Gramazio Fabio (19 results)

Condition: good. Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present.

Softcover. Condition: Sehr gut. 1. Auflage. Z : 152 pages, 91 color, 50 duotone, and 40 b/w illustrations - Konrad Wachsmann: a legendary pioneer of prefabricated building systems and a visionary of automatized on-site assembly.

4°. 315 S. zahlr. Ill. OPp.

Taschenbuch. Condition: Neu. Neuware - Following the inaugural FABRICATE Conference 2011 in London, the most important forum for international discussion on digital fabrication in architecture has resumed by Fabio Gramazio and Matthias Kohler at ETH Zurich. In contrast to the projects presented in 2011 at the Bartlett School of Architecture, which were balanced between practice and research, the questions about design and materialisation in architecture, construction, engineering, manufacturing, material and softwaredesign currently seem to be driven more by research institutions and young start-up entrepreneurs than by architectural practice. While digital fabrication technologies are becoming common practice in architecture for prototyping as well as in the realisation of buildings, contemporary research does not just investigate their further development, but presents ways to integrate them already in an early design phase - to definitely overcome the still prevalent separation of design and making. In der Publikation werden aktuelle Arbeiten und herausragende Projekte im Bereich der digitalen Fabrikation vorgestellt und durch Gespräche unter Wissenschaftlern aus Forschung und Praxis ergänzt. Das Buch begleitet die FABRICATE Konferenz, die im Februar 2014 an der ETH in Zürich durchgeführt wird.; In der Publikation werden aktuelle Arbeiten und herausragende Projekte im Bereich der digitalen Fabrikation vorgestellt und durch Gespräche unter Wissenschaftlern aus Forschung und Praxis ergänzt. Das Buch begleitet die FABRICATE Konferenz, die im Februar 2014 an der ETH in Zürich durchgeführt wird.…

Kartoniert / Broschiert. Condition: New. Fabricate 2014Interbational Conference14. 15. Februar 2014www.fabricate2014.orgIn der Publikation werden aktuelle Arbeiten und herausragende Projekte im Bereich der digitalen Fabrikation vorgestellt und durch Gespraeche unter Wissenscha.

8°, 166 S., zahlr., tlw. farb. Abb., Pläne, Brosch., Tadellos. EA. (= Collection Frac Center). Text frz./engl. - «Flight Assembled Architecture is the first architectural installation assembled by flying robots, free from the touch of human hands. The installation is an expression of a rigorous architectural design by Gramazio & Kohler and a visionary robotic system by Raffaello D?Andrea. Flight Assembled Architecture consists of over 1.500 modules which are placed by a multitude of quadrotor helicopters, collaborating according to mathematical algorithms that translate digital design data to the behavior of the flying machines. In this way, the flying vehicles, together, extend themselves as ?living? architectural machines and complete the composition from their dynamic formation of movement and building performance. Within the build, an architectural vision of a 600m high ?vertical village? for 30?000 inhabitants unfolds as model in 1:100 scale. This newly founded village is located in the rural area of Meuse, taking advantage of an existing TGV connection that brings its inhabitants to Paris in less than one hour. It is from this quest of an ?ideal? self-sustaining habitat that the authors pursue a radical new way of thinking and materializing verticality in architecture, Flight Assembled Architecture.» 600 gr. Schlagworte: Architektur - ArchitektInnen.…

Buch. Condition: Neu. Fabricate | Negotiating Design and Making | Fabio Gramazio | Buch | 316 S. | Englisch | 2014 | gta Verlag | EAN 9783856763312 | Verantwortliche Person für die EU: GVA Gemeinsame Verlagsauslieferung Göttingen GmbH & Co. KG, Carsten Schlieker, Postfach 20 21, 37010 Göttingen, info[at]gva-verlage[dot]de | Anbieter: preigu. …

HYX, 2013, 166 pp., illustrations, bilingue anglais / français, broché, très bon état.

Condition: Very Good.

Hardcover. Condition: Near Fine. First Edition. No markings.

gr.8°, 488 S. mit zahlreichen Farbabbildungen, Text: englisch, illustr. original Pappband (Hardcover), Farbvorsätze (schwarz), Einband stellenweise ausgebleicht, sonst ein sehr schönes, sauberes Exemplar ohne Anstreichungen, ohne Vorbesitzvermerke, ohne Eckknicke etc. Abholung im Ladengeschäft in Frankfurt am Main (Nordend ggü. Musterschule) möglich. Das spart die Portokosten. Pickup at the store in Frankfurt am Main (Nordend, close to Musterschule) is possible. It saves the shipping costs.…

Hardcover. Condition: New.

Condition: New.

fester Einband. 408 S. zahlr. Fotos, Abb. Gr 8° Kart. *neuwertig* The Advances in Architectural Geometry (AAG) symposia serve as a unique forum where developments in the design, analysis and fabrication of building geometry are presented. With participation of both academics and professionals, each symposium aims to gather and present practical work and theoretical research that responds to contemporary design challenges and expands the opportunities for architectural form. The fifth edition of the AAG symposia was hosted by the National Centre for Competence in Research Digital Fabrication at ETH Zurich, Switzerland, in September 2016. This book contains the proceedings from the AAG2016 conference and offers detailed insight into current and novel geometrical developments in architecture. The 22 diverse, peer-reviewed papers present cutting-edge innovations in the fields of mathematics, computer graphics, software design, structural engineering, and the design and construction of architecture. Sprache: Englisch.…

Condition: Used: Like New. Cartonné, comme neuf.

Condition: As New. Unread book in perfect condition.

Gr.8°, 405 S., farb. Abb., Diagramme, Kart., Tadellos. EA. - «Developable Surfaces, Polyhedral Surface, Timber Plate Shells, 3D-Scanning, Digital Fabrication, Membrane, Meshing, Computational Design, FreeformThe Advances in Architectural Geometry (AAG) symposia serve as a unique forum where developments in the design, analysis and fabrication of building geometry are presented. With participation of both academics and professionals, each symposium aims to gather and present practical work and theoretical research that responds to contemporary design challenges and expands the opportunities for architectural form. The fifth edition of the AAG symposia was hosted by the National Centre for Competence in Research Digital Fabrication at ETH Zurich, Switzerland, in September 2016. This book contains the proceedings from the AAG2016 conference and offers detailed insight into current and novel geometrical developments in architecture. The 22 diverse, peer-reviewed papers present cutting-edge innovations in the fields of mathematics, computer graphics, software design, structural engineering, and the design and construction of architecture.» 1200 gr. Schlagworte: Mathematik , Architektur - AllgemeinNaturwissenschaft.…

Quer-8°, 315 S., zahlr. teilw. farb Abb., Kart., Min angeschmutzt, innen tadell. - In der Publikation werden aktuelle Arbeiten und herausragende Projekte im Bereich der digitalen Fabrikation vorgestellt und durch Gespräche unter Wissenschaftlern aus Forschung und Praxis ergänzt. Das Buch begleitet die FABRICATE Konferenz, die im Februar 2014 an der ETH in Zürich durchgeführt wird. Following the inaugural FABRICATE Conference 2011 in London, the most important forum for international discussion on digital fabrication in architecture has resumed by Fabio Gramazio and Matthias Kohler at ETH Zurich. In contrast to the projects presented in 2011 at the Bartlett School of Architecture, which were balanced between practice and research, the questions about design and materialisation in architecture, construction, engineering, manufacturing, material and softwaredesign currently seem to be driven more by research institutions and young start-up entrepreneurs than by architectural practice. While digital fabrication technologies are becoming common practice in architecture for prototyping as well as in the realisation of buildings, contemporary research does not just investigate their further development, but presents ways to integrate them already in an early design phase to definitely overcome the still prevalent separation of design and making. 1200 gr. Schlagworte: Architektur - Allgemein.…

Mit Abb. in Farbe. 111 SS. 4to. Orig.-Ln. Neuwertig.