Analysis Drip Irrigation Submain by Bhange Harshalkumar (3 results)

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Design of drip irrigation system is complex because it involves hydraulics of water supply through a network of close conduit therefore, development of an accurate and simple design method is important to over come the inherent defects of the existing methods. In this study a finite element model was developed to analyse the exiting drip irrigation system by generating the element stiffness matrix for each component. A computer programme was developed to comparing the simulated values of pressure and discharge with observed values. The test results showed close agreement between observed and predicted pressure and discharge for both pressure head and both type of drippers. It is concluded that pressure and discharge can be extracted easily by giving input data to the developed finite element model. The results also indicated that finite element model was capable of estimating pressure and discharge, hence the model can successfully be applied for effective planning and management of different crop. 104 pp. Englisch.…

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Bhange HarshalkumarMr Harshalkumar Namdeorao Bhange working as Assistant Professor, SWCE, CAET, DBSKKV, Dapoli, MS, India. He has vast experience in the field of watershed development, rainwater harvesting since last 13 yrs (Teaching.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Design of drip irrigation system is complex because it involves hydraulics of water supply through a network of close conduit therefore, development of an accurate and simple design method is important to over come the inherent defects of the existing methods. In this study a finite element model was developed to analyse the exiting drip irrigation system by generating the element stiffness matrix for each component. A computer programme was developed to comparing the simulated values of pressure and discharge with observed values. The test results showed close agreement between observed and predicted pressure and discharge for both pressure head and both type of drippers. It is concluded that pressure and discharge can be extracted easily by giving input data to the developed finite element model. The results also indicated that finite element model was capable of estimating pressure and discharge, hence the model can successfully be applied for effective planning and management of different crop.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 104 pp. Englisch.…