Principles of Paint Formulation
R. Woodbridge
Sold by BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
AbeBooks Seller since 11 January 2012
New - Soft cover
Condition: New
Ships from Germany to U.S.A.
Quantity: 2 available
Add to basketSold by BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
AbeBooks Seller since 11 January 2012
Condition: New
Quantity: 2 available
Add to basketThis item is printed on demand - it takes 3-4 days longer - Neuware -1 Getting the basics right.- 1.1 Introduction.- 1.2 Availability of raw material data.- 1.3 Clarifying the objective.- 1.4 Identifying formulating constraints.- 1.5 Use of standard formulation format.- 1.5.1 Costing laboratory formulations.- 1.5.2 Manufacturing formulations.- 1.6 Use of test schedules.- 1.7 Understanding the costing system.- 1.7.1 Raw material costs.- 1.7.2 Manufacturing costs.- 1.7.3 Container and filling costs.- 1.8 Know the competition.- 2 Establishing a structured development programme.- 2.1 Introduction.- 2.2 Raw material substitution.- 2.3 Cost reduction.- 2.4 Product improvement.- 2.5 Matching the competition.- 2.6 New products.- 2.6.1 Project 1.- 2.6.2 Project 2.- 2.7 New classes of raw material.- 2.8 New technology.- 3 Raw materials.- 3.1 Introduction.- 3.2 Resins.- 3.2.1 General.- 3.2.2 Types of resins available.- 3.2.3 Selection of resins.- 3.3 Pigments.- 3.3.1 General.- 3.3.2 White pigments (titanium dioxide).- 3.3.3 Coloured pigments.- 3.3.4 Extenders.- 3.3.5 Corrosion inhibiting pigments.- 3.4 Solvents, thinners and diluents.- 3.4.1 General.- 3.4.2 Solvents in air dry finishes.- 3.4.3 Solvents in cross-linked and stoving finishes.- 3.4.4 Solvents in aqueous finishes.- 3.5 Rheology modifiers.- 3.5.1 General.- 3.5.2 Solvent-thinned products.- 3.5.3 Water-thinned products.- 3.6 Additives.- 3.6.1 General.- 3.6.2 Dispersing/wetting agents.- 3.6.3 Driers.- 3.6.4 Preservatives/biocides.- 3.6.5 Insecticides.- 3.6.6 Can corrosion inhibitors.- 3.6.7 Flash rust inhibitors.- 3.6.8 UV absorbers.- 3.6.9 Reodorants.- 3.6.10 Anti-skin.- 3.6.11 Anti-flood/float.- 3.6.12 Anti-foam.- 3.6.13 Anti-gassing.- 3.6.14 Anti-static.- 3.6.15 Anti-freeze.- 4 Volume relationships.- 4.1 Introduction.- 4.2 The CPVC concept.- 4.3 Establishing the CPVC.- 4.3.1 The CPVC cell method.- 4.3.2 The oil absorption method.- 4.3.3 Effect of latex vehicles on CPVC.- 4.3.4 Other means for CPVC determination.- 4.4 The relationship of PVC to CPVC.- 4.5 The porosity concept.- 4.5.1 Effect of porosity on hiding power.- 4.6 Use in formulation.- 4.6.1 Spacing extenders.- 4.6.2 Modifying a standard product.- 4.6.3 Latex paints.- 4.6.4 Flat latex paints.- 4.6.5 Effect of relative BPI.- 4.6.6 Matching a competitive sample.- 4.7 Summary.- References.- 5 Dry hiding¿an alternative to titanium dioxide.- 5.1 Introduction.- 5.2 Available technologies.- 5.3 Relevance of packing considerations.- 5.4 Pittment.- 5.5 Spindrift.- 5.6 Plastic pigment.- 5.7 Opaque polymer.- 6 Computer techniques.- 6.1 Introduction.- 6.2 Computerised process control.- 6.3 Colour matching.- 6.4 Formulation and costing programmes.- 6.4.1 Raw material file.- 6.4.2 Formulation file.- 6.4.3 Calculation file.- 6.4.4 Reformulation programmes.- 6.5 Experimental designs.- 6.5.1 Randomisation.- 6.5.2 Randomised block.- 6.5.3 Latin square.- 6.5.4 Factorial experiments.- 6.5.5 Fractional factorial design.- 6.5.6 Box ¿ Behnken.- 6.6 Experimental design with mixtures.- 6.6.1 Three component mixture design.- 6.6.2 Four component mixture design.- 6.6.3 Simplex mixture screening design.- 6.7 Theoretical approach to formulation.- References.- 7 Design for bulk manufacture.- 7.1 Introduction.- 7.1.1 The basic problem.- 7.1.2 Conditions for dispersion.- 7.1.3 Particulate solids.- 7.1.4 The continuous phase.- 7.2 Stages of bulk manufacture.- 7.2.1 Introduction.- 7.2.2 Stable base formulation.- 7.2.3 Initial dispersion formulation.- 7.2.4 Let-down stages.- 7.2.5 Completion.- 7.3 Types of dispersion equipment.- 7.3.1 Introduction.- 7.3.2 Ball mills.- 7.3.3 Attritors.- 7.3.4 Batch bead mills.- 7.3.5 High shear stress mixers.- 7.3.6 Low shear stress mixers.- 7.3.7 Other types of mixers.- 7.3.8 Continuous mills.- 7.3.9 Sand mills.- 7.4 Formulating for optimum wetting and dispersion.- 7.4.1 Introduction.- 7.4.2 Ball mills.- 7.4.3 Attritors.- 7.4.4 Batch bead mills.- 7.4.5 High shear stress mixers.- 7.4.6 Low shear stress mixers.- 7.4.7 Oth.
Seller Inventory # 9781461366324
"About this title" may belong to another edition of this title.
Allgemeine Geschäftsbedingungen mit Kundeninformationen
Inhaltsverzeichnis
Geltungsbereich
Vertragsschluss
Widerrufsrecht
Preise und Zahlungsbedingungen
Liefer- und Versandbedingungen
Eigentumsvorbehalt
Mängelhaftung
Anwendbares Recht
Gerichtsstand
Alternative Streitbeilegung
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
Der Versand ins Ausland findet IMMER mit DHL statt. Auch nach Österreich verschicken wir nur mit DHL! Daher Standardversand == Luftpost!
| Order quantity | 5 to 15 business days | 5 to 15 business days |
|---|---|---|
| First item | £ 19.84 | £ 19.84 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.