Surface Modification Ttitanium Alloys by Mohammad Khanlou (7 results)

Paperback. Condition: Brand New. 80 pages. 8.66x5.91x0.19 inches. In Stock.

paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condition: Neu. Surface Modification of Ttitanium Alloys Prior To PVD Coating | The Effect of Two Different Acid Solution on Surface of Non-Toxic Ti-13Zr-13Nb | Hossein Mohammad Khanlou (u. a.) | Taschenbuch | 80 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9783659227486 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this project, Ti13Zr13Nb alloy was investigated in term of surface pre-treatment using two different types of acids, i.e. H2SO4 and Kroll's etchant solutions. Prior to etching, all substrates were cut, polished and blasted at identical conditions. Al2O3 abrasive particles of 150 µm mean grain size were used to blast. Consequently, substrates were etched using two different acid solution (H2SO4 66% and Kroll's etchant) at three different temperatures (25ºC, 45ºC, 60ºC) and varied times (10 s, 20 s, 30 s). Surface morphologies of etched substrates were evaluated under Field Emission-Scanning Electron Microscope equipped with Energy Dispersive Analysis X-ray (EDAX) and Atomic Force Microscopy (AFM). Surface roughness of treated samples were measured using the surface roughness machine. Finally, Kroll's etchant with 30 seconds and 45ºC considers the best condition for providing surface roughness, at 400 nanometer (Ra) which is believed as good surface prior to PVD coating. 80 pp. Englisch.…

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this project, Ti13Zr13Nb alloy was investigated in term of surface pre-treatment using two different types of acids, i.e. H2SO4 and Kroll's etchant solutions. Prior to etching, all substrates were cut, polished and blasted at identical conditions. Al2O3 abrasive particles of 150 µm mean grain size were used to blast. Consequently, substrates were etched using two different acid solution (H2SO4 66% and Kroll's etchant) at three different temperatures (25ºC, 45ºC, 60ºC) and varied times (10 s, 20 s, 30 s). Surface morphologies of etched substrates were evaluated under Field Emission-Scanning Electron Microscope equipped with Energy Dispersive Analysis X-ray (EDAX) and Atomic Force Microscopy (AFM). Surface roughness of treated samples were measured using the surface roughness machine. Finally, Kroll's etchant with 30 seconds and 45ºC considers the best condition for providing surface roughness, at 400 nanometer (Ra) which is believed as good surface prior to PVD coating. …

Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Mohammad Khanlou HosseinMr. Hossein Mohamad Khanlou obtained his Master degree in Mechanical Engineering from University Technology Malaysia (UTM). He has been a researcher with University Malaya since 2013. His research interests ar. …

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this project, Ti13Zr13Nb alloy was investigated in term of surface pre-treatment using two different types of acids, i.e. H2SO4 and Kroll's etchant solutions. Prior to etching, all substrates were cut, polished and blasted at identical conditions. Al2O3 abrasive particles of 150 µm mean grain size were used to blast. Consequently, substrates were etched using two different acid solution (H2SO4 66% and Kroll's etchant) at three different temperatures (25ºC, 45ºC, 60ºC) and varied times (10 s, 20 s, 30 s). Surface morphologies of etched substrates were evaluated under Field Emission-Scanning Electron Microscope equipped with Energy Dispersive Analysis X-ray (EDAX) and Atomic Force Microscopy (AFM). Surface roughness of treated samples were measured using the surface roughness machine. Finally, Kroll's etchant with 30 seconds and 45ºC considers the best condition for providing surface roughness, at 400 nanometer (Ra) which is believed as good surface prior to PVD coating.OmniScriptum SRL, Str. Armeneasca 28/1, office 1, 2012 Chisinau 80 pp. Englisch. …