Machining Performance Analysis Aisi by Kumar Santosh (7 results)

Condition: New.

Taschenbuch. Condition: Neu. Machining Performance Analysis of AISI 304 Austenitic Stainless Steel | Santosh Kumar (u. a.) | Taschenbuch | Englisch | 2022 | LAP LAMBERT Academic Publishing | EAN 9786204978086 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu.…

Condition: New. Print on Demand.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In the current experimental work an attempt has been made to analyze the machining performance of AISI 304 austenitic stainless steel with (PVD) TiAlN coated carbide tool under distinct turning environments (dry, flooded and vortex tube assisted cooling). The surface roughness of machined surface under dry, flooded and vortex tube assisted cooling condition was measured to be 0.93mim, 0.42 mim and 0.29 mim respectively. From the results, it was observed that vortex tube assisted turning offered better results in terms of surface roughness and tool flank wear than flooded and dry machining. The surface roughness of sample (AISI-304 steel) turned through vortex tube assisted cooling is reduced by 68.8% and 30.9% over dry and flooded coolant conditions respectively. In addition, the tool flank wear was lesser under vortex assisted turning than dry turning and flooded turning environment. Further, the flank tool wear were studied using SEM analysis. Overall, vortex tube assisted cooling is better option to replace turning under flooded coolant for sustainable future. 68 pp. Englisch.…

Condition: New. PRINT ON DEMAND.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Kumar SantoshDr. Santosh Kumar and Dr. Amresh Kumar is working as Associate Professor in the department of Mechanical Engineering, Chandigarh Group of Colleges, Landran Mohali Punjab. Both the authors has published many research pape.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the current experimental work an attempt has been made to analyze the machining performance of AISI 304 austenitic stainless steel with (PVD) TiAlN coated carbide tool under distinct turning environments (dry, flooded and vortex tube assisted cooling). The surface roughness of machined surface under dry, flooded and vortex tube assisted cooling condition was measured to be 0.93¿m, 0.42 ¿m and 0.29 ¿m respectively. From the results, it was observed that vortex tube assisted turning offered better results in terms of surface roughness and tool flank wear than flooded and dry machining. The surface roughness of sample (AISI-304 steel) turned through vortex tube assisted cooling is reduced by 68.8% and 30.9% over dry and flooded coolant conditions respectively. In addition, the tool flank wear was lesser under vortex assisted turning than dry turning and flooded turning environment. Further, the flank tool wear were studied using SEM analysis. Overall, vortex tube assisted cooling is better option to replace turning under flooded coolant for sustainable future.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 68 pp. Englisch.…