Optimum Use Oriented Spur by Ibrahim Mohammad (7 results)

Condition: New.

Taschenbuch. Condition: Neu. Neuware -This book used Physical and two dimensional hydrodynamic models to simulate the flow pattern around a series of groins. As a sufficient solution aiming at reduce the erosion in the main right bank opposite to the diversion channel at the new Naga-Hammadi barrage. The simulation is focused on defining the critical discharge during barrage construction, study of velocity in the longitudinal and transverse directions. In addition the working length produced from groins implementation, that could be investigated with the aid of the model resulted velocity vectors. Moreover, the fluctuation in water level, and morphological changes in bed (e.g. length and depth of scour holes) were also investigated. A finite element mesh is designed for measuring purposes. The measurements covered about 180 grid points interpreted to twelve lines along stream crossed by 15 transverse cross sections at right angles to the lines from. Three effective parameters were examined; the contraction ratio, the angle of orientation and the intermediate spacing.Books on Demand GmbH, Überseering 33, 22297 Hamburg 336 pp. Englisch.

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ibrahim MohammadMohammad Ibrahim: Professor associate, Civil Engineering department, Shoubra faculty of engineering, Banha University. Master of Science in Hydraulics, Shoubra Faculty of Engineering, El-Zagazig University, MsC, in Hy.

Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book used Physical and two dimensional hydrodynamic models to simulate the flow pattern around a series of groins. As a sufficient solution aiming at reduce the erosion in the main right bank opposite to the diversion channel at the new Naga-Hammadi barrage. The simulation is focused on defining the critical discharge during barrage construction, study of velocity in the longitudinal and transverse directions. In addition the working length produced from groins implementation, that could be investigated with the aid of the model resulted velocity vectors. Moreover, the fluctuation in water level, and morphological changes in bed (e.g. length and depth of scour holes) were also investigated. A finite element mesh is designed for measuring purposes. The measurements covered about 180 grid points interpreted to twelve lines along stream crossed by 15 transverse cross sections at right angles to the lines from. Three effective parameters were examined; the contraction ratio, the angle of orientation and the intermediate spacing. 336 pp. Englisch.

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This book used Physical and two dimensional hydrodynamic models to simulate the flow pattern around a series of groins. As a sufficient solution aiming at reduce the erosion in the main right bank opposite to the diversion channel at the new Naga-Hammadi barrage. The simulation is focused on defining the critical discharge during barrage construction, study of velocity in the longitudinal and transverse directions. In addition the working length produced from groins implementation, that could be investigated with the aid of the model resulted velocity vectors. Moreover, the fluctuation in water level, and morphological changes in bed (e.g. length and depth of scour holes) were also investigated. A finite element mesh is designed for measuring purposes. The measurements covered about 180 grid points interpreted to twelve lines along stream crossed by 15 transverse cross sections at right angles to the lines from. Three effective parameters were examined; the contraction ratio, the angle of orientation and the intermediate spacing.

Condition: New. Print on Demand.

Condition: New. PRINT ON DEMAND.