Dixit Prakash Mahadeo (21 results)

Condition: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condition: New. pp. 608.

Condition: New. pp. 608 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Condition: New. pp. 608.

Condition: New. In.

Condition: Sehr gut. Zustand: Sehr gut | Seiten: 608 | Sprache: Englisch | Produktart: Bücher | The use of computational techniques is increasing day by day in the manufacturing sector. Process modeling and optimization with the help of computers can reduce expensive and time consuming experiments for manufacturing good quality products. Metal forming and machining are two prominent manufacturing processes. Both of these processes involve large deformation of elasto-plastic materials due to applied loads. In metal forming, the material is plastically deformed without causing fracture. On the other hand, in machining, the material is deformed till fracture, in order to remove material in the form of chips. To understand the physics of metal forming and machining processes, one needs to understand the kinematics of large deformation (dependence of deformation and its rate on displacement) as well as the constitutive behavior of elasto-plastic materials (dependence of internal forces on deformation and its rate). Once the physics is understood, these phenomena have to be converted to mathematical relations in the form of differential equations. The interaction of the work-piece with the tools/dies and other surroundings also needs to be expressed in a mathematical form (known as the boundary and initial conditions). In this book, the first four chapters essentially discuss the physics of metal forming and machining processes. The physical behavior of the work-piece during the processes is modeled in the form of differential equations and boundary and initial conditions.

Condition: New. In.

Hardcover. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condition: Neu. Modeling of Metal Forming and Machining Processes | by Finite Element and Soft Computing Methods | Prakash Mahadeo Dixit (u. a.) | Taschenbuch | xvi | Englisch | 2010 | Springer | EAN 9781849967495 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Condition: New. pp. 608.

Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The use of computational techniques is increasing day by day in the manufacturing sector. Process modeling and optimization with the help of computers can reduce expensive and time consuming experiments for manufacturing good quality products. Metal forming and machining are two prominent manufacturing processes. Both of these processes involve large deformation of elasto-plastic materials due to applied loads. In metal forming, the material is plastically deformed without causing fracture. On the other hand, in machining, the material is deformed till fracture, in order to remove material in the form of chips. To understand the physics of metal forming and machining processes, one needs to understand the kinematics of large deformation (dependence of deformation and its rate on displacement) as well as the constitutive behavior of elasto-plastic materials (dependence of internal forces on deformation and its rate). Once the physics is understood, these phenomena have to be converted to mathematical relations in the form of differential equations. The interaction of the work-piece with the tools/dies and other surroundings also needs to be expressed in a mathematical form (known as the boundary and initial conditions). In this book, the first four chapters essentially discuss the physics of metal forming and machining processes. The physical behavior of the work-piece during the processes is modeled in the form of differential equations and boundary and initial conditions.

Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condition: new. Questo è un articolo print on demand.

Condition: new. Questo è un articolo print on demand.

Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Uses original mathematic approach in design and manufacturing processes Provides algorithms to help readers develop codes Written by authorities in the subject Prof. P. M. Dixit has been actively working in the area of metal forming,.

Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Uses original mathematic approach in design and manufacturing processes Provides algorithms to help readers develop codes Written by authorities in the subject Prof. P. M. Dixit has been actively working in the area of metal forming,.

Buch. Condition: Neu. Modeling of Metal Forming and Machining Processes | by Finite Element and Soft Computing Methods | Prakash Mahadeo Dixit (u. a.) | Buch | xvi | Englisch | 2008 | Springer | EAN 9781848001886 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.

Buch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The use of computational techniques is increasing day by day in the manufacturing sector. Process modeling and optimization with the help of computers can reduce expensive and time consuming experiments for manufacturing good quality products. Metal forming and machining are two prominent manufacturing processes. Both of these processes involve large deformation of elasto-plastic materials due to applied loads. In metal forming, the material is plastically deformed without causing fracture. On the other hand, in machining, the material is deformed till fracture, in order to remove material in the form of chips. To understand the physics of metal forming and machining processes, one needs to understand the kinematics of large deformation (dependence of deformation and its rate on displacement) as well as the constitutive behavior of elasto-plastic materials (dependence of internal forces on deformation and its rate). Once the physics is understood, these phenomena have to be converted to mathematical relations in the form of differential equations. The interaction of the work-piece with the tools/dies and other surroundings also needs to be expressed in a mathematical form (known as the boundary and initial conditions). In this book, the first four chapters essentially discuss the physics of metal forming and machining processes. The physical behavior of the work-piece during the processes is modeled in the form of differential equations and boundary and initial conditions.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 608 pp. Englisch.

Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The use of computational techniques is increasing day by day in the manufacturing sector. Process modeling and optimization with the help of computers can reduce expensive and time consuming experiments for manufacturing good quality products. Metal forming and machining are two prominent manufacturing processes. Both of these processes involve large deformation of elasto-plastic materials due to applied loads. In metal forming, the material is plastically deformed without causing fracture. On the other hand, in machining, the material is deformed till fracture, in order to remove material in the form of chips. To understand the physics of metal forming and machining processes, one needs to understand the kinematics of large deformation (dependence of deformation and its rate on displacement) as well as the constitutive behavior of elasto-plastic materials (dependence of internal forces on deformation and its rate). Once the physics is understood, these phenomena have to be converted to mathematical relations in the form of differential equations. The interaction of the work-piece with the tools/dies and other surroundings also needs to be expressed in a mathematical form (known as the boundary and initial conditions). In this book, the first four chapters essentially discuss the physics of metal forming and machining processes. The physical behavior of the work-piece during the processes is modeled in the form of differential equations and boundary and initial conditions.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 608 pp. Englisch.

Condition: New. Print on Demand pp. 608 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Condition: New. PRINT ON DEMAND pp. 608.