9780792339939 - Fatigue Under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling (15 results)

- Hardcover
Seller: Buchpark, Trebbin, , GermanyBuchpark
Contact seller5-star sellerCondition: Used - Fine
£ 18.65
£ 90.84 shippingShips from Germany to U.S.A.Quantity: 1 available
Condition: Sehr gut. Zustand: Sehr gut | Seiten: 524 | Sprache: Englisch | Produktart: Bücher | The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and b…y the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.

- Hardcover
Seller: Ria Christie Collections, Uxbridge, United KingdomRia Christie Collections
Contact seller5-star sellerCondition: New
£ 189.04
£ 11.98 shippingShips from United Kingdom to U.S.A.Quantity: Over 20 available
Condition: New. In.

Fatigue Under Thermal and Mechanical Loading : Mechanism, Mechanics and Modelling : Proceedings of the Symposium Held at Petten, the Netherlands, 22-24 May 1995
Bressers, J. (EDT); Remy, L. (EDT); Steen, M. (EDT); Valles, Jose Luis Canet (EDT)
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: New
£ 208.76
£ 1.98 shippingShips within U.S.A.Quantity: 15 available
Condition: New.

- Hardcover
Seller: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrelandKennys Bookshop and Art Galleries Ltd.
Contact seller5-star sellerCondition: New
£ 232.46
£ 9.08 shippingShips from Ireland to U.S.A.Quantity: 15 available
Condition: New. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 Editor(s): Bressers, J.; Remy, L. Num Pages: 520 pages, biography. BIC Classification: TGM. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 28. Weight in Grams: 901. . 1996. Hardback. . . . .

- Hardcover
Seller: Books Puddle, New York, NY, U.S.A.Books Puddle
Contact seller4-star sellerCondition: New
£ 242.61
£ 3.00 shippingShips within U.S.A.Quantity: 4 available
Condition: New. pp. 520.

Language: English
Published by Springer Netherlands, Springer Netherlands 1996
- Hardcover
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
Contact seller5-star sellerCondition: New
£ 198.81
£ 56.00 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se… de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.

- Hardcover
Seller: Mispah books, Redhill, SURRE, United KingdomMispah books
Contact seller4-star sellerCondition: Used - As new
£ 253.00
£ 25.00 shippingShips from United Kingdom to U.S.A.Quantity: 1 available
Hardcover. Condition: Like New. Like New. book.

- Hardcover
Seller: Kennys Bookstore, Olney, MD, U.S.A.Kennys Bookstore
Contact seller5-star sellerCondition: New
£ 284.63
£ 7.89 shippingShips within U.S.A.Quantity: 15 available
Condition: New. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 Editor(s): Bressers, J.; Remy, L. Num Pages: 520 pages, biography. BIC Classification: TGM. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 28. Weight in Grams: 901. . 1996. Hardback. . . . . Books ship from the US and Ir…eland.

Fatigue Under Thermal and Mechanical Loading : Mechanism, Mechanics and Modelling : Proceedings of the Symposium Held at Petten, the Netherlands, 22-24 May 1995
Bressers, J. (EDT); Remy, L. (EDT); Steen, M. (EDT); Valles, Jose Luis Canet (EDT)
- Hardcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contact seller5-star sellerCondition: Used - As new
£ 294.66
£ 1.98 shippingShips within U.S.A.Quantity: 15 available
Condition: As New. Unread book in perfect condition.

- Hardcover
- Print on Demand
Seller: moluna, Greven, , Germanymoluna
Contact seller5-star sellerCondition: New
£ 160.46
£ 42.38 shippingShips from Germany to U.S.A.Quantity: Over 20 available
Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 The International Symposium Fatigue under Thermal and Mechanical Loading , held at Petten (The Netherlands) on May 22-24, 1995, wa…s jointly organized by the Institute for.

- Hardcover
- Print on Demand
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , GermanyBuchWeltWeit Ludwig Meier e.K.
Contact seller5-star sellerCondition: New
£ 190.69
£ 19.90 shippingShips from Germany to U.S.A.Quantity: 2 available
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the… Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 524 pp. Englisch.

- Hardcover
- Print on Demand
Seller: preigu, Osnabrück, Germanypreigu
Contact seller5-star sellerCondition: New
£ 166.37
£ 60.56 shippingShips from Germany to U.S.A.Quantity: 5 available
Buch. Condition: Neu. Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling | L. Rémy (u. a.) | Buch | Einband - fest (Hardcover) | Englisch | 1996 | Springer Netherland | EAN 9780792339939 | Verantwortliche Person für die EU: Springer Netherlands, Haberstr. 7, 69126 Heidelberg, buchhandel-buch[at]spr…inger[dot]com | Anbieter: preigu Print on Demand.

Language: English
Published by Springer Netherlands, Springer Netherlands Apr 1996 1996
- Hardcover
- Print on Demand
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germanybuchversandmimpf2000
Contact seller5-star sellerCondition: New
£ 190.69
£ 51.91 shippingShips from Germany to U.S.A.Quantity: 1 available
Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Soc…iete Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 524 pp. Englisch.

- Hardcover
- Print on Demand
Seller: Majestic Books, Hounslow, , United KingdomMajestic Books
Contact seller4-star sellerCondition: New
£ 255.88
£ 6.50 shippingShips from United Kingdom to U.S.A.Quantity: 4 available
Condition: New. Print on Demand pp. 520 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

- Hardcover
- Print on Demand
Seller: Biblios, frankfurt am main, HESSE, GermanyBiblios
Contact seller4-star sellerCondition: New
£ 261.47
£ 8.61 shippingShips from Germany to U.S.A.Quantity: 4 available
Condition: New. PRINT ON DEMAND pp. 520.