Programming Cnc Machines Student by Evans Ken (17 results)

paperback. Condition: Very Good. Student Workbook for Programming of CNC Machines This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .

paperback. Condition: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Condition: New.

Paperback. Condition: new. Paperback. Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4thedition. It is filled with many practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Together with its companion text, this workbook can be used as a complete CNC training program; or, it can be used on its own by students or professionals to verify that they have the basic skills needed to write a CNC program.Ken Evans has held a variety of machining and related jobs throughout his career; and is currently a CNC Programmer at a prominent aerospace company. Ken was a Machine Tool Technology instructor for 20 years at Davis Applied Technology College in Kaysville, Utah, where he taught a variety of courses throughout the machining curriculum, including Mastercam CAD/CAM. In addition, he has trained other educators from around the region on how to set-up, program, and operate their CNC machines; and has been a Training & Applications Specialist for a local machine tool distributor. Unit 1: CNC BasicsUnit 2: Setup & OperationUnit 3: CNC Turning Center ProgrammingUnit 4: CNC Machining Center ProgrammingUnit 5: Answer Key Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4th edition. It is filled with practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condition: New.

Paperback. Condition: New. Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4thedition. It is filled with many practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Together with its companion text, this workbook can be used as a complete CNC training program; or, it can be used on its own by students or professionals to verify that they have the basic skills needed to write a CNC program.Ken Evans has held a variety of machining and related jobs throughout his career; and is currently a CNC Programmer at a prominent aerospace company. Ken was a Machine Tool Technology instructor for 20 years at Davis Applied Technology College in Kaysville, Utah, where he taught a variety of courses throughout the machining curriculum, including Mastercam CAD/CAM. In addition, he has trained other educators from around the region on how to set-up, program, and operate their CNC machines; and has been a Training and Applications Specialist for a local machine tool distributor.   Unit 1: CNC BasicsUnit 2: Setup and OperationUnit 3: CNC Turning Center ProgrammingUnit 4: CNC Machining Center ProgrammingUnit 5: Answer Key.

Condition: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condition: New. In.

Paperback / softback. Condition: New. New copy - Usually dispatched within 4 working days.

Paperback. Condition: New. Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4thedition. It is filled with many practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Together with its companion text, this workbook can be used as a complete CNC training program; or, it can be used on its own by students or professionals to verify that they have the basic skills needed to write a CNC program.Ken Evans has held a variety of machining and related jobs throughout his career; and is currently a CNC Programmer at a prominent aerospace company. Ken was a Machine Tool Technology instructor for 20 years at Davis Applied Technology College in Kaysville, Utah, where he taught a variety of courses throughout the machining curriculum, including Mastercam CAD/CAM. In addition, he has trained other educators from around the region on how to set-up, program, and operate their CNC machines; and has been a Training and Applications Specialist for a local machine tool distributor.   Unit 1: CNC BasicsUnit 2: Setup and OperationUnit 3: CNC Turning Center ProgrammingUnit 4: CNC Machining Center ProgrammingUnit 5: Answer Key.

Paperback. Condition: Brand New. 4th csm stu edition. 157 pages. 10.00x8.00x0.50 inches. In Stock.

Condition: New.

Condition: New.

Condition: New. &Uumlber den AutorKen Evans has had an illustrious career working in aerospace and manufacturing as a Prototype Lab Manager, CNC Programmer, Sales Engineer, Instructor, Quality Control Inspector and Machinist Tool- & Die- and Mol.

Paperback. Condition: New. Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4thedition. It is filled with many practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Together with its companion text, this workbook can be used as a complete CNC training program; or, it can be used on its own by students or professionals to verify that they have the basic skills needed to write a CNC program.Ken Evans has held a variety of machining and related jobs throughout his career; and is currently a CNC Programmer at a prominent aerospace company. Ken was a Machine Tool Technology instructor for 20 years at Davis Applied Technology College in Kaysville, Utah, where he taught a variety of courses throughout the machining curriculum, including Mastercam CAD/CAM. In addition, he has trained other educators from around the region on how to set-up, program, and operate their CNC machines; and has been a Training and Applications Specialist for a local machine tool distributor.   Unit 1: CNC BasicsUnit 2: Setup and OperationUnit 3: CNC Turning Center ProgrammingUnit 4: CNC Machining Center ProgrammingUnit 5: Answer Key.

Paperback. Condition: New. Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4thedition. It is filled with many practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Together with its companion text, this workbook can be used as a complete CNC training program; or, it can be used on its own by students or professionals to verify that they have the basic skills needed to write a CNC program.Ken Evans has held a variety of machining and related jobs throughout his career; and is currently a CNC Programmer at a prominent aerospace company. Ken was a Machine Tool Technology instructor for 20 years at Davis Applied Technology College in Kaysville, Utah, where he taught a variety of courses throughout the machining curriculum, including Mastercam CAD/CAM. In addition, he has trained other educators from around the region on how to set-up, program, and operate their CNC machines; and has been a Training and Applications Specialist for a local machine tool distributor.   Unit 1: CNC BasicsUnit 2: Setup and OperationUnit 3: CNC Turning Center ProgrammingUnit 4: CNC Machining Center ProgrammingUnit 5: Answer Key.

Taschenbuch. Condition: Neu. Neuware - Written by an author with many years of experience teaching CNC machining, this workbook is the perfect complement to Programming of CNC Machines, 4thedition. It is filled with many practical exercises and is one of the few workbooks available that tests users through the application of programming functions commonly used in CNC programming. Together with its companion text, this workbook can be used as a complete CNC training program; or, it can be used on its own by students or professionals to verify that they have the basic skills needed to write a CNC program.