Robots Assembly (30 results)

Hardcover. Condition: Good. No Jacket. 1st Edition. w/markings, pocket, and/or bookplate, wear/soil. Size: 8vo. Ex-Library.

Condition: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. May contain underlining and/or highlighting. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Hardcover. Condition: Fine. Dust Jacket Condition: fine. First American Edition. Octavo, 211 pages, cloth Current and future challenges in robotics and automation. Extensively illustrated.

Condition: Used: Good. ex library so some stamps etc. good overall condition.sent next working day from the u/k 1ST CLASS 0.0.

Dust Jacket Condition: dj. First Edition. First Edition. owner signature. Near Fine book in a Near Fine dustjacket.

Hardcover. Condition: New. Dust Jacket Condition: New. Kogan Page, London, 1985. Original Cloth. 1st Edition 211 pages illustrated with dj A BRAND NEW BOOK UNUSED . Full refund if not satisfied. 24 hour despatch via Insured/Signed for.

Hardcover. Condition: Glossy pictorial boards. First American Edition. New York: Halstead Press / John Wiley & Sons, 1986. No underlining. No highlighting. No margin notes. Mild EX-LIBRARY copy, stamped "WITHDRAWN" on rear endpaper. No library markings on the spine or covers. Clean, square, and tight. Pages are fresh and crisp, probably never read. Fine condition. Copiously illustrated with line drawings, tables, and diagrams. Appendix: Walking-Beam Operation. Bibliographical references. Index. First American Edition. Hardcover. Glossy pictorial boards/No Dust Jacket, as issued. 8vo. xi, 176pp.

Condition: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.

Hardback. Condition: Fine. Dust Jacket Condition: Fine. First edition. 1st 1985. Fine condition in a fine dustwrapper. Examining when robots should be used for assembly tasks in preference to manual operation or hard automation. Black boards, gilt title to spine. B/w photos. 211 pages including index. Packaged with care and promptly dispatched!

Hard Cover. Condition: Very Good. Dust Jacket Condition: Very Good in Sleeve. First Edition. 211pp. 8.8 inches. Black cloth, gilt titles, vg. Internally, e-university lib. bookplate, etc, else contents about as new. In vg jacket in sleeve, lightly rubbed at spine extremities. Illustrated with diagrams and b/w photographs. Brief historical outline of assembly by robot, criteria for use, characteristics, product and process design, predictable material presentation systems and the options of component manufacture at the point of assembly, implications of simple vs sophisticated robots and grippers, sensing and vision, automated inspection, etc. 480g (Engineering, Mechanical, Robot, Automation, Assembly, Industry) Size: 8vo - over 7¾" - 9¾" tall.

Condition: New. In.

Condition: New. pp. 216.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - In the western world, economic logic (and need) has replaced the indentured craftsman by computer controlled machining centres within manufacturing industries. The same rationale is the incentive behind the development of robots that are technically capable of performing assembly tasks, and the inevitable, albeit slow, adoption of these robots by the manufacturing industries. This book is based upon the author's knowledge and first hand experience of the manufacturing industries of North America and the UK in general, and the UK's robotics industry in particular. The general and specific implications of per forming an assembly task robotically are discussed, the majority of which are not specific to anyone sector of the manufactur ing industry, nor to any particular size of product being manu factured. This book should be of interest to those who are interested in or involved with the use of robots for assembly. The 'veils of mystic' and misinformation on robots and the assembly process are subsequently removed.

Taschenbuch. Condition: Neu. Assembly with Robots | Tony. Owen | Taschenbuch | 212 S. | Englisch | 2012 | Springer | EAN 9781468415025 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Condition: New. In.

Condition: New. In.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: Fine. RUA17400419.

Paperback. Condition: Brand New. reprint edition. 242 pages. 9.26x6.11x0.70 inches. In Stock.

Taschenbuch. Condition: Neu. Flexible Assembly Systems | Assembly by Robots and Computerized Integrated Systems | A. E. Owen | Taschenbuch | xi | Englisch | 2013 | Springer | EAN 9781489904959 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - It has become clear in recent years from such major forums as the various international conferences on flexible manufacruring systems (FMSs) that the computer-controlled and -integrated 'factory of the furure' is now being considered as a commercially viable and technically achievable goal. To date, most attention has been given to the design, development, and evalu ation of flexible machining systems. Now, with the essential support of increasing numbers of industrial examples, the general concepts, technical requirements, and cost-effectiveness of responsive, computer-integrated, flexible machining systems are fast becoming established knowledge. There is, of course, much still to be done in the development of modular com puter hardware and software, and the scope for cost-effective developments in pro gramming systems, workpiece handling, and quality control will ensure that contin uing development will occur over the next decade. However, international attention is now increasingly rurning toward the flexible computer control of the assembly process as the next logical step in progressive factory automation. It is here at this very early stage that Tony Owen has bravely set out to encompass the future field of flexible assembly systems (FASs) in his own distinctive, wide-ranging style.

Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - It has become clear in recent years from such major forums as the various international conferences on flexible manufacruring systems (FMSs) that the computer-controlled and -integrated 'factory of the furure' is now being considered as a commercially viable and technically achievable goal. To date, most attention has been given to the design, development, and evalu ation of flexible machining systems. Now, with the essential support of increasing numbers of industrial examples, the general concepts, technical requirements, and cost-effectiveness of responsive, computer-integrated, flexible machining systems are fast becoming established knowledge. There is, of course, much still to be done in the development of modular com puter hardware and software, and the scope for cost-effective developments in pro gramming systems, workpiece handling, and quality control will ensure that contin uing development will occur over the next decade. However, international attention is now increasingly rurning toward the flexible computer control of the assembly process as the next logical step in progressive factory automation. It is here at this very early stage that Tony Owen has bravely set out to encompass the future field of flexible assembly systems (FASs) in his own distinctive, wide-ranging style.

Hardcover. Condition: Very Good. Very Good. book.

Paperback. Condition: Like New. Like New. book.

Hardcover. Condition: Good. In Russian. Popov, Georgy Vasilyevich. Application of industrial robots in assembly. Leningrad: LDNTP, 1978 All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7635774.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In the western world, economic logic (and need) has replaced the indentured craftsman by computer controlled machining centres within manufacturing industries. The same rationale is the incentive behind the development of robots that are technically capable of performing assembly tasks, and the inevitable, albeit slow, adoption of these robots by the manufacturing industries. This book is based upon the author's knowledge and first hand experience of the manufacturing industries of North America and the UK in general, and the UK's robotics industry in particular. The general and specific implications of per forming an assembly task robotically are discussed, the majority of which are not specific to anyone sector of the manufactur ing industry, nor to any particular size of product being manu factured. This book should be of interest to those who are interested in or involved with the use of robots for assembly. The 'veils of mystic' and misinformation on robots and the assembly process are subsequently removed. 216 pp. Englisch.

Condition: New. Print on Demand pp. 216 22:B&W 5.5 x 8.5 in or 216 x 140 mm (Demy 8vo) Perfect Bound on White w/Gloss Lam.

Condition: New. PRINT ON DEMAND pp. 216.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. In the western world, economic logic (and need) has replaced the indentured craftsman by computer controlled machining centres within manufacturing industries. The same rationale is the incentive behind the development of robots that are technically capable.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the western world, economic logic (and need) has replaced the indentured craftsman by computer controlled machining centres within manufacturing industries. The same rationale is the incentive behind the development of robots that are technically capable of performing assembly tasks, and the inevitable, albeit slow, adoption of these robots by the manufacturing industries. This book is based upon the author's knowledge and first hand experience of the manufacturing industries of North America and the UK in general, and the UK's robotics industry in particular. The general and specific implications of per forming an assembly task robotically are discussed, the majority of which are not specific to anyone sector of the manufactur ing industry, nor to any particular size of product being manu factured. This book should be of interest to those who are interested in or involved with the use of robots for assembly. The 'veils of mystic' and misinformation on robots and the assembly process are subsequently removed.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 216 pp. Englisch.