Virtual Remote Control Tower (34 results)

Paperback. Condition: Good. The book has been read but remains in clean condition. All pages are intact and the cover is intact. Some minor wear to the spine.

Condition: New. In.

Condition: New.

Condition: New. In.

Condition: New. In.

Taschenbuch. Condition: Neu. Virtual and Remote Control Tower | Research, Design, Development, Validation, and Implementation | Norbert Fürstenau | Taschenbuch | Research Topics in Aerospace | xxx | Englisch | 2023 | Springer | EAN 9783030936525 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Condition: New. pp. 337.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the interdisciplinary and international 'Virtual and Remote Tower' research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new 'Remote Tower Operation' (RTO) work environment for enhancing work efficiency and safety and reducing cost. The revolutionary human-system interface replaces the out-of-windows view by an augmented vision video panorama that allows for remote aerodrome traffic control without a physical tower building. It enables the establishment of a (multiple) remote control center (MRTO, RTC) that may serve several airports from a central location. The first (2016) edition of this book covered all aspects from preconditions over basic research and prototype development to initial validation experiments with field testing. Co-edited and -authored by DLR RTO-team members Dr. Anne Papenfuss and Jörn Jakobi, this second extended edition with nearly doubled numberof chapters includes further important aspects of the international follow-up work towards the RTO-deployment. Focus of the extension with new contributions from ENRI/Japan and IAA/Dublin with Cranfield University, is on MRTO, workload, implementation, and standardization. Specifically, the two revised and nine new Chapters put the focus on inclusion of augmented vision and virtual reality technologies, human-in-the-loop simulation for quantifying workload and deriving minimum (technical) requirements according to standards of the European Organization for Civil Aviation Equipment (EUROCAE), and MRTO implementation and certification. Basics of optical / video design, workload measures, and advanced psychophysical data analysis are presented in four appendices.

Condition: Hervorragend. Zustand: Hervorragend | Seiten: 644 | Sprache: Englisch | Produktart: Bücher | This book presents the interdisciplinary and international żVirtual and Remote Towerż research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new żRemote Tower Operationż (RTO) work environment for enhancing work efficiency and safety and reducing cost. The revolutionary humanżsystem interface replaces the out-of-windows view by an augmented vision video panorama that allows for remote aerodrome traffic control without a physical tower building. It enables the establishment of a (multiple) remote control center (MRTO, RTC) that may serve several airports from a central location. The first (2016) edition of this book covered all aspects from preconditions over basic research and prototype development to initial validation experiments with field testing. Co-edited and -authored by DLR RTO-team members Dr. Anne Papenfuss and Jörn Jakobi, this second extended edition with nearly doubled numberof chapters includes further important aspects of the international follow-up work towards the RTO-deployment. Focus of the extension with new contributions from ENRI/Japan and IAA/Dublin with Cranfield University, is on MRTO, workload, implementation, and standardization. Specifically, the two revised and nine new Chapters put the focus on inclusion of augmented vision and virtual reality technologies, human-in-the-loop simulation for quantifying workload and deriving minimum (technical) requirements according to standards of the European Organization for Civil Aviation Equipment (EUROCAE), and MRTO implementation and certification. Basics of optical / video design, workload measures, and advanced psychophysical data analysis are presented in four appendices.

Condition: New. 2nd ed. 2022 edition NO-PA16APR2015-KAP.

Condition: New.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The interdisciplinary research and development work carried out in the last ten years which is presented in this book aimed at replacing the conventional airport control tower by a new 'remote tower operation' work environment (RTO) which should enhance work efficiency and safety and reduce costs. This revolutionary human-system interface allows for remote aerodrome traffic control without a physical tower building and enables the establishment of remote airport traffic control centers (RTC) of which each may serve several airports from a central location.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the interdisciplinary and international 'Virtual and Remote Tower' research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new 'Remote Tower Operation' (RTO) work environment for enhancing work efficiency and safety and reducing cost. The revolutionary human-system interface replaces the out-of-windows view by an augmented vision video panorama that allows for remote aerodrome traffic control without a physical tower building. It enables the establishment of a (multiple) remote control center (MRTO, RTC) that may serve several airports from a central location. The first (2016) edition of this book covered all aspects from preconditions over basic research and prototype development to initial validation experiments with field testing. Co-edited and -authored by DLR RTO-team members Dr. Anne Papenfuss and Jörn Jakobi, this second extended edition with nearly doubled numberof chapters includes further important aspects of the international follow-up work towards the RTO-deployment. Focus of the extension with new contributions from ENRI/Japan and IAA/Dublin with Cranfield University, is on MRTO, workload, implementation, and standardization. Specifically, the two revised and nine new Chapters put the focus on inclusion of augmented vision and virtual reality technologies, human-in-the-loop simulation for quantifying workload and deriving minimum (technical) requirements according to standards of the European Organization for Civil Aviation Equipment (EUROCAE), and MRTO implementation and certification. Basics of optical / video design, workload measures, and advanced psychophysical data analysis are presented in four appendices.

Hardcover. Condition: Brand New. 2nd edition. 641 pages. 9.25x6.10x9.21 inches. In Stock.

Condition: New.

Paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: new. Questo è un articolo print on demand.

Condition: new. Questo è un articolo print on demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book presents the interdisciplinary and international 'Virtual and Remote Tower' research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new 'Remote Tower Operation' (RTO) work environment for enhancing work efficiency and safety and reducing cost. The revolutionary human-system interface replaces the out-of-windows view by an augmented vision video panorama that allows for remote aerodrome traffic control without a physical tower building. It enables the establishment of a (multiple) remote control center (MRTO, RTC) that may serve several airports from a central location. The first (2016) edition of this book covered all aspects from preconditions over basic research and prototype development to initial validation experiments with field testing. Co-edited and -authored by DLR RTO-team members Dr. Anne Papenfuss and Jörn Jakobi, this second extended edition with nearly doubled numberof chapters includes further important aspects of the international follow-up work towards the RTO-deployment. Focus of the extension with new contributions from ENRI/Japan and IAA/Dublin with Cranfield University, is on MRTO, workload, implementation, and standardization. Specifically, the two revised and nine new Chapters put the focus on inclusion of augmented vision and virtual reality technologies, human-in-the-loop simulation for quantifying workload and deriving minimum (technical) requirements according to standards of the European Organization for Civil Aviation Equipment (EUROCAE), and MRTO implementation and certification. Basics of optical / video design, workload measures, and advanced psychophysical data analysis are presented in four appendices. 644 pp. Englisch.

Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This book presents the interdisciplinary and international Virtual and Remote Tower research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new Remote Tower.

Condition: new. Questo è un articolo print on demand.

Condition: New. Print on Demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The interdisciplinary research and development work carried out in the last ten years which is presented in this book aimed at replacing the conventional airport control tower by a new 'remote tower operation' work environment (RTO) which should enhance work efficiency and safety and reduce costs. This revolutionary human-system interface allows for remote aerodrome traffic control without a physical tower building and enables the establishment of remote airport traffic control centers (RTC) of which each may serve several airports from a central location. 360 pp. Englisch.

Condition: New. PRINT ON DEMAND.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Covers most relevant aspects from basic psychophysical considerations over work analysis to design, applied optics and engineeringShows how to replace the conventional airport control tower by a new Remote Tower work environmentPresents i.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book presents the interdisciplinary and international żVirtual and Remote Towerż research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new żRemote Tower Operationż (RTO) work environment for enhancing work efficiency and safety and reducing cost. The revolutionary humanżsystem interface replaces the out-of-windows view by an augmented vision video panorama that allows for remote aerodrome traffic control without a physical tower building. It enables the establishment of a (multiple) remote control center (MRTO, RTC) that may serve several airports from a central location. The first (2016) edition of this book covered all aspects from preconditions over basic research and prototype development to initial validation experiments with field testing. Co-edited and -authored by DLR RTO-team members Dr. Anne Papenfuss and Jörn Jakobi, this second extended edition with nearly doubled numberof chapters includes further important aspects of the international follow-up work towards the RTO-deployment. Focus of the extension with new contributions from ENRI/Japan and IAA/Dublin with Cranfield University, is on MRTO, workload, implementation, and standardization. Specifically, the two revised and nine new Chapters put the focus on inclusion of augmented vision and virtual reality technologies, human-in-the-loop simulation for quantifying workload and deriving minimum (technical) requirements according to standards of the European Organization for Civil Aviation Equipment (EUROCAE), and MRTO implementation and certification. Basics of optical / video design, workload measures, and advanced psychophysical data analysis are presented in four appendices.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 644 pp. Englisch.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This book presents the interdisciplinary and international Virtual and Remote Tower research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new Remote Tower.

Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book presents the interdisciplinary and international 'Virtual and Remote Tower' research and development work. It has been carried out since nearly twenty years with the goal of replacing the conventional aerodrome control tower by a new 'Remote Tower Operation' (RTO) work environment for enhancing work efficiency and safety and reducing cost. The revolutionary human-system interface replaces the out-of-windows view by an augmented vision video panorama that allows for remote aerodrome traffic control without a physical tower building. It enables the establishment of a (multiple) remote control center (MRTO, RTC) that may serve several airports from a central location. The first (2016) edition of this book covered all aspects from preconditions over basic research and prototype development to initial validation experiments with field testing. Co-edited and -authored by DLR RTO-team members Dr. Anne Papenfuss and Jörn Jakobi, this second extended edition with nearly doubled numberof chapters includes further important aspects of the international follow-up work towards the RTO-deployment. Focus of the extension with new contributions from ENRI/Japan and IAA/Dublin with Cranfield University, is on MRTO, workload, implementation, and standardization. Specifically, the two revised and nine new Chapters put the focus on inclusion of augmented vision and virtual reality technologies, human-in-the-loop simulation for quantifying workload and deriving minimum (technical) requirements according to standards of the European Organization for Civil Aviation Equipment (EUROCAE), and MRTO implementation and certification. Basics of optical / video design, workload measures, and advanced psychophysical data analysis are presented in four appendices. 644 pp. Englisch.

Condition: New. Print on Demand pp. 337.

Condition: New. PRINT ON DEMAND pp. 337.