Content Based Access Multimedia Information by Perry Brad (24 results)

Condition: Good. *Price HAS BEEN REDUCED by 10% until Monday, Oct. 20 (sale item)* 143 pp., hardcover, ex library, else text and binding still clean tight and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Paperback. Condition: new. Paperback. In the past five years, the field of electrostatic discharge (ESD) control has under gone some notable changes. Industry standards have multiplied, though not all of these, in our view, are realistic and meaningful. Increasing importance has been ascribed to the Charged Device Model (CDM) versus the Human Body Model (HBM) as a cause of device damage and, presumably, premature (latent) failure. Packaging materials have significantly evolved. Air ionization techniques have improved, and usage has grown. Finally, and importantly, the government has ceased imposing MIL-STD-1686 on all new contracts, leaving companies on their own to formulate an ESD-control policy and write implementing documents. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. More than ever, the book seeks to provide advice, guidance, and practical ex amples, not just a jumble of facts and generalizations. For instance, the added tailored versions of the model specifications for ESD-safe handling and packaging are actually in use at medium-sized corporations and could serve as patterns for many readers. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condition: New.

Condition: New.

Condition: New. In.

Condition: New. In.

Condition: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Condition: New. pp. 160.

Condition: New.

Condition: New. pp. 160.

Condition: New. Microelectronics and Computer Technology Corporation and its member companies carried out a study in 1997 to investigate the advances in technologies for annotating and manipulating large-scale networks of multimedia information objects with content-based concepts. This book documents the study's technology assessment and identifies shortcomings. Series: The Springer International Series in Engineering and Computer Science. Num Pages: 143 pages, biography. BIC Classification: UN. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 11. Weight in Grams: 890. . 1999. Hardback. . . . .

Gebunden. Condition: New.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - In the past five years, the field of electrostatic discharge (ESD) control has under gone some notable changes. Industry standards have multiplied, though not all of these, in our view, are realistic and meaningful. Increasing importance has been ascribed to the Charged Device Model (CDM) versus the Human Body Model (HBM) as a cause of device damage and, presumably, premature (latent) failure. Packaging materials have significantly evolved. Air ionization techniques have improved, and usage has grown. Finally, and importantly, the government has ceased imposing MIL-STD-1686 on all new contracts, leaving companies on their own to formulate an ESD-control policy and write implementing documents. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. More than ever, the book seeks to provide advice, guidance, and practical ex amples, not just a jumble of facts and generalizations. For instance, the added tailored versions of the model specifications for ESD-safe handling and packaging are actually in use at medium-sized corporations and could serve as patterns for many readers.

Paperback. Condition: Like New. Like New. book.

Condition: New. Microelectronics and Computer Technology Corporation and its member companies carried out a study in 1997 to investigate the advances in technologies for annotating and manipulating large-scale networks of multimedia information objects with content-based concepts. This book documents the study's technology assessment and identifies shortcomings. Series: The Springer International Series in Engineering and Computer Science. Num Pages: 143 pages, biography. BIC Classification: UN. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 11. Weight in Grams: 890. . 1999. Hardback. . . . . Books ship from the US and Ireland.

Paperback. Condition: new. Paperback. In the past five years, the field of electrostatic discharge (ESD) control has under gone some notable changes. Industry standards have multiplied, though not all of these, in our view, are realistic and meaningful. Increasing importance has been ascribed to the Charged Device Model (CDM) versus the Human Body Model (HBM) as a cause of device damage and, presumably, premature (latent) failure. Packaging materials have significantly evolved. Air ionization techniques have improved, and usage has grown. Finally, and importantly, the government has ceased imposing MIL-STD-1686 on all new contracts, leaving companies on their own to formulate an ESD-control policy and write implementing documents. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. More than ever, the book seeks to provide advice, guidance, and practical ex amples, not just a jumble of facts and generalizations. For instance, the added tailored versions of the model specifications for ESD-safe handling and packaging are actually in use at medium-sized corporations and could serve as patterns for many readers. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Buch. Condition: Neu. Neuware - In the past five years, the field of electrostatic discharge (ESD) control has under gone some notable changes. Industry standards have multiplied, though not all of these, in our view, are realistic and meaningful. Increasing importance has been ascribed to the Charged Device Model (CDM) versus the Human Body Model (HBM) as a cause of device damage and, presumably, premature (latent) failure. Packaging materials have significantly evolved. Air ionization techniques have improved, and usage has grown. Finally, and importantly, the government has ceased imposing MIL-STD-1686 on all new contracts, leaving companies on their own to formulate an ESD-control policy and write implementing documents. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. More than ever, the book seeks to provide advice, guidance, and practical ex amples, not just a jumble of facts and generalizations. For instance, the added tailored versions of the model specifications for ESD-safe handling and packaging are actually in use at medium-sized corporations and could serve as patterns for many readers.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In the past five years, the field of electrostatic discharge (ESD) control has under gone some notable changes. Industry standards have multiplied, though not all of these, in our view, are realistic and meaningful. Increasing importance has been ascribed to the Charged Device Model (CDM) versus the Human Body Model (HBM) as a cause of device damage and, presumably, premature (latent) failure. Packaging materials have significantly evolved. Air ionization techniques have improved, and usage has grown. Finally, and importantly, the government has ceased imposing MIL-STD-1686 on all new contracts, leaving companies on their own to formulate an ESD-control policy and write implementing documents. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. More than ever, the book seeks to provide advice, guidance, and practical ex amples, not just a jumble of facts and generalizations. For instance, the added tailored versions of the model specifications for ESD-safe handling and packaging are actually in use at medium-sized corporations and could serve as patterns for many readers. 160 pp. Englisch.

Condition: New. Print on Demand pp. 160 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Condition: New. Print on Demand pp. 160 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Hardback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days 920.

Condition: New. PRINT ON DEMAND pp. 160.

Condition: New. PRINT ON DEMAND pp. 160.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the past five years, the field of electrostatic discharge (ESD) control has under gone some notable changes. Industry standards have multiplied, though not all of these, in our view, are realistic and meaningful. Increasing importance has been ascribed to the Charged Device Model (CDM) versus the Human Body Model (HBM) as a cause of device damage and, presumably, premature (latent) failure. Packaging materials have significantly evolved. Air ionization techniques have improved, and usage has grown. Finally, and importantly, the government has ceased imposing MIL-STD-1686 on all new contracts, leaving companies on their own to formulate an ESD-control policy and write implementing documents. All these changes are dealt with in five new chapters and ten new reprinted papers added to this revised edition of ESD from A to Z. Also, the original chapters have been augmented with new material such as more troubleshooting examples in Chapter 8 and a 20-question multiple-choice test for certifying operators in Chapter 9. More than ever, the book seeks to provide advice, guidance, and practical ex amples, not just a jumble of facts and generalizations. For instance, the added tailored versions of the model specifications for ESD-safe handling and packaging are actually in use at medium-sized corporations and could serve as patterns for many readers.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 160 pp. Englisch.