Solid Liquid Separation by Svarovsky Ladislav (22 results)

Hardcover. Condition: UsedGood. Hardcover; Butterworths Monographs in Chemistry and Chemical Engineering; s urplus library copy with the usual stampings and reference number affixed t o the spine; fading and shelf wear to exterior; bumps to the upper front co rner, lower front edge and the top spine end; otherwise in good condition w ith clean text and tight binding.…

HARDCOVER. Condition: Good. Spine rolled with a 3 inch split to rear pastedown. Binding solid, pages crisp and clean, some underlining and marginalia scattered throughout. Rear fly page folded. Back corner had hard crease / tear. Covers bright and shiny with light scuffs and dents. Extremities lightly bumped with tip wear.…

Hardcover. Condition: UsedVeryGood. Hardcover, third edition; light fading, scuffing; small tear at top of spin e; in very good condition with clean text, firm binding.

Hardcover. Condition: Fine. Butterworths hardcover sans dust jacket (as issued), 2nd edition- 1981 printing, clean/tight, No marks/creases or signs of use, Fine (like New). We will bubble wrap the book and ship it in a New BOX- Not a plastic bag like the zombie sellers.

Third edition. Thorough examination of theory and practice of filtration (magnetic; membrane are new to this 1990 edition), concepts, equipment, design, fine particle recycling, etc. -- Hardcover, printed glossy covers, 716 pages. Condition: very good (owner name blacked out; couple pages have hi-lites).…

Condition: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1500grams, ISBN:9780408037655.…

Paperback. Condition: Brand New. 346 pages. 9.50x6.00x0.78 inches. In Stock.

Original Broschur. 145 Seiten 24x18,5 Sehr gut, fast ungelesen. Volume 5 of Handbook of powder technology series. 900 Gramm Sprache: Englisch.

Condition: Fair. Volume 5 of Handbook of powder technology series. This book has soft covers. Ex-library, With usual stamps and markings, In fair condition, suitable as a study copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,450grams, ISBN. …

Paperback. Condition: Brand New. 730 pages. 9.50x6.25x1.65 inches. In Stock.

Condition: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.…

Hardcover. Condition: New.

Condition: New. pp. 572 Illus.

Hardcover. Condition: Brand New. 4th edition. 576 pages. 9.50x6.25x1.25 inches. In Stock.

Condition: New. pp. 572 4th Edition.

Condition: New. pp. 572.

Paperback. Condition: Brand New. 568 pages. 9.50x6.00x1.28 inches. In Stock.

paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

hardcover. Condition: New. In shrink wrap. Looks like an interesting title.

Condition: new. Questo è un articolo print on demand.

Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Solid Liquid Separation includes important industrial processes used for recovery and processing of solids or purification of liquids. Most of the process industries in which particulate slurries are handled use some form of solid-liquid separation and yet the subject is not adequately covered in most higher education courses. This book is designed to bring the readers up-to-date on the principles and industrial practices of solid-liquid separation and washing technology. Particular attention is given to hardware and to its evaluation, application and selection. Whilst not exclusively concerned with filtration and sedimentation, these operations will be dealt with in depth. Important variations in the available equipment will be discussed throughout the book with emphasis on basic engineering concepts, equipment selection and evaluation, solids washing, methods of pre-treatment, filter aids and other practical aspects of mechanical separation. This book is intended for engineers and scientists of graduate status who are engaged in design, production for research and development. This book is designed to bring the readers up-to-date on the principles and industrial practices of solid-liquid separation and washing technology. Particular attention is given to hardware and to its evaluation, application and selection. Whilst not exclusively concerned with filtration and sedimentation, these operations are dealt with in depth. Important variations in the available equipment are discussed throughout the book with emphasis on basic engineering concepts, equipment selection and evaluation, solids washing, methods of pre-treatment, filter aids and other practical aspects of mechanical separation. This book is intended for engineers and scientists of graduate status who are engaged in design, production for research and development. Englisch.…

Buch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Solid Liquid Separation includes important industrial processes used for recovery and processing of solids or purification of liquids. Most of the process industries in which particulate slurries are handled use some form of solid-liquid separation and yet the subject is not adequately covered in most higher education courses. This book is designed to bring the readers up-to-date on the principles and industrial practices of solid-liquid separation and washing technology. Particular attention is given to hardware and to its evaluation, application and selection. Whilst not exclusively concerned with filtration and sedimentation, these operations will be dealt with in depth. Important variations in the available equipment will be discussed throughout the book with emphasis on basic engineering concepts, equipment selection and evaluation, solids washing, methods of pre-treatment, filter aids and other practical aspects of mechanical separation. This book is intended for engineers and scientists of graduate status who are engaged in design, production for research and development. This book is designed to bring the readers up-to-date on the principles and industrial practices of solid-liquid separation and washing technology. Particular attention is given to hardware and to its evaluation, application and selection. Whilst not exclusively concerned with filtration and sedimentation, these operations are dealt with in depth. Important variations in the available equipment are discussed throughout the book with emphasis on basic engineering concepts, equipment selection and evaluation, solids washing, methods of pre-treatment, filter aids and other practical aspects of mechanical separation. This book is intended for engineers and scientists of graduate status who are engaged in design, production for research and development.…