9780727741721 - Designers' Guide to Eurocode 3: Design of Steel Buildings Second Edition: En 1993-1-1, -1-3 and -1-8 by Gardner, Leroy; Nethercot Obe, David; Gulvanessian Cbe, Haig... (16 results)

Hardcover. Condition: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Hardcover. Condition: Very Good. Designers' Guide to Eurocode 3: Design of Steel Buildings, 2nd edition (Designers Guides to Eurocodes) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping.

Hardcover. Condition: new. New Copy. Customer Service Guaranteed.

Hardback. Condition: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind and the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.

HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000.

Condition: new.

Condition: New. pp. 160.

Hardback. Condition: New. New copy - Usually dispatched within 4 working days.

Hardcover. Condition: Brand New. 2nd edition. 161 pages. 12.00x8.50x0.50 inches. In Stock.

Condition: New. 2011. 2nd edition. Hardcover. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Series: Designers' Guides to Eurocodes. Num Pages: 172 pages, 80. BIC Classification: TNC. Category: (P) Professional & Vocational. Dimension: 303 x 214 x 14. Weight in Grams: 784. . . . . .

Hardback. Condition: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind and the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.

Condition: New. 2011. 2nd edition. Hardcover. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Series: Designers' Guides to Eurocodes. Num Pages: 172 pages, 80. BIC Classification: TNC. Category: (P) Professional & Vocational. Dimension: 303 x 214 x 14. Weight in Grams: 784. . . . . . Books ship from the US and Ireland.

Gebunden. Condition: New. Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available.&Uumlber den AutorDr Leroy Gardner is a lecturer in Structural Engi.

Hardback. Condition: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind and the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.

Hardback. Condition: New. 2nd Edition. This series of Designers' Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind and the objectives of the codes. All of the individual guides work in conjunction with the Designers' Guide to EN1990: Basis of Structural Design.Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available. Throughout, this book concentrates on the most commonly encountered aspects of structural steel design, with an emphasis on the situation in buildings. Much of its content is therefore devoted to the provisions of Part 1.1 General rules and rules for buildings of EN 1993: Design of steel structures, however, this is supplemented by material on joints (Part 1.8), cold-formed design (Part 1.3), and loading (EN 1990 and EN 1991). For each of the principal aspects covered, the book provides background to the structural behaviour, explanation of the codified treatment including departure from existing practice (BS 5950) and numerous worked examples.The second edition of this popular guide has been fully updated for revisions to the code and the UK National Annex for EN 1993-1-1 (UK NA to BS EN 1993-1-1); this guide should serve as the primary point of reference for designing steel structures to Eurocode 3.This guide is essential reading forcivil and structural engineerscode-drafting committeesclientsstructural-design studentspublic authorities.

Buch. Condition: Neu. Neuware - Eurocode 3 covers many forms of steel construction and provides the most comprehensive and up-to-date set of design guidance currently available.