Computer Aided Engineering Gear by Shibe Vineet (8 results)

Condition: New. pp. 72.

Taschenbuch. Condition: Neu. Computer Aided Engineering of Gear Box | Stress Anaylsis Using ANSYS | Vineet Shibe | Taschenbuch | 72 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659384639 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Advances in engineering technology in recent years have brought demands for gear teeth, which can operate at ever increasing load capacities and speeds. The gears generally fail when tooth stress exceeds the safe limit. Therefore, it is essential to determine the maximum stress that a gear tooth is subjected to, under a specified loading. When failure occurs, they are expensive not only in terms of the cost of replacement or repair but also the cost associated with the downtime of the system of which they are a part. Reliability is thus a critical economic factor and for designer to produce gears with high reliability they need to be able to accurately predict the stress experienced by the loaded gear teeth. The major problems being faced in the gearbox manufactured by Kay Kay Industrial Corporation, Patiala are interference, surface fatigue and fracture. In order to analyze the exact failure point and the stress levels at which gear is failing, the modeling and stress analysis of the gear box has been done in Pro-E & ANSYS respectively. The necessary design modifications have also been made to rectify these problems. 72 pp. Englisch.…

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Advances in engineering technology in recent years have brought demands for gear teeth, which can operate at ever increasing load capacities and speeds. The gears generally fail when tooth stress exceeds the safe limit. Therefore, it is essential to determine the maximum stress that a gear tooth is subjected to, under a specified loading. When failure occurs, they are expensive not only in terms of the cost of replacement or repair but also the cost associated with the downtime of the system of which they are a part. Reliability is thus a critical economic factor and for designer to produce gears with high reliability they need to be able to accurately predict the stress experienced by the loaded gear teeth. The major problems being faced in the gearbox manufactured by Kay Kay Industrial Corporation, Patiala are interference, surface fatigue and fracture. In order to analyze the exact failure point and the stress levels at which gear is failing, the modeling and stress analysis of the gear box has been done in Pro-E & ANSYS respectively. The necessary design modifications have also been made to rectify these problems.…

Condition: New. Print on Demand pp. 72 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam.

Condition: New. PRINT ON DEMAND pp. 72.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shibe VineetVineet Shibe is a Research Scholar in Punjab Technical University, Jalandhar & is working as an Assistant Professor in the Department of Mechanical Engineering at B.H.S.B.I.E.T.(Established. & Promoted by Government of P.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Advances in engineering technology in recent years have brought demands for gear teeth, which can operate at ever increasing load capacities and speeds. The gears generally fail when tooth stress exceeds the safe limit. Therefore, it is essential to determine the maximum stress that a gear tooth is subjected to, under a specified loading. When failure occurs, they are expensive not only in terms of the cost of replacement or repair but also the cost associated with the downtime of the system of which they are a part. Reliability is thus a critical economic factor and for designer to produce gears with high reliability they need to be able to accurately predict the stress experienced by the loaded gear teeth. The major problems being faced in the gearbox manufactured by Kay Kay Industrial Corporation, Patiala are interference, surface fatigue and fracture. In order to analyze the exact failure point and the stress levels at which gear is failing, the modeling and stress analysis of the gear box has been done in Pro-E & ANSYS respectively. The necessary design modifications have also been made to rectify these problems.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 72 pp. Englisch.…