Engineering Workshop Practice by Arthur W Judge (29 results)

Condition: Good. No edition remarks. 346 pages. No dust jacket. Black cloth with gilt lettering. Pages are moderately tanned with light foxing. Notable cracking to gutters, however binding remains firm. Notable thumb-marking present. Boards have light shelf-wear with corner bumping. Mild scratching and marking to boards. Mild crushing to spine ends. Book has forward lean. Boards are mildly warped.

Hardcover. Condition: Fair. No Jacket. Fair, hardcover. Reasonably clean, bright and tight. Some marks and age tanning but otherwise in fair condition. Hinge loose. Corners bumped. No dustjacket, black cloth boards with gilt lettering to spine. 352 pages.

Condition: Good. No Edition Remarks. 289 pages. Dust jacket over brown cloth with gilt lettering. Volume II. Black and white photographic plates and illustrations. Light foxing and tanning to pages and plates. More prominent to text block edges, pastedowns and free endpapers. Light cracking and staining to gutters, slightly exposing netting; some looseness to binding but pages remain attached. Boards have minor corner bumping and edgewear with mild scuffing overall. Spine has light sunning with soft crushing to ends. Lettering remains bright and clear. Book has a slight forward lean. Unclipped dust jacket with minor rubbing, chipping and tearing to edges. Moderate tanning and scuffing overall.

Condition: Good. 9999. No Edition Remarks. 312 pages. Dust jacket over brown cloth with gilt lettering. Volume III. Black and white photographic plates and illustrations. Light thumb marking, foxing and tanning to pages and plates. More prominent to text block edges, pastedowns and free endpapers. Light cracking and staining to gutters, slightly exposing netting; some looseness to binding but pages remain attached. Boards have minor corner bumping and edgewear with mild scuffing overall. Spine has light tanning with soft crushing to ends. Lettering remains bright and clear. Book has a slight forward lean. Unclipped dust jacket with minor rubbing, chipping and tearing to edges. Moderate tanning and scuffing overall.

Hardcover. Condition: Good. No Jacket. Reprint . Signed by the previous owner on the front inner board. Heavy book may require extra postage unless posted within South Africa. Reprint, October 1956. Publication of 604 pages. There is gilt on the spine of the book. The boards are a little shelf rubbed. On the inner board and front free end paper page there are old tape residue marks and a scuffed mark. Internally the pages are clean and complete. The text is legible. The binding is excellent. GK. Our orders are shipped using tracked courier delivery services.

Hardcover. Condition: Very Good. No Jacket. 3rd Edition. Black boards, front blind stamped and gilt text to spine. Contents very clean bright and tight. Nice copy. Please contact us for pictures and/or further details - only too pleased to help!

Hardcover. Condition: Good. Good boards have light wear. Content has light toning. Some foxing to end papers. No DJ.

Hardcover. Condition: Acceptable. Photograph available on request.

Hardcover. Condition: Good. Volume 111 - FIRST EDITION with clipped & worn dust jacket - rare and collectable - will send out 1 st class post.

Black Cloth. Condition: VERY GOOD ( AVERAGE). No Jacket. Black & White Illustrations and Photographs (illustrator). 2nd Reprint of Third Edition. Boards a little worn. Pages have brown edging to them. FEEL FREE TO E-MAIL FOR PHOTOGRAPHS AND FURTHER DETAILS. FROM A DEALER WHO TELLS YOU WHO THEY ARE AND WHAT THEIR TELEPHONE AND ADDRESS CONTACT DETAILS ARE! Not Inscribed or Signed.

Hardcover. Condition: Good. No Jacket. THE CAXTONS PUBLISHING COMPANY.Vol III only undated hardback.Internally fine, clean throughout. Boards have wear to spine and edges. Shipped next working day from the U/K Language: eng Language: eng Language: eng.

Hardcover. Condition: Very Good. No Jacket. volume 3 with index. shelf wear on the boards . minor foxing and markings. some old tape residue. text remains clear and presentable. heavy, may require extra postage. [SK]. Our orders are shipped using tracked courier delivery services.

Black Cloth. Condition: VERY GOOD ( AVERAGE). No Jacket. Black & White Illustrations and Photographs (illustrator). 2nd Reprint of Third Edition. Boards a little worn. Pages have brown edging to them. FEEL FREE TO E-MAIL FOR PHOTOGRAPHS AND FURTHER DETAILS. FROM A DEALER WHO TELLS YOU WHO THEY ARE AND WHAT THEIR TELEPHONE AND ADDRESS CONTACT DETAILS ARE! Not Inscribed or Signed.

Hardcover. Condition: Fair. CAXTONS Hardback. Good condition, has some marks to a few pages rest is clean and bright. Posted next working day Language: eng Language: eng Language: eng.

Large 8vo. Brown leather-cloth gilt. A good set. pp. xi, 293; ix, 289; ix, 312. With plates, diagrams and photographs throughout.

Hardcover. Condition: Good. Photograph available on request.

Condition: Used: Good. Occasion - Bon Etat - Jauni - Engineering workshop practice volume III (1906) - Grand Format.

Condition: Used: Good. Occasion - Bon Etat - Jauni - Engineering workshop practice volume II (1906) - Grand Format.

Condition: Used: Good. Occasion - Bon Etat - Jauni - Engineering workshop practice volume I (1906) - Grand Format.

Hardcover. Condition: Very Good. Black boards with gilt titles to spine and green speckles on edges. A tight, bright and clean copy with no inscriptions. Features black and white illustrations, photographs and diagrams throughout. 416pp + index. (18.5x24.5cm). Please contact us for any more information.

Hardcover. Condition: Good. 1948. A used copy, with some rubbing and fraying along the outer edges and corners, particularly the ends of the spine. Spine has split and been re-glued along the rear edge. However the contents are complete and well-presented throughout with no significant marks or crease throughout. Why do most sellers not describe their actual item? Buy with confidence, support a genuine Independent Bricks & Mortar Real Bookshop and help to preserve our High Streets as interesting places to shop. We are Maynard & Bradley CAMBO & PBFA (now lapsed) members here in Leicester City Centre, UK Size: 210 x 260 mm. 344. Item Type: Book. Quantity Available: 1. Shipped Weight: 1-2 kilos. Category: Engineering, Industrial, Trade; England; 1940s; Inventory No: 46390.

Hard Cover. Condition: Very Good. No Jacket. New and Revised. black imitation grained leather Size: 4to - over 9¾" - 12" tall.

Couverture rigide. Condition: bon. RO60105765: Non daté. In-8. Relié. Etat d'usage, Tâchée, Dos fané, Quelques rousseurs. 312 pages. Illustré de très nombreux schémas et photos en noir et blanc dans et hors texte. . . . Classification Dewey : 420-Langue anglaise. Anglo-saxon.

2nd edition hardback in original cloth Nice copy octavo 604pp., text ills., diags., index, Lovely crisp copy in bright black boards.

Hardcover. Condition: Very Good. CAXTON 1940 Very Good/ Complete 3 volume Set. Simulate leather in dark-cordova with gold lettering and lining on spine. Tight unmarked pages illustrated with photos detailed drawings tables and graphs. no date, date is approximate. Vol I. xii+293 pages; Vol II x+289 pages; Vol III x+312 pages with index = 926 pages LARGE HEAVY ITEM 9.25 Pounds. Set Size: 10 x 7 3/4 x 3 7/8 inches. No Exp.

Cloth. Condition: Very Good Indeed. Not Stated (illustrator). An early revised edition of this comprehensive practical work on engineering equipment, machinery and processes. The third edition, fourth impression of this three-volume work in the publisher's original cloth bindings. Loosely inserted to Volume III is a four-page pamphlet concerning this work. Volume I contains eight plates. Volume II contains thirteen plates. Volume III contains five plates. Collated, complete. A new revised edition of this practical work on engineering tools, machines, materials and equipment, as well as engineering manufacturing processes and machine operations, by Arthur W. Judge, assisted by other experts. Profusely illustrated with illustrations and diagrams throughout. Index to the rear of Volume III. In the publisher's original cloth bindings. Externally smart, with bright gilt to the spines. Rear hinges to Volume I and II are slightly strained but holding firm. Front hinge to Volume II is strained but is holding reasonably firm. Internally, firmly bound. Pages are bright and clean. Very Good Indeed. book.

Hardcover. Condition: Good. A practical work on engineering workshop tools, machines, materials and equipment, engineering manufacturing processes and machining operations. Internal pages are slightly discoloured with age, and with some minor foxing to outer edges, but content is clean and tightly bound. Note: This volume is heavy, approx 4kg. Arrangements can be negotiated for the most cost effective method of delivery. Vol 1 293p pp. Black cloth & leather boards, binding and spine, Embossed pattern with gilt lettering on spine.

3 VOL SET, super octavo, black textured buckram boards, gilt lettering & rule to spines, blind stamp illus to front boards, green speckling to page edges, mixed pagination, illus/photos, VG+ (sl soiling to boards, sl tanning & foxing to page edges & eps, prev. owner's name in ink to tops of ffeps).

Condition: Used - Good. Good hardbacks. Reprint. Undated - probably early 1940s. Tidy copies in tight bindings; slight wear to boards & spines. This is a heavy set of (about 5kgs packed); additional postage may be required.