Printing Additive Manufacturing Technologies (81 results)
- Hardcover
Seller: HPB-Diamond, Dallas, TX, U.S.A.HPB-Diamond
Contact seller5-star sellerCondition: Used - Very good
£ 27.05
£ 2.83 shippingShips within U.S.A.Quantity: 1 available
hardcover. Condition: Very Good. Connecting readers with great books since 1972! Used books may not include companion materials, and may have some shelf wear or limited writing. We ship orders daily and Customer Service is our top priority.
- Hardcover
Seller: Universitätsbuchhandlung Herta Hold GmbH, Berlin, , GermanyUniversitätsbuchhandlung Herta Hold GmbH
Contact seller4-star sellerCondition: Used
£ 12.50
£ 26.02 shippingShips from Germany to U.S.A.Quantity: 4 available
Second Edition. XXI, 498 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. 2nd ed. Stamped. Sprache: Englisch.
- Hardcover
Seller: HPB Inc., Dallas, TX, U.S.A.HPB Inc.
Contact seller5-star sellerCondition: Used - Very good
£ 42.80
£ 2.83 shippingShips within U.S.A.Quantity: 1 available
hardcover. Condition: Very Good. Connecting readers with great books since 1972! Used books may not include companion materials, and may have some shelf wear or limited writing. We ship orders daily and Customer Service is our top priority.
Published by Springer
Seller: FirstClassBooks, Little Rock, AR, U.S.A.FirstClassBooks
Contact seller5-star sellerCondition: Used - Good
£ 30.29
£ 3.02 shippingShips within U.S.A.Quantity: 5 available
Condition: Good. Used books cannot guarantee unused access codes or working CD's.
- Hardcover
Seller: Anybook.com, Lincoln, United KingdomAnybook.com
Contact seller5-star sellerCondition: Used - Good
£ 64.63
£ 13.60 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1050grams, ISBN:9781493921126.
- Hardcover
Seller: Anybook.com, Lincoln, United KingdomAnybook.com
Contact seller5-star sellerCondition: Used - Good
£ 64.63
£ 13.60 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1050grams, ISBN:9781493921126.
- Softcover
Seller: HPB-Red, Dallas, TX, U.S.A.HPB-Red
Contact seller5-star sellerCondition: Used - Good
£ 93.95
£ 2.83 shippingShips within U.S.A.Quantity: 1 available
paperback. Condition: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 6 of 9. Book 6 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 106.37
£ 3.02 shippingShips within U.S.A.Quantity: 1 available
Condition: New. 1st edition NO-PA16APR2015-KAP.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 6 of 9. Book 6 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 109.59
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: New.
- Hardcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 119.04
£ 3.02 shippingShips within U.S.A.Quantity: 1 available
Condition: New. 1st edition NO-PA16APR2015-KAP.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 6 of 9. Book 6 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Revaluation Books, Exeter, , United KingdomRevaluation Books
Contact seller5-star sellerCondition: New
£ 111.07
£ 10.00 shippingShips from United Kingdom to U.S.A.Quantity: 2 available
Paperback. Condition: Brand New. 340 pages. 8.75x6.00x0.50 inches. In Stock.
- Hardcover
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 121.97
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: New.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 6 of 9. Book 6 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 115.13
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 6 of 9. Book 6 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 134.36
£ 8.63 shippingShips from Germany to U.S.A.Quantity: 3 available
Condition: New.
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: Used - Fine
£ 86.48
£ 56.33 shippingShips from Germany to U.S.A.Quantity: 1 available
Gebundene Ausgabe. Condition: Sehr gut. Gebraucht - Sehr gut sg - umschlag leicht berieben / beschädigt, ungelesenes mängelexemplar, gestempelt - This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fun…damentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 137.84
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
- Softcover
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 155.82
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 3 available
Condition: New.
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 167.59
£ 3.02 shippingShips within U.S.A.Quantity: 3 available
Condition: New. 1st edition NO-PA16APR2015-KAP.
- Hardcover
Seller: Buchpark, Trebbin, , GermanyBuchpark
Contact seller5-star sellerCondition: Used - Fine
£ 82.36
£ 91.06 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | This edited volume comprises select chapters on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, prototypes and pattern…s. Because of its wide applications, 3D printing and additive manufacturing technology has become a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across industries such as consumer products, aerospace, medical devices and automotives. The objective of this book is to help designers, R&D personnel, and practicing engineers understand the state-of-the-art developments in the field of 3D Printing and Additive Manufacturing.
- Softcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 160.25
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 8 of 9. Book 8 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Anybook.com, Lincoln, United KingdomAnybook.com
Contact seller5-star sellerCondition: Used - Good
£ 140.00
£ 31.40 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Condition: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISBN:9780323954303.
- Hardcover
Seller: GoldBooks, Denver, CO, U.S.A.GoldBooks
Contact seller5-star sellerCondition: New
£ 173.42
£ 4.16 shippingShips within U.S.A.Quantity: 1 available
Hardcover. Condition: new. New Copy. Customer Service Guaranteed.
- Hardcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 182.10
£ 3.02 shippingShips within U.S.A.Quantity: 4 available
Condition: New. pp. 150.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 7 of 9. Book 7 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 180.90
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 3 available
Condition: New.
Language: English
Published by Elsevier 2022
Series: Additive Manufacturing Materials and Technologies, Book 8 of 9. Book 8 of 9 - Additive Manufacturing Materials and Technologies
- Softcover
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 180.90
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 3 available
Condition: New.
- Softcover
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 178.37
£ 8.63 shippingShips from Germany to U.S.A.Quantity: 3 available
Condition: New.
- Softcover
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 125.05
£ 60.70 shippingShips from Germany to U.S.A.Quantity: 5 available
Taschenbuch. Condition: Neu. Advances in 3D Printing & Additive Manufacturing Technologies | David Ian Wimpenny (u. a.) | Taschenbuch | xiii | Englisch | 2018 | Springer | EAN 9789811092589 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | A…nbieter: preigu.
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: New
£ 186.34
£ 2.00 shippingShips within U.S.A.Quantity: 15 available
Condition: New.
- Softcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 186.73
£ 3.02 shippingShips within U.S.A.Quantity: 4 available
Condition: New. pp. 186.
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: Used - As new
£ 193.59
£ 2.00 shippingShips within U.S.A.Quantity: 15 available
Condition: As New. Unread book in perfect condition.
