacturing | Digital Shadows, Human-Machine Collaboration, and Data-driven Business Models | Frank T. Piller (u. a.) | Taschenbuch | Contributions to Management Science | xiv | Englisch | 2023 | Springer | EAN 9783031077364 | Verantwortliche Person für die EU: Springer…Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Language: English
Published by Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
Seller: Buchpark, Trebbin, , GermanyBuchpark
Contact seller5-star sellerCondition: Used
£ 35.90
£ 90.60 shippingShips from Germany to U.S.A.Quantity: 2 available
Condition: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries between p…hysical, digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field. To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective.
- Softcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 13.25
£ 53.03 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Band 15 der TOGI-Schriftenreihe setzt sich mit den Entwicklungsperspektiven für die Digitale Agenda der Deutschen Bundesregierung bis zur Bundestagswahl im Jahr 2017 und in der darauf folgenden Legislaturperiode 2017-21 auseinander. Ausgehend von d…er bisher erreichten Zielen der 2015 präsentierten Digitalen Agenda stellt sich Marc Van Dyck auf Basis von Experteninterviews den Fragen, ob die Erwartungen bisher erfüllt wurden, welche Schwerpunkte es zu stärken gilt und welche neuen Akzente gesetzt werden sollten.Die Digitalisierung verändert Infrastrukturen, Wirtschaft, Staat, Gesellschaft, Bildung, Forschung, Wissenschaft, Kultur und Medien nachhaltig. Die Bundesregierung möchte dieser Entwicklung nicht nur zusehen, sondern die Digitalisierung selbst aktiv gestalten. Die Bundeskanzlerin sieht dies sogar als eine der wichtigsten der derzeitigen Aufgaben an. Die Digitale Agenda für Deutschland (2014-2017) greift diesen Kerngedanken für die künftige Digitalpolitik des Bundes auf.18 Monate nach Vorstellung und Verabschiedung der Digitalen Agenda für Deutschland soll aus wissenschaftlicher Perspektive hinterfragt werden, was aus den Vorgaben geworden ist und wie es mit der Digitalisierungspolitik weiter geht. Konnte die digitale Infrastruktur den Erwartungen entsprechend ausgebaut werden Verändern sich bereits Wirtschaft und Arbeit durch Digitalisierung und Industrie 4.0 Werden die an einen innovativen Staat zu setzenden Erwartungen auch erfüllt Darf die Zivilgesellschaft digital mitgestalten Was hat sich für Bildung, Forschung, Wissenschaft, Kultur und Medien bereits verändert Konnten Sicherheit, Schutz und Vertrauen gestärkt werden Wurden internationale Impulse gesetzt Oder wäre Kritik an der Umsetzung angebracht Welche Schwerpunkte gilt es zu stärken Wo müssen neue Akzente gesetzt werden, wenn es mit der Digitalen Agenda für Deutschland nach der Bundestagswahl 2017 weitergeht.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 13.25
£ 60.40 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Entwicklungsperspektive für die Digitale Agenda (Schriftenreihe des The Open Government Institute TOGI der Zeppelin Universität Friedrichshafen, 15) | Ergebnisse einer Expertenbefragung zur Halbzeit der 18. Legislaturperiode des Deutschen Bundestags. Masterarbeit | Marc Van Dyck | Taschenbuch | 140 S…. | Deutsch | 2016 | epubli | EAN 9783741835070 | Verantwortliche Person für die EU: Neopubli GmbH, Sebastian Stude, Köpenicker Str. 154a, 10997 Berlin, produktsicherheit[at]epubli[dot]com | Anbieter: preigu.
More imagesHistoire De Gustave-Adolphe, Roi De Suede ; Composée sur tout ce qui a paru de plus curieux, & sur un grand nombre de Manuscrits, & principalement sur ceux de Mr. Arkenholtz, par M.D.M. *** Professeur, Etc.
Mauvillon, Eléazar de (1712-1779); Johann Arckenholtz; Zacharias Chatelain; Marc-Michel Rey; Paulus Pontius; Anton Van Dyck; Leendert Schenk; Arkstee et Merkus
Published by Chatelain Amsterdam Arkstée Et Merkus Amsterdam Rey, Amsterdam 1764
- Hardcover
- First Edition
Seller: Black's Fine Books & Manuscripts, Toronto, ON, CanadaBlack's Fine Books & Manuscripts
Contact seller5-star sellerCondition: Used
£ 264.91
£ 11.92 shippingShips from Canada to U.S.A.Quantity: 1 available
Leather Bound. First Edition. pp. x, 602. 4to., measuring 9.5" x 8". Period mottled calf over boards, gilt rules and lettering to the spine over maroon spine label, five rasied bands, six compartments; marbled endpapers and edges. Title printed in red-and-black. Lacking the engraved frontispiece portrait of Gustave-Adolphe; eigh…t gorgeous engraved plates comprising of five fold-out engraved maps, two fold-out battle plans, and one fold-out table (diagram), all collated and accounted for. Charming engraved rules, and head-pieces throughout. Light scuffing to the leather extremities (the leather binding has recently been professionally replenished and treated with a natural leather preserver). Leaves uniformly without blemish, and free of any markings, one 6" very neat closed tear to the left margin of plate No. 2 (p. 272) (no loss), otherwise, the remainder of the plates are without blemish, tears, or deficiencies. Overall, very good. Text in French. See, Warmholtz Citation #3810. Corresponds to OCLC #493733549.
Language: English
Published by Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
- Print on Demand
Seller: Brook Bookstore On Demand, Napoli, NA, ItalyBrook Bookstore On Demand
Contact seller3-star sellerCondition: New
£ 41.08
£ 4.75 shippingShips from Italy to U.S.A.Quantity: Over 20 available
Condition: new. Questo è un articolo print on demand.
Language: English
Published by Springer 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
- Print on Demand
Seller: Brook Bookstore On Demand, Napoli, NA, ItalyBrook Bookstore On Demand
Contact seller3-star sellerCondition: New
£ 41.08
£ 4.75 shippingShips from Italy to U.S.A.Quantity: Over 20 available
Condition: new. Questo è un articolo print on demand.
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 13.25
£ 19.85 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Band 15 der TOGI-Schriftenreihe setzt sich mit den Entwicklungsperspektiven für die Digitale Agenda der Deutschen Bundesregierung bis zur Bundestagswahl im Jahr 2017 und in der darauf folgenden Legislaturperiode 2017-21 auseinander.… Ausgehend von der bisher erreichten Zielen der 2015 präsentierten Digitalen Agenda stellt sich Marc Van Dyck auf Basis von Experteninterviews den Fragen, ob die Erwartungen bisher erfüllt wurden, welche Schwerpunkte es zu stärken gilt und welche neuen Akzente gesetzt werden sollten.Die Digitalisierung verändert Infrastrukturen, Wirtschaft, Staat, Gesellschaft, Bildung, Forschung, Wissenschaft, Kultur und Medien nachhaltig. Die Bundesregierung möchte dieser Entwicklung nicht nur zusehen, sondern die Digitalisierung selbst aktiv gestalten. Die Bundeskanzlerin sieht dies sogar als eine der wichtigsten der derzeitigen Aufgaben an. Die Digitale Agenda für Deutschland (2014-2017) greift diesen Kerngedanken für die künftige Digitalpolitik des Bundes auf.18 Monate nach Vorstellung und Verabschiedung der Digitalen Agenda für Deutschland soll aus wissenschaftlicher Perspektive hinterfragt werden, was aus den Vorgaben geworden ist und wie es mit der Digitalisierungspolitik weiter geht. Konnte die digitale Infrastruktur den Erwartungen entsprechend ausgebaut werden Verändern sich bereits Wirtschaft und Arbeit durch Digitalisierung und Industrie 4.0 Werden die an einen innovativen Staat zu setzenden Erwartungen auch erfüllt Darf die Zivilgesellschaft digital mitgestalten Was hat sich für Bildung, Forschung, Wissenschaft, Kultur und Medien bereits verändert Konnten Sicherheit, Schutz und Vertrauen gestärkt werden Wurden internationale Impulse gesetzt Oder wäre Kritik an der Umsetzung angebracht Welche Schwerpunkte gilt es zu stärken Wo müssen neue Akzente gesetzt werden, wenn es mit der Digitalen Agenda für Deutschland nach der Bundestagswahl 2017 weitergeht 140 pp. Deutsch.
Language: English
Published by Springer International Publishing Sep 2023 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 47.54
£ 19.85 shippingShips from Germany to U.S.A.Quantity: 2 available
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries b…etween physical, digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field. To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective. 172 pp. Englisch.
Language: English
Published by Springer International Publishing Aug 2022 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 47.54
£ 19.85 shippingShips from Germany to U.S.A.Quantity: 2 available
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries between…physical, digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field. To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective. 172 pp. Englisch.
Language: English
Published by Springer 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
- Print on Demand
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 65.90
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 4 available
Condition: New. Print on Demand.
Language: English
Published by Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
- Print on Demand
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 64.78
£ 8.59 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND pp. 172.
Language: English
Published by Springer 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
- Print on Demand
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 68.50
£ 8.59 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND.
Language: English
Published by Springer, Berlin|Springer International Publishing|Springer 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
- Print on Demand
Seller: moluna, Greven, , Germanymoluna
Contact seller5-star sellerCondition: New
£ 41.98
£ 42.27 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurri…ng boundaries between physical, digit.
Language: English
Published by Springer, Berlin|Springer International Publishing|Springer 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
- Print on Demand
Seller: moluna, Greven, , Germanymoluna
Contact seller5-star sellerCondition: New
£ 43.32
£ 42.27 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurri…ng boundaries between physical, digit.
Language: English
Published by Springer, Springer Aug 2023 2023
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Softcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
£ 47.54
£ 51.77 shippingShips from Germany to U.S.A.Quantity: 1 available
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries betwe…en physical, digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field.To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 172 pp. Englisch.
Language: English
Published by Springer, Springer Aug 2022 2022
Series: Contributions to Management Science, Book 204 of 214. Book 204 of 214 - Contributions to Management Science
- Hardcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
£ 47.54
£ 51.77 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries between phys…ical, digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field.To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 172 pp. Englisch.
