Savithri G (13 results)

Soft cover. Condition: New. ISBN:9788177545906,208pp.

Hardcover. Condition: New. ISBN:9788177545890,208pp.

Hardcover. Condition: New. ISBN:9788193753729,304pp.

Hardcover. Condition: New. 1st Edition. Contents: 1. Conservation of biological diversity: a tool for women empowerment/J. Kamakshamma, L Sudhira and P. Nagajyothi. 2. Organic Agriculture for Women's Empowerment/G. Fareeda and M. Nagalakshmi Devamma. 3. Empowerment of Rural Women through ICT/K.S. Shanthi Sree, A. Suvarna Latha and Prof. K. Nagalakshmamma. 4. A Role of Women in Sustainable Organic Agriculture/Durga Prameela. G and M. Nagalakshmi Devamma. 5. Pharmaceutical Technology for Sustainable Development of Women/Prof. B. Sailaja. 6. Ancient Technology for the Health of a Modern Woman: The Ayurvedic Way/S. Gnana Prasuna, and B. Harinatha Chary. 7. Information and Communication Technology to Support Women Telecommuters/K. Usha Rani and K. Hemalatha. 8. An Overview of Sustainable Development of Women in Aquaculture and its Improvement of Economic Status/P. Naga Jyothi, K. Praveenkumar and J. Kamakshamma. 9. Social Media and Women Entrepreneurs/N. Rajani. 10. Tasar Silkworm Culture: A Tool for Tribal Women Empowerment and Poverty Alleviation/Sujatha kuntamalla, Sathish Janga and Anitha Jirra. 11. Gender Sensitive Technologies for Sustainable Development/P. Neeraja. 12. Women Empowerment through Apiculture/M. Nagalakshmi Devamma and G. Fareeda. 13. Women Empowerment through Government Policies/A. Suvarna Latha, K. S. Shanthi Sree and Prof. K. Nagalakshmamma. 14. Small Scale Industries: A Special Reference to Empowerment of Women Employment in Backward Areas of South India/L. Sudhira, J. Kamakshamma. 15. Vanya Sericulture: A Tool for Empowerment of Women/Prof. D. Bharathi. 16. Technology and Women Empowerment/A. Kusuma and Ms. G. Srivani. 17. Women in New Emerging Trends of Information Technology/Prof. S. Jyothi and P. Bhargavi. 18. Sericulture Technologies for Sustainable Empowerment of Rural Women/Prof. G. Savithri and Prof. P. Sujathamma. 19. Microbial Technology for Sustainable Development of Rural Women/Ch. M. Kumari Chitturi. Countries need to open up opportunities to bring more women to science and technology, thereby producing a critical mass of scientifically skilled women. The Governments and policy makers need to be drafted policies to empower women through education and employment especially in the fields of science and technology. Over the years Indian women have overcome the traditional mind-sets and have excelled in professions like teaching, medicine, engineering, information technology, biotechnology, nuclear science, space science and many such specialized fields in the domain of science and technology. Their contribution to socio-economic development as an employer and employee, getting recognized and honored in public, private sectors. Still the gender technology gap persists in a majority of developed and developing countries. Women are not having access to professional and income opportunities. In addition, we are missing out on the enormous potential that women represent because they are not participating in how the science and technology sectors are being designed and how they will affect the life of a country. This book on 'Technological Initiatives for Women Empowerment' is an attempt to understand the role of Science and Technology in empowering women, women's representation and their contribution to the field, Its impact on women and need for evolution of gender friendly technologies etc. …

Condition: New.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Taschenbuch. Condition: Neu. NICKEL TITANIUM ROTARY INSTRUMENTS | Savithri Devi G (u. a.) | Taschenbuch | Englisch | 2026 | LAP LAMBERT Academic Publishing | EAN 9786209539541 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Paperback. Condition: new. Paperback. The NiTi alloy was developed in the United States by William Buehler in 1963 and was named NiTiNOL, an acronym for nickel (Ni), titanium (Ti), and Naval Ordnance Laboratory (NOL). In dentistry, Andreasen and Morrow initially applied the NiTiNOL in orthodontics due to its low modulus of elasticity, shape memory effect and super flexibility. The low modulus of elasticity of the NiTi alloy would allow the production of more efficient instruments to prepare curved canals.NITI alloys used in the production of endodontic instruments have almost equiatomic ratios of nickel and titanium elements and contain three microstructural phases named austenite, martensite, and R-phase. The respective amount of each one of these phases will determine the mechanical properties of the alloy. The transformation of austenite into martensite (also called classic martensitic transformation) is caused by the ability of the alloy to modify its atomic arrangement. The alteration of its crystalline microstructure and transformation characteristics directly influence the mechanical properties of the alloy. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 152 pp. Englisch.

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The NiTi alloy was developed in the United States by William Buehler in 1963 and was named NiTiNOL, an acronym for nickel (Ni), titanium (Ti), and Naval Ordnance Laboratory (NOL). In dentistry, Andreasen and Morrow initially applied the NiTiNOL in orthodontics due to its low modulus of elasticity, shape memory effect and super flexibility. The low modulus of elasticity of the NiTi alloy would allow the production of more efficient instruments to prepare curved canals.NITI alloys used in the production of endodontic instruments have almost equiatomic ratios of nickel and titanium elements and contain three microstructural phases named austenite, martensite, and R-phase. The respective amount of each one of these phases will determine the mechanical properties of the alloy. The transformation of austenite into martensite (also called classic martensitic transformation) is caused by the ability of the alloy to modify its atomic arrangement. The alteration of its crystalline microstructure and transformation characteristics directly influence the mechanical properties of the alloy.…

Paperback. Condition: new. Paperback. The NiTi alloy was developed in the United States by William Buehler in 1963 and was named NiTiNOL, an acronym for nickel (Ni), titanium (Ti), and Naval Ordnance Laboratory (NOL). In dentistry, Andreasen and Morrow initially applied the NiTiNOL in orthodontics due to its low modulus of elasticity, shape memory effect and super flexibility. The low modulus of elasticity of the NiTi alloy would allow the production of more efficient instruments to prepare curved canals.NITI alloys used in the production of endodontic instruments have almost equiatomic ratios of nickel and titanium elements and contain three microstructural phases named austenite, martensite, and R-phase. The respective amount of each one of these phases will determine the mechanical properties of the alloy. The transformation of austenite into martensite (also called classic martensitic transformation) is caused by the ability of the alloy to modify its atomic arrangement. The alteration of its crystalline microstructure and transformation characteristics directly influence the mechanical properties of the alloy. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The NiTi alloy was developed in the United States by William Buehler in 1963 and was named NiTiNOL, an acronym for nickel (Ni), titanium (Ti), and Naval Ordnance Laboratory (NOL). In dentistry, Andreasen and Morrow initially applied the NiTiNOL in orthodontics due to its low modulus of elasticity, shape memory effect and super flexibility. The low modulus of elasticity of the NiTi alloy would allow the production of more efficient instruments to prepare curved canals.NITI alloys used in the production of endodontic instruments have almost equiatomic ratios of nickel and titanium elements and contain three microstructural phases named austenite, martensite, and R-phase. The respective amount of each one of these phases will determine the mechanical properties of the alloy. The transformation of austenite into martensite (also called classic martensitic transformation) is caused by the ability of the alloy to modify its atomic arrangement. The alteration of its crystalline microstructure and transformation characteristics directly influence the mechanical properties of the alloy.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 152 pp. Englisch.…