Vlsi Design Methodologies Digital (32 results)

Hardcover. Condition: Very Good. No Jacket. Missing dust jacket; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 1.9.

Hardcover. Hardcover; no dustjacket. This is an Ex-Corporate-Library copy, with all the typical markings (from a Cray Research technical library). Fair condition only. A bit of light surface rubbing to the boards. Library labels on the front board and spine tail. The spine background color has sunned to blue; but the lettering appears unaffected. Else binding clean. There are dampstains at the top corners of the endpapers, and the pages are somewhat wavy at the top corner - have been damp at one time. All the text is fully readable, and there is no odor. There is a pocket on the rear pastedown, and Cray inkstamps on the flyleaves; with no additional library markings. A useable working copy of an otherwise pricey volume. ; 29A; 9-1/4" x 6-1/4"; 399 pages.

Condition: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:0792394283.

Condition: New. In.

Condition: New. In.

Condition: New.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: \* Decide on a certain unified framework for all design levels. \* Derive a design method based on this framework. \* Create a design environment to implement this design method.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: \* Decide on a certain unified framework for all design levels. \* Derive a design method based on this framework. \* Create a design environment to implement this design method.

Condition: New.

Paperback. Condition: new. Paperback. Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. * Derive a design method based on this framework. * Create a design environment to implement this design method. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condition: As New. Unread book in perfect condition.

Condition: New. 1994. Hardcover. . . . . .

Condition: New.

Hardcover. Condition: new. Hardcover. This book is centered around a number of emerging issues in the area of VLSI design methodologies, including system integration, optimization, algorithm transformation, impact of applications, memory management and algorithm prototyping. The text aims to provide the reader with the knowledge to participate in the rapidly evolving field of application specific design methodology for DSP architectures. "VLSI Design Methodologies for Digital Signal Processing Architectures" should be a useful reference for researchers in both academia and industry. It may also be used as a text for advanced courses in application specific design, VLSI design methods, and silicon compilers. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condition: New. pp. 420.

Condition: New. pp. 416.

Paperback. Condition: Brand New. 413 pages. 9.25x6.10x0.94 inches. In Stock.

Condition: New. 1994. Hardcover. . . . . . Books ship from the US and Ireland.

Hardcover. Condition: Like New. Like New. book.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: new. Paperback. Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. * Derive a design method based on this framework. * Create a design environment to implement this design method. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Hardcover. Condition: new. Hardcover. This book is centered around a number of emerging issues in the area of VLSI design methodologies, including system integration, optimization, algorithm transformation, impact of applications, memory management and algorithm prototyping. The text aims to provide the reader with the knowledge to participate in the rapidly evolving field of application specific design methodology for DSP architectures. "VLSI Design Methodologies for Digital Signal Processing Architectures" should be a useful reference for researchers in both academia and industry. It may also be used as a text for advanced courses in application specific design, VLSI design methods, and silicon compilers. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of th.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of th.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: \* Decide on a certain unified framework for all design levels. \* Derive a design method based on this framework. \* Create a design environment to implement this design method. 416 pp. Englisch.

Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: \* Decide on a certain unified framework for all design levels. \* Derive a design method based on this framework. \* Create a design environment to implement this design method.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 418 pp. Englisch.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: \* Decide on a certain unified framework for all design levels. \* Derive a design method based on this framework. \* Create a design environment to implement this design method.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 416 pp. Englisch.

Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: \* Decide on a certain unified framework for all design levels. \* Derive a design method based on this framework. \* Create a design environment to implement this design method. 418 pp. Englisch.

Condition: New. Print on Demand pp. 420 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Condition: New. Print on Demand pp. 416 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.