Application Control Completeness Coating by Suschev Andrey (8 results)

Condition: New.

Taschenbuch. Condition: Neu. Application and control of completeness of coating removal from uranium parts | Andrey Alexeevich Suschev | Taschenbuch | Englisch | 2022 | Our Knowledge Publishing | EAN 9786204380216 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The book contains materials on the development of tooling, which improves the uniformity of thin films deposited in a vacuum chamber during thermal evaporation of material from boats onto a substrate with a diameter of more than 100 mm. The author suggested types of radio parts and an electric scheme for rotation of the substrate in the tooling, and drawings of the main metal parts for manufacturing and assembling the tooling. During coating of uranium substrates an important factor is the preparation of surfaces for sputtering of other material. Describing the standard process, the author notes that the use of alcohol in the final cleaning of the uranium substrate sometimes prevented good adhesion between the substrate and the applied thin metal layer. Attached are photographs with material science studies that show the results of using tooling well. A method of removing the coating from uranium samples with a metal brush is shown. The low efficiency of this method is justified with the attached material science studies made on an electron microscope. On the same samples proposed a method of revealing the quality of cleaning with a luminescent method of control. Conclusions are made and the best variants of the luminescent method are determined. 52 pp. Englisch.

Condition: New. Print on Demand.

Condition: New. PRINT ON DEMAND.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. The book contains materials on the development of tooling, which improves the uniformity of thin films deposited in a vacuum chamber during thermal evaporation of material from boats onto a substrate with a diameter of more than 100 mm. The author suggested.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The book contains materials on the development of tooling, which improves the uniformity of thin films deposited in a vacuum chamber during thermal evaporation of material from boats onto a substrate with a diameter of more than 100 mm. The author suggested types of radio parts and an electric scheme for rotation of the substrate in the tooling, and drawings of the main metal parts for manufacturing and assembling the tooling. During coating of uranium substrates an important factor is the preparation of surfaces for sputtering of other material. Describing the standard process, the author notes that the use of alcohol in the final cleaning of the uranium substrate sometimes prevented good adhesion between the substrate and the applied thin metal layer. Attached are photographs with material science studies that show the results of using tooling well. A method of removing the coating from uranium samples with a metal brush is shown. The low efficiency of this method is justified with the attached material science studies made on an electron microscope. On the same samples proposed a method of revealing the quality of cleaning with a luminescent method of control. Conclusions are made and the best variants of the luminescent method are determined.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 52 pp. Englisch.

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The book contains materials on the development of tooling, which improves the uniformity of thin films deposited in a vacuum chamber during thermal evaporation of material from boats onto a substrate with a diameter of more than 100 mm. The author suggested types of radio parts and an electric scheme for rotation of the substrate in the tooling, and drawings of the main metal parts for manufacturing and assembling the tooling. During coating of uranium substrates an important factor is the preparation of surfaces for sputtering of other material. Describing the standard process, the author notes that the use of alcohol in the final cleaning of the uranium substrate sometimes prevented good adhesion between the substrate and the applied thin metal layer. Attached are photographs with material science studies that show the results of using tooling well. A method of removing the coating from uranium samples with a metal brush is shown. The low efficiency of this method is justified with the attached material science studies made on an electron microscope. On the same samples proposed a method of revealing the quality of cleaning with a luminescent method of control. Conclusions are made and the best variants of the luminescent method are determined.