Banday Summera (52 results)

Condition: New.

Condition: New.

Paperback. Condition: Brand New. 60 pages. 8.66x5.87x0.28 inches. In Stock.

Paperback. Condition: Brand New. 72 pages. 8.66x5.91x0.17 inches. In Stock.

Paperback. Condition: Brand New. 8.60x3.40x0.30 inches. In Stock.

Condition: New.

Taschenbuch. Condition: Neu. Micro Hardness Evaluation Of Non-Oxide Ceramic-Ceramic Composites | Summera Banday | Taschenbuch | 72 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9783659967917 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condition: Neu. Experimental Investigation of Solar Thermal Flat Plate Collector | Summera Banday | Taschenbuch | 80 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786139463190 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condition: Neu. Tribological characteristics of self-lubrication composites | Summera Banday | Taschenbuch | 60 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786139460977 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. …

Condition: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | Solar energy has always been an alluring option to meet the hot water demands worldwide. Though there are plenty of advantages associated with the use of solar energy as source to fetch hot water supplies, the intermittent, variable and unpredictable nature of solar energy are major obstacles on the way and makes the use of energy storage system for a solar water heating system (SWHS) indispensable. Thus lots of way have been developed over the past decades to store this energy and efficiently utilize it according to demand throughout the day. Experiment was carried out in two phases, in first phase experiment was conducted in the month of January, during this phase of experimentation the charging of PCM in the early morning hours is excluded from the analysis and main emphasis is imposed on the discharging of PCM at the evening hours. But after receiving some useful suggestions from the members of research and development committee of the institute, the second phase of experimentation was then conducted in the month of May, which includes both the charging and discharging effects of PCM in early morning and evening hours respectively.…

Condition: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | The Present study investigated the wear and friction behavior of tin bronze impregnated with Al2O3, and h-BN/MoS2. The friction and wear properties of the materials were estimated by reciprocating friction monitor under dry conditions at room temperature in air. The mechanical properties of the composites decreased with increasing amount of added h-BN or MoS2. MoS2 was very effective in reducing the wear and friction of the composites. Particularly the 5% vol. MoS2 composite showed a low coefficient of friction than 5% vol. h-BN. By contrast, the wear rate of the MoS2 composites increased considerably with the amount of MoS2 addition. This behavior is thought to be due to the absence of MoS2 and the presence of brittle CuMo2S3 compounds in the sintered composites.…

Condition: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | The Present study investigated the wear and friction behavior of tin bronze impregnated with Al2O3, and h-BN/MoS2. The friction and wear properties of the materials were estimated by reciprocating friction monitor under dry conditions at room temperature in air. The mechanical properties of the composites decreased with increasing amount of added h-BN or MoS2. MoS2 was very effective in reducing the wear and friction of the composites. Particularly the 5% vol. MoS2 composite showed a low coefficient of friction than 5% vol. h-BN. By contrast, the wear rate of the MoS2 composites increased considerably with the amount of MoS2 addition. This behavior is thought to be due to the absence of MoS2 and the presence of brittle CuMo2S3 compounds in the sintered composites.…

Condition: New.

Taschenbuch. Condition: Neu. Évaluation de la microdureté des composites céramique-céramique non oxydés | Summera Banday | Taschenbuch | Französisch | 2023 | Editions Notre Savoir | EAN 9786204508757 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Condition: New.

Condition: New.

Taschenbuch. Condition: Neu. Avaliação da microdureza de compósitos cerâmico-cerâmicos não oxidantes | Summera Banday | Taschenbuch | Portugiesisch | 2022 | Edições Nosso Conhecimento | EAN 9786204508771 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Taschenbuch. Condition: Neu. Valutazione della microdurezza dei compositi ceramici-ceramici non ossidati | Summera Banday | Taschenbuch | Italienisch | 2022 | Edizioni Sapienza | EAN 9786204508764 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Taschenbuch. Condition: Neu. Bewertung der Mikrohärte von Nicht-Oxid-Keramik-Keramik-Verbundwerkstoffen | Summera Banday | Taschenbuch | 68 S. | Deutsch | 2022 | Verlag Unser Wissen | EAN 9786204508733 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The Present study investigated the wear and friction behavior of tin bronze impregnated with Al2O3, and h-BN/MoS2. The friction and wear properties of the materials were estimated by reciprocating friction monitor under dry conditions at room temperature in air. The mechanical properties of the composites decreased with increasing amount of added h-BN or MoS2. MoS2 was very effective in reducing the wear and friction of the composites. Particularly the 5% vol. MoS2 composite showed a low coefficient of friction than 5% vol. h-BN. By contrast, the wear rate of the MoS2 composites increased considerably with the amount of MoS2 addition. This behavior is thought to be due to the absence of MoS2 and the presence of brittle CuMo2S3 compounds in the sintered composites. 60 pp. Englisch.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Micro-hardness and fracture toughness research studies on various non oxide ceramics have been carried out. These ceramics include silicon carbide, silicon nitride and the composites of silicon nitride. Micro-hardness measurement of these ceramics i.e. vicker and knoop was carried out using diamond indenters. Various influences of load and time of indentation on hardness values of these ceramics have been carried out in detail. Fracture toughness of these ceramics was also studied using vicker indentation. The vicker and knoop hardness of these ceramics decreases with increasing load, similar influence was observed by increasing time of indentation. Fracture toughness of Silicon nitride doped with TiN is higher than the other ceramics and silicon carbide doped with boron and carbon has shown higher hardness as compared to other ceramics. 72 pp. Englisch. …

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Solar energy has always been an alluring option to meet the hot water demands worldwide. Though there are plenty of advantages associated with the use of solar energy as source to fetch hot water supplies, the intermittent, variable and unpredictable nature of solar energy are major obstacles on the way and makes the use of energy storage system for a solar water heating system (SWHS) indispensable. Thus lots of way have been developed over the past decades to store this energy and efficiently utilize it according to demand throughout the day. Experiment was carried out in two phases, in first phase experiment was conducted in the month of January, during this phase of experimentation the charging of PCM in the early morning hours is excluded from the analysis and main emphasis is imposed on the discharging of PCM at the evening hours. But after receiving some useful suggestions from the members of research and development committee of the institute, the second phase of experimentation was then conducted in the month of May, which includes both the charging and discharging effects of PCM in early morning and evening hours respectively. 80 pp. Englisch.…

Condition: New. Print on Demand.

Condition: New. Print on Demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Se han realizado estudios de investigación sobre la microdureza y la tenacidad a la fractura de varias cerámicas no oxidadas. Estas cerámicas incluyen el carburo de silicio, el nitruro de silicio y los compuestos de nitruro de silicio. La medición de la microdureza de estas cerámicas, es decir, Vicker y Knoop, se ha llevado a cabo utilizando penetradores de diamante. Se han llevado a cabo varias influencias de la carga y el tiempo de indentación en los valores de dureza de estas cerámicas en detalle. También se ha estudiado la resistencia a la fractura de estas cerámicas utilizando la indentación vicker. La dureza vicker y knoop de estas cerámicas disminuye con el aumento de la carga, y se observó una influencia similar al aumentar el tiempo de indentación. La resistencia a la fractura del nitruro de silicio dopado con TiN es mayor que la de las otras cerámicas y el carburo de silicio dopado con boro y carbono ha mostrado una mayor dureza en comparación con las otras cerámicas. 68 pp. Spanisch.…

Condition: New. PRINT ON DEMAND.

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Micro-hardness and fracture toughness research studies on various non oxide ceramics have been carried out. These ceramics include silicon carbide, silicon nitride and the composites of silicon nitride. Micro-hardness measurement of these ceramics i.e. vicker and knoop was carried out using diamond indenters. Various influences of load and time of indentation on hardness values of these ceramics have been carried out in detail. Fracture toughness of these ceramics was also studied using vicker indentation. The vicker and knoop hardness of these ceramics decreases with increasing load, similar influence was observed by increasing time of indentation. Fracture toughness of Silicon nitride doped with TiN is higher than the other ceramics and silicon carbide doped with boron and carbon has shown higher hardness as compared to other ceramics. …

Condition: New. PRINT ON DEMAND.

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Solar energy has always been an alluring option to meet the hot water demands worldwide. Though there are plenty of advantages associated with the use of solar energy as source to fetch hot water supplies, the intermittent, variable and unpredictable nature of solar energy are major obstacles on the way and makes the use of energy storage system for a solar water heating system (SWHS) indispensable. Thus lots of way have been developed over the past decades to store this energy and efficiently utilize it according to demand throughout the day. Experiment was carried out in two phases, in first phase experiment was conducted in the month of January, during this phase of experimentation the charging of PCM in the early morning hours is excluded from the analysis and main emphasis is imposed on the discharging of PCM at the evening hours. But after receiving some useful suggestions from the members of research and development committee of the institute, the second phase of experimentation was then conducted in the month of May, which includes both the charging and discharging effects of PCM in early morning and evening hours respectively. …

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The Present study investigated the wear and friction behavior of tin bronze impregnated with Al2O3, and h-BN/MoS2. The friction and wear properties of the materials were estimated by reciprocating friction monitor under dry conditions at room temperature in air. The mechanical properties of the composites decreased with increasing amount of added h-BN or MoS2. MoS2 was very effective in reducing the wear and friction of the composites. Particularly the 5% vol. MoS2 composite showed a low coefficient of friction than 5% vol. h-BN. By contrast, the wear rate of the MoS2 composites increased considerably with the amount of MoS2 addition. This behavior is thought to be due to the absence of MoS2 and the presence of brittle CuMo2S3 compounds in the sintered composites.…