Titanium Science and Technology
H. Burte
Sold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
New - Soft cover
Condition: New
Ships from Germany to U.S.A.
Quantity: 1 available
Add to basketSold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
Condition: New
Quantity: 1 available
Add to basketDruck auf Anfrage Neuware - Printed after ordering - Introductory Papers.- Introductory Remarks.- Keynote Address.- Banquet Address.- Current Uses and Future Possibilities, Including Economics and Materials Policy.- Critical Review.- Manufacturing Exercise Involved in the Redesign of the Hawker Siddeley Trident (Tri-Jet) Fuselage.- B-1 Cost/Weight Trade Methodology.- Design and Development Support for Critical Helicopter Applications in Ti-6A1-4V Alloy.- Flat Rolled Beta Titanium Alloys for Airframe Application.- Applications of the High Strength Alloy Ti-4A1-4Mo-2Sn-0.5Si in European Aircraft Projects.- Titanium! The Bridge to Composites.- Titanium Castings for Marine Propellers.- Titanium Tubing and Fittings for Deep Submergence Hydraulic Systems.- Some Technical Considerations on the Use of Titanium Condenser Tubing in Public Utility Power Generation Turbines.- Titanium Corrosion in Distillation Columns.- The Role of Titanium in Anodizing and Electroplating.- Recent Development in the Application of Titanium for Motorcars.- Winning and Refining.- Critical Review.- Murso Process for Producing Rutile Substitute.- Reduction of Ilmenite and Ilmenite Ores.- Methods of Titanium Powders Production.- The Interaction of Titanium with Refractory Oxides.- Potential Extractive Processes for Titanium Scrap Reclamation.- Consolidation, Primary and Secondary Fabrication.- Critical Review.- The Effect of the Rate of Filling Moulds on the Solidification of Titanium-Alloy Ingots.- Durarc¿ Process for Melting and Casting Titanium.- Some New Results about Casting of Titanium in the Electron Beam Melting Furnace.- Study of Residual Stresses in Cast Titanium Alloys.- Titanium Powder Metallurgy By Decomposition Sintering of the Hydride.- Titanium P/M Preforms, Parts and Composites.- Hot Isostatic Pressing of Titanium 6A1-4V.- Lubrication of Titanium Alloys under Conditions of Bulk Plastic Deformation.- The Influence of Process Variables on the Pressure Requirements for the Extrusion of Titanium Alloy Rods.- Titanium Precision Forgings.- Manufacturing Method and Mechanical Properties of Large Annular Forgings of Two-Phase Titanium Alloy.- Influence of Hot Working on the Properties of the Ti 6A1 4V Alloy with Special Regard to Heavy Sections.- The Manufacturing of Aircraft-Quality Hydraulic Tubing with the Ti-3A1-8V-6Cr-4Mo-4Zr Alloy.- Procedures and Precautions in Machining Titanium Alloys.- Smelting of Primary Ingots and Their Remelting in Plasma-Arc Furnaces with Cooled Molds.- Joining, Quality, Assurance, and Inspection.- Critical Review.- Metallurgical and Technological Features of Titanium Alloy Welding When Using Fluxes.- Microstructure Control in Welds of the Ti-6A1-6V-2Sn Alloy.- Factors Affecting the Ductility and Microstructure of Ti-6a1-6v-2sn Titanium Alloy Weldments.- Electron Beam Welding of Ti-6A1-6V-2Sn Plate.- Weld Optimisation and Fatigue Tests on Low Voltage Electron Beam Welded 2in (51mm) Thick Ti-6A1-4V Alloy.- Some Fatigue Properties of Welds in two Titanium Sheet Alloys.- Pressure Requirements for Diffusion Bonding Titanium.- Fatigue Behavior of Diffusion Bonded Ti-6A1-4V Having Very Small Defects.- Correlation of Diffusion Bonded Ti-6A1-4V Properties with Acoustic Emission, Pulse-Echo and Fractographic Data.- Failure Experience with and Failure Anticipation in Titanium Components.- Effects of Ti-6A1-4V Alloy Metallurgical Structures on Ultrasonic Response Characteristics.- The Effects of Stress on the Detection of Fatigue Cracks by Ultrasonic Technique.- Ultrasonic Inspection of Titanium Airframe Components.- Non-Destructive Inspection of Titanium Jet Engine Disks.- Measurement by X-Ray Diffraction of Macro-Stresses and Micro-Stresses in Titanium and a Titanium Alloy.- Nondestructive Detection of Hydrides and Alpha-Case in Titanium Alloys.
Seller Inventory # 9781475713480
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes...
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to AHA-BUCH GmbH, Einbeck, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.
| Order quantity | 30 to 40 business days | 7 to 14 business days |
|---|---|---|
| First item | £ 58.09 | £ 66.71 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.