Fracture Mechanics Technology (48 results)

Hardcover. Condition: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Condition: Good. No Jacket. Good, ex-library book with associated ex-library flaws, light soiling to red cloth, wear to cloth at corners, slightly bumped corners, and small stains on page tops that have bled slightly into a handful of pages. Text is unmarked.

Hardcover. Condition: Near Fine. No Jacket. Former owner name on exterior top page edge, otherwise a clean unmarked book. NO WRITING NOR HIGHLIGHTING. NOT a former library book.

Trade Paperback. Condition: Near Fine. Dust Jacket Condition: wraps. 14th International Conf. Lyon, Fr. 1997. This is a near fine, unmarked paperback copy, yellow spine.

Paperback. Condition: Very Good. No Dust Jacket. SOFTCOVER. Sticker to spine and inside cover, stamp to page block. Text is clean, tight and bright. Ex-Library.

Condition: New.

Hardcover. Condition: Good.

Condition: New. pp. 696.

Hardcover. Condition: Good (ex-library). No Dust Jacket. Hardcover. 178 pages. *** PUBLISHING DETAILS: ASTM, USA, 1985. *** CONDITION: This book is in good (ex-library) condition but dust jacket is not included. More specifically: End pages marked with library stamps, spine unmarked, in all other respects in very good condition throughout. Edges of boards have superficial wear. *** Quantity Available: 1. Category: Science & Technology; ISBN: 0803104499. ISBN/EAN: 9780803104495. Inventory No: 26080118.…

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The International Conference on Fracture Mechanics Technology Applied to Material Evaluation and Structure Design was held in Melbourne, Australia, from August 10 to 13, 1982. It was sponsored jointly by the Australian Fracture Group and Institute of Fracture and Solid Mechanics at Lehigh University. Pro fessor G. C. Sih of Lehigh University, Drs. N. E. Ryan and R. Jones of Aeronau tical Research Laboratories served as Co-Chairmen. They initiated the organiza tion of this international event to provide an opportunity for the practitioners, engineers and interested individuals to present and discuss recent advances in the evaluation of material and structure damage originating from defects or cracks. Particular emphases were placed on applying the fracture mechanics tech nology for assessing interactions between material properties, design and opera tional requirements. It is timely to hold such a Conference in Australia as she embarks on technology extensive industries where safeguarding structures from pre mature and unexpected failure is essential from both the technical and economical points. view The application of system-type approach to failure control owes much of its success to fracture mechanics. It is now generally accepted that the discipline, when properly implemented, provides a sound engineering basis for accounting in teractions between material properties, design, fabrication, inspection and op erational requirements. The approach offers effective solutions for design and maintenance of large-scale energy generation plants, mining machineries, oil ex ploration and retrieval equipments, land, sea and air transport vehicles.…

Condition: New. Satisfaction Guaranteed or your money back.

Condition: As New. Unread book in perfect condition.

Condition: New.

Original Cloth. 1st Edition. 24 x 16 cm., xxx, 737 pp. Vol. 1 of 2 paginated consecutively. Proceedings of an international conference on fracture mechanics and technology, held at the Convention Centre, Hong Kong, March 21-25, 1977. A collection of papers by various authors arranged in sections: Fatigue fracture; Fatigue and creep; Microstructure effect; Composite materials; Nonmetals and composites; Material and structure analysis; Material testing; Photoelasticity and bioengineering; Environmental effects. Illustrated with 10 b/w photos of participants. The book is covered in red cloth with white lettering on the spine and front. CONDITION. Near fine. A very clean tight copy. Library marks and labels on spine and front end papers. Ex-Library. …

Original Cloth. 1st Edition. 24 x 16 cm., pp. xiii, 741 - 1615. Vol. 2 of 2 paginated consecutively. Proceedings of an international conference on fracture mechanics and technology, held at the Convention Centre, Hong Kong, March 21-25, 1977. A collection of papers by various authors arranged in sections: Discussion of trends of nuclear power in Asia; Plasticity; Fracture control and COD; Modeling and fracture analysis; Stress analysis; Dynamic fracture; Finite element; Nondestructive testing. The book is covered in red cloth with white lettering on the spine and front. CONDITION. Near fine. A very clean tight copy. Library marks and labels on spine and free end paper. Ex-Library.…

Hardcover. Condition: New. Hardcover. Pages Number: 606 Language: English. Publisher: Pub. Date:2009-10-01. This book is the seventh volume of the proceedings for the symposium series on Fracture Mechanicsan annual conference devoted to the exchange of information among the universities research institutions and industry sectors in China and abroad. FM2009 is held in Chengdu Sichuan Provincefrom October 16 to October 20 2009. Contents : PrefaceFrom the editorsNon-Newtonian mechanics for small bodies G. C. SihLife predi.…

Hardcover. Condition: New. Hardcover. Pages Number: 606 Language: English. Publisher: Pub. Date:2009-10-01. This book is the seventh volume of the proceedings for the symposium series on Fracture Mechanicsan annual conference devoted to the exchange of information among the universities research institutions and industry sectors in China and abroad. FM2009 is held in Chengdu Sichuan Provincefrom October 16 to October 20 2009. Contents : PrefaceFrom the editorsNon-Newtonian mechanics for small bodies G. C. SihLife predi.…

Paperback. Condition: Neu. Neu Neuware, auf Lager - Section I Inclusions and Void Growth.- A critical assessment of plastic hole-growth mechanisms of ductile fracture.- Particles and crack growth in aluminum alloys.- Observations of cavity nucleation, growth and coalescence in dimpled rupture.- Propagation of cleavage microcracks in triaxial stress fields.- Section II Energy Criteria and Path Independent Integrals.- The calculation of energy release rates.- Surface layer energy and strain energy density for a blunted crack or notch.- Development of the nonlinear energy method for determination of fracture toughness values.- The importance of stable crack extension in linear and non-linear fracture mechanics.- Path independent integrals in fracture mechanics and their relation to variational principles.- Section III Fatigue Crack Propagation.- The influence of fracture toughness on sub-critical flaw growth.- Experimentally observed plasticity effects on crack closure and subcritical crack growth.- Fatigue crack growth under variable-amplitude loading.- Modeling of the phenomena of fracture in solids.- Load and environment interactions in fatigue crack growth.- Section IV Dynamics and Arrest.- An analysis of dynamic crack propagation and arrest for a material having a crack speed dependent fracture toughness.- Temperature dependence of rapid crack propagation and arrest in A517F steel.- Application of the strain energy density fracture criterion to dynamic crack problems.- Criteria for steady state crack extension in gas pipelines.- Elastodynamic stress intensity factors for a bifurcating crack.- Some aspects of dynamic crack propagation: a review and some generalisations.- Section V Structural Analysis.- Fracture mechanics and ships.- Analysis of energy quantities for fracture under biaxial stresses.- An improved technique for residual strength prediction ¿ a modified crack growth resistance approach.- On the prediction of catastrophic failures in pressurized vessels.- The effects of fastener flexibility and stiffener geometry on the stress intensity in stiffened cracked sheet.- Important aspects of crack growth prediction for aircraft structural applications.- Section VI Stress Analysis and Analytical Modeling.- A critical survey of models that account for non-linearity of material behaviour at a crack tip.- Fracture of composite materials.- Recent developments in fracture of filamentary composites.- A critical review of anisotropic fracture mechanics.- Stress intensity factors for elliptical cracks.- Section VII Fracture Experiments and Testings.- Present status on the evaluation criteria of fracture toughness for structural steels and their welded joints in Japan.- The use of small, pre-cracked specimens for quality control purposes.- Slow crack growth and failure prediction of brittle materials subjected to a transient thermal stress.- Experimental methods for the determination of stress intensity factors under various loading conditions.- Written Discussions.- Plastic strip model for thin shells.- Elastic-plastic fracture mechanics.- Stress intensity factor determination for polymers.- Antiplane steady state crack motion in a perfectly plastic material.- On brittle crack propagation and arrest.- Design considerations in fracture mechanics.- List of Participants.- Author¿s Index. …

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: As New. Unread book in perfect condition.

Paperback. Condition: Brand New. 664 pages. 9.70x6.70x1.50 inches. In Stock.

Condition: Good. Contains light staining. 1971. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.…

Original Cloth. 1st Edition. Proceedings of an International Conference on Fracture Mechanics Technology Applied to Material Evaluation and Structure Design, held at the University of Melbourne, Melbourne, Australia, August 10-13, 1982. 24 x15 cm., xx, 671 pp. A collection of papers by various authors arranged in sections: General lectures; Microstructures; Stress and failure analysis; Fracture and material testing; Analytical and experimental modelling; Mixed mode fracture; Fatigue crack growth; Environmental effects; Composites and nonmetals. The book is illustrated with b/w photos and with diagrams. It is covered in green cloth with black lettering on the spine and front. CONDITION. VG+/ no dj. A very clean tight copy. Library marks on spine, free end paper and verso title page. Ex-Library.…

Condition: gut. Transactions of the 9th International Conference on Structural Mechanics in Reactor Technology/Lusanne, 17-21 August 1987. Structural Mechanics in Reactor Technology, Vol. G: Fracture Mechanics and NDE. In deutscher Sprache. pages.

Paperback. Condition: Brand New. 460 pages. 9.00x6.30x1.04 inches. In Stock.

hardcover. Condition: Good. Good. Dust Jacket NOT present. CD WILL BE MISSING. . SHIPS FROM MULTIPLE LOCATIONS. book.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Hardcover. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

hardcover. Condition: Good. Good. Dust Jacket NOT present. CD WILL BE MISSING. . SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: New.