Paperback. All packaging engineers and technologists who want to ensure thatthey give their customers the highest quality, most cost-effectiveproducts should know that the paradigm has shifted. It has shiftedaway from the MIL-STDs and other government standards and testprocedures that don't cost-effectively address potential failuremechanisms or the manufacturing processes of the product. It hasshifted decisively towards tackling the root causes of failure andthe appropriate implementation of cost-effective process controls,qualityscreens, and tests. This book's groundbreaking, science-based approach to developingqualification and quality assurance programs helps engineers reacha new level of reliability in today's high-performancemicroelectronics. It does this with powerful. * Techniques for identifying and modeling failure mechanismsearlier in the design cycle, breaking the need to rely on fielddata * Physics-of-failure product reliability assessment methods thatcan be proactively implemented throughout the design andmanufacture of the product * Process controls that decrease variabilities in the end productand reduce end-of-line screening and testing A wide range of microelectronic package and interconnectconfigurations for both single-and multi-chip modules is examined,including chip and wire-bonds, tape-automated (TAB), flip-TAB,flip-chip bonds, high-density interconnects, chip-on-board designs(COB), MCM, 3-D stack, and many more. The remaining packageelements, such as die attachment, case and lid, leads, and lid andlead seals are also discussed in detail. The product of a distinguished team of authors and editors, thisbook's guidelines for avoiding potential high-risk manufacturingand qualification problems, as well as for implementing ongoingquality assurance, are sure to prove invaluable to both studentsand practicing professionals. For the professional engineer involved in the design andmanufacture of products containing electronic components, here is acomprehensive handbook to the theory and methods surrounding theassembly of microelectronic and electronic components. The bookfocuses on computers and consumer electronic products with internalsubsystems that reflect mechanical design constraints, costlimitations, and aesthetic and ergonomic concerns. Taking a totalsystem approach to packaging, the book systematically examines:basic chip and computer architecture; design and layout;interassembly and interconnections; cooling scheme; materialsselection, including ceramics, glasses, and metals; stress,vibration, and acoustics; and manufacturing and assemblytechnology. 1994 (0-471-53299-1) 800 pp. INTEGRATED CIRCUIT, HYBRID, AND MULTICHIP MODULE PACKAGE DESIGNGUIDELINES: A Focus on Reliability --Michael Pecht This comprehensive guide features a uniquely organized time-phasedapproach to design, development, qualification, manufacture, andin-service management. It provides step-by-step instructions on howto define realistic system requirements, define the system usageenvironment, identify potential failure modes, characterizematerials and processes by the key control label factors, and useexperiment, step-stress, and accelerated methods to ensure optimumdesign before production begins. Topics covered include: detaileddesign guidelines for substrate.wire and wire, tape automated,and flip-chip bonding.element attachment and case, lead, lead andlid seals--incorporating dimensional and geometric configurationsof package elements, manufacturing and assembly conditions,materials selection, and loading conditions. 1993 (0-471-59446-6)454 pp. All packaging engineers and technologists who want to ensure that they give their customers the highest quality, most cost--effective products should know that the paradigm has shifted. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Seller Inventory # 9780471594369

Contact seller

Report this item

Bibliographic Details

Title: Quality Conformance and Qualification of Microelectronic Packages and Interconnects (Paperback)
Publisher: John Wiley & Sons Inc, New York
Publication Date: 1995
Language: English
ISBN 10: 0471594369
ISBN 13: 9780471594369
Binding: Paperback
Edition: 1st Edition
Condition: new

About this title

Synopsis

All packaging engineers and technologists who want to ensure thatthey give their customers the highest quality, most cost-effectiveproducts should know that the paradigm has shifted. It has shiftedaway from the MIL-STDs and other government standards and testprocedures that don't cost-effectively address potential failuremechanisms or the manufacturing processes of the product. It hasshifted decisively towards tackling the root causes of failure andthe appropriate implementation of cost-effective process controls,qualityscreens, and tests.

This book's groundbreaking, science-based approach to developingqualification and quality assurance programs helps engineers reacha new level of reliability in today's high-performancemicroelectronics. It does this with powerful...
* Techniques for identifying and modeling failure mechanismsearlier in the design cycle, breaking the need to rely on fielddata
* Physics-of-failure product reliability assessment methods thatcan be proactively implemented throughout the design andmanufacture of the product
* Process controls that decrease variabilities in the end productand reduce end-of-line screening and testing

A wide range of microelectronic package and interconnectconfigurations for both single-and multi-chip modules is examined,including chip and wire-bonds, tape-automated (TAB), flip-TAB,flip-chip bonds, high-density interconnects, chip-on-board designs(COB), MCM, 3-D stack, and many more. The remaining packageelements, such as die attachment, case and lid, leads, and lid andlead seals are also discussed in detail.

The product of a distinguished team of authors and editors, thisbook's guidelines for avoiding potential high-risk manufacturingand qualification problems, as well as for implementing ongoingquality assurance, are sure to prove invaluable to both studentsand practicing professionals.

For the professional engineer involved in the design andmanufacture of products containing electronic components, here is acomprehensive handbook to the theory and methods surrounding theassembly of microelectronic and electronic components. The bookfocuses on computers and consumer electronic products with internalsubsystems that reflect mechanical design constraints, costlimitations, and aesthetic and ergonomic concerns. Taking a totalsystem approach to packaging, the book systematically examines:basic chip and computer architecture; design and layout;interassembly and interconnections; cooling scheme; materialsselection, including ceramics, glasses, and metals; stress,vibration, and acoustics; and manufacturing and assemblytechnology. 1994 (0-471-53299-1) 800 pp.

INTEGRATED CIRCUIT, HYBRID, AND MULTICHIP MODULE PACKAGE DESIGNGUIDELINES: A Focus on Reliability --Michael Pecht

This comprehensive guide features a uniquely organized time-phasedapproach to design, development, qualification, manufacture, andin-service management. It provides step-by-step instructions on howto define realistic system requirements, define the system usageenvironment, identify potential failure modes, characterizematerials and processes by the key control label factors, and useexperiment, step-stress, and accelerated methods to ensure optimumdesign before production begins. Topics covered include: detaileddesign guidelines for substrate...wire and wire, tape automated,and flip-chip bonding...element attachment and case, lead, lead andlid seals--incorporating dimensional and geometric configurationsof package elements, manufacturing and assembly conditions,materials selection, and loading conditions. 1993 (0-471-59446-6)454 pp.

About the Author

DR. MICHAEL G. PECHT is a tenured faculty member with a joint appointment in Systems Research and Mechanical Engineering, and the Director of the CALCE Electronic Packaging Research Center at the University of Maryland. He has an MS in electrical engineering and an MS and PhD in engineering mechanics from the University of Wisconsin. He is a Professional Engineer and an IEEE Fellow. He serves on the board of advisors for various companies and was a Westinghouse Professor. He is the chief editor of the IEEE Transactions on Reliability, on the board of advisors for IEEE Spectrum, and a section editor for the Society of Automotive Engineering.

DR. ABHIJIT DASGUPTA is a tenured faculty member with the CALCE Electronic Packaging Research Center at the University of Maryland.

DR. JOHN W. EVANS is a program manager of the Electronic Packaging Program for NASA Headquarters in Washington, D.C.

JILLIAN Y. EVANS is an aerospace engineer at the NASA Goddard Space Flight Center Facility in Greenbelt, Maryland.

"About this title" may belong to another edition of this title.

Store Description

Visit Seller's Storefront

Seller's business information

APOLLO ONLINE CORP.
605 Geddes Street, Wilmington, DE, 19805, U.S.A.

Sale & Shipping Terms

Terms of Sale

We guarantee the condition of every book as it�s described on the Abebooks web sites. If you�ve changed
your mind about a book that you�ve ordered, please use the Ask bookseller a question link to contact us
and we�ll respond within 2 business days.
Books ship from California and Michigan.

Right of cancellation

If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

INFORMATION REGARDING THE RIGHT OF CANCELLATION

Statutory Right to cancel

You have the right to cancel this contract within 14 days without giving any reason.

The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.

To exercise the right to cancel, you must inform us, Grand Eagle Retail, 26C Trolley Square, 19806, Wilmington, Delaware, U.S.A., 1 (302) 261-2674, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.

To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.

Effects of cancellation

If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to us or Grand Eagle Retail, Grand Eagle Retail c/o Kable Product Services, 4275 Thunderbird Lane, 45014-45, Fairfield, Ohio, U.S.A., 1 (302) 261-2674, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of cancellation

The right of cancellation does not apply to:

the delivery of newspapers, journals or magazines with the exception of subscription contracts; and
the supply of digital content (including ebooks) which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not cancel it once delivery had started.

Model withdrawal form

(complete and return this form only if you wish to withdraw from the contract)

To: (Grand Eagle Retail, 26C Trolley Square, 19806, Wilmington, Delaware, U.S.A., 1 (302) 261-2674)

I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),

Ordered on (*)/received on (*)

Name of consumer(s)

Address of consumer(s)

Signature of consumer(s) (only if this form is notified on paper)

Date

* Delete as appropriate.

Shipping Terms

Orders usually ship within 2 business days. All books within the US ship free of charge. Delivery is 4-14 business days anywhere in the United States.

Books ship from California and Michigan.

If your book order is heavy or oversized, we may contact you to let you know extra shipping is required.

Shipping rates within U.S.A.

Shipping rates within U.S.A.
Order quantity	6 to 16 business days	6 to 14 business days
First item	� 0.00	� 0.00

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.