Finite Element Study Plane by Betts Juan (13 results)

Condition: New.

Condition: New. In.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Master's Thesis from the year 1998 in the subject Engineering - Communication Technology, Virginia State University (Unbekannt), language: English, abstract: Inhaltsangabe:Abstract:This thesis studied the finite element modeling of plane wave acoustic phenomena in ducts. The study looked into finite element factors such as shape functions, mesh refinement, and element distortion.The study concluded that the higher order shape function eight-node quadrilateral element gave considerably better results than lower order shape function four-node quadrilateral element. The eight-node element converged much faster to the analytical solution than the four-node element. The average error, taking all the cases in consideration, for the four-node element was around 30 % for a mesh refinement of about 14 elements per wavelength at 100 Hz frequency. The eight-node element in the other hand had average absolute errors of less than 1% under the same conditions.This section also found that the eight-node element was substantially more resistant to solution deterioration due to element distortion than the four-node element.For example distorting the four-node element up to 60° degrees usually increased errors very rapidly to above 100 % errors. The eight-node element on the other hand usually produced errors of less than 5 % for the same level of distortion.The study showed that the type of boundary condition used had a significant effect on the solution accuracy. The study demonstrated that the effect of the natural boundary conditions was more global. Meeting this kind of boundary condition through mesh convergence produced accurate results throughout the duct.Inhaltsverzeichnis:Table of Contents:1.Introduction11.1Purpose and Methods11.2Literature Review22.Theoretical Analysis42.1Acoustics Fundamentals42.2Analytical Solutions112.3Finite Element Method163.Results & Discussion223.1Finite Element Mesh Refinement Analysis233.2Finite Element Distortion Analysis373.3Finite Element Mesh Refinement Analysis Revisited474.Conclusions & Recommendations505.Appendix A526.Appendix B638.References689.Vita69 84 pp. Englisch.…

Condition: New. Print on Demand pp. 84 424:B&W 5.83 x 8.27 in or 210 x 148 mm (A5) Perfect Bound on Creme w/Matte Lam.

Condition: New. Print on Demand pp. 84.

Condition: New. PRINT ON DEMAND pp. 84.

PAP. Condition: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Master s Thesis from the year 1998 in the subject Engineering - Communication Technology, Virginia State University (Unbekannt), language: English, abstract: Inhaltsangabe:Abstract:This thesis studied the finite element modeling of plane wave acoustic.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Inhaltsangabe:Abstract:This thesis studied the finite element modeling of plane wave acoustic phenomena in ducts. The study looked into finite element factors such as shape functions, mesh refinement, and element distortion. The study concluded that the higher order shape function eight-node quadrilateral element gave considerably better results than lower order shape function four-node quadrilateral element. The eight-node element converged much faster to the analytical solution than the four-node element. The average error, taking all the cases in consideration, for the four-node element was around 30 % for a mesh refinement of about 14 elements per wavelength at 100 Hz frequency. The eight-node element in the other hand had average absolute errors of less than 1% under the same conditions. This section also found that the eight-node element was substantially more resistant to solution deterioration due to element distortion than the four-node element. For example distorting the four-node element up to 60° degrees usually increased errors very rapidly to above 100 % errors. The eight-node element on the other hand usually produced errors of less than 5 % for the same level of distortion. The study showed that the type of boundary condition used had a significant effect on the solution accuracy. The study demonstrated that the effect of the natural boundary conditions was more global. Meeting this kind of boundary condition through mesh convergence produced accurate results throughout the duct. Inhaltsverzeichnis:Table of Contents: 1.Introduction1 1.1Purpose and Methods1 1.2Literature Review2 2.Theoretical Analysis4 2.1Acoustics Fundamentals4 2.2Analytical Solutions11 2.3Finite Element Method16 3.Results & Discussion22 3.1Finite Element Mesh Refinement Analysis23 3.2Finite Element Distortion Analysis37 3.3Finite Element Mesh Refinement Analysis Revisited47 4.Conclusions & Recommendations50 5.Appendix A52 6.Appendix B63 8.References68 9.Vita69Diplomica Verlag, Hermannstal 119k, 22119 Hamburg 84 pp. Englisch.…

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Master's Thesis from the year 1998 in the subject Engineering - Communication Technology, Virginia State University (Unbekannt), language: English, abstract: Inhaltsangabe:Abstract:This thesis studied the finite element modeling of plane wave acoustic phenomena in ducts. The study looked into finite element factors such as shape functions, mesh refinement, and element distortion.The study concluded that the higher order shape function eight-node quadrilateral element gave considerably better results than lower order shape function four-node quadrilateral element. The eight-node element converged much faster to the analytical solution than the four-node element. The average error, taking all the cases in consideration, for the four-node element was around 30 % for a mesh refinement of about 14 elements per wavelength at 100 Hz frequency. The eight-node element in the other hand had average absolute errors of less than 1% under the same conditions.This section also found that the eight-node element was substantially more resistant to solution deterioration due to element distortion than the four-node element.For example distorting the four-node element up to 60° degrees usually increased errors very rapidly to above 100 % errors. The eight-node element on the other hand usually produced errors of less than 5 % for the same level of distortion.The study showed that the type of boundary condition used had a significant effect on the solution accuracy. The study demonstrated that the effect of the natural boundary conditions was more global. Meeting this kind of boundary condition through mesh convergence produced accurate results throughout the duct.Inhaltsverzeichnis:Table of Contents:1.Introduction11.1Purpose and Methods11.2Literature Review22.Theoretical Analysis42.1Acoustics Fundamentals42.2Analytical Solutions112.3Finite Element Method163.Results & Discussion223.1Finite Element Mesh Refinement Analysis233.2Finite Element Distortion Analysis373.3Finite Element Mesh Refinement Analysis Revisited474.Conclusions & Recommendations505.Appendix A526.Appendix B638.References689.Vita69.…

Taschenbuch. Condition: Neu. Finite Element Study of Plane Wave Acoustic Phenomena in Ducts | Juan Betts | Taschenbuch | 84 S. | Englisch | 2000 | [.] | EAN 9783838620060 | Verantwortliche Person für die EU: Bedey und Thoms Media GmbH, Hermannstal 119k, 22119 Hamburg, kontakt[at]bedey-media[dot]de | Anbieter: preigu Print on Demand.…