Sustainable Water Management and Irrigation Systems
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketGlobally, different regions are facing severe water shortages. Population growth, changing consumer behavior and climate change seriously affect freshwater availability. Much of the water used for conventional irrigation infiltrates or evaporates and is therefore unusable. Thus, innovative irrigation systems must be developed to exploit largely unused, non-conventional water resources. Additionally, low-cost solutions should be used, with natural and regionally available materials (Low Technology, Low Energy, Low Budget, Easy to Use).
The present edited volume aims at: (i) making available holistic approaches to sustainable water and natural resources management systems; (ii) presenting evaluation results of new micro-irrigation technologies, tested in different international contexts; (iii) contributing to effectively combating the negative impacts of climate change on water availability, agriculture and food security; and (iv) providing implications for policymakers, entrepreneurs and researchers interested in water management issues and sustainable development goals (SDGs).
João Carlos Correia Leitão is an Associate Professor with habilitation in Technological Change and Entrepreneurship, and the Director of the UBIExecutive, Business School at the University of Beira Interior (UBI), Portugal. He further is a research fellow at the NECE Research Center for Business Sciences at UBI, and an Associate Researcher at the Instituto de Ciências Sociais (ICS), University of Lisbon, Portugal. Leitão is an invited scholar at the Università Degli Studi di Bergamo, Italy. He is a prolific author and a series editor of the Springer book series Studies in Entrepreneurship, Structural Change, and Industrial Dynamics. Leitão is also an editorial board member of several international journals.
Wael Khairy is a senior academician and researcher engineer. Has a blend of academic, managerial, strategic, technical, communication and operational experiences developed over a career spanning about 30 years. Conducted extensive academic and research work, focused experience on water science, such as surface water hydrology, river engineering, water resources planning, management, and development, and watershed management uses numerical modeling, earth observation, and statistical hydrology. Contributed positively and constructively to community development and environmental sustainability. Published various technical papers and chapter books in prestigious and renowned journal the areas of integrated watershed modeling, drainage water reuse, wastewater treatment technologies, monitoring and evaluation, water quality assessment, pollution control, climate change, and environmental management.
Dina Pereira is the Executive Director of UBImedical, Incubator of University of Beira Interior (UBI), Portugal, and Researcher at CEGIST – Centro de Estudos de Gestão | CEGIST – Centre for Management Studies, Instituto Superior Técnico – Universidade de Lisboa, in the fields of innovation and entrepreneurship. She is COO and Co-Founder of NeuroSoV, a startup that developed a drug candidate to slow down the progression of Parkinson Disease and is further working on other innovative therapies for neurodegenerative diseases and dementias.
Jelena Zascerinska is a scientific assistant and experienced project manager at Hochschule Wismar, Germany. Also, Dr. Zascerinska is a leading researcher at Centre for Education and Innovation Research, Latvia. She is an expert of EU programmes (Horizon 2020, Horizon Europe, COST, EUREKA, Eurostars, etc.) and National Research Agencies (Latvia, Poland, Slovakia). She has authored and co-authored about 300 scientific publications. She is active in peer reviewing in several research journals. Dr. Zascerinska is Latvia Top 100 Scientists and Latvia Top 3 Scientists in Education.
Pedro Dinis Gaspar is an Associate Professor with habilitation in Mechanical Engineering, leads the Department of Electromechanical Engineering at the University of Beira Interior, Portugal. He is a researcher at Centre for Mechanics and Aerospace Science and Technologies (CMAST), coordinator of Laboratory of Innovation and Technologies for Sustainability (LITecS) and collaborates with the collaborative laboratory Food4Sustainability. His work focuses on energy efficiency, sustainability, and automation/robotics in agriculture, contributing to numerous international and national R&D projects. He has authored over 180 publications in books, book chapters, international journals, and conference proceedings and co-authored six patents. He has edited several international journals and books.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
In order to exercise your revocation right, you must inform us (Moluna GmbH, Münsterstr. 105, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.
The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
To Moluna GmbH, Engberdingdamm 27, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date
(*) Cross out the incorrect option.
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | £ 42.46 | £ 42.46 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.