Spindles: 27 (Workshop Practice Series)

Harprit Sandhu

ISBN 10: 1854861492 / ISBN 13: 9781854861498

Published by Fox Chapel Publishers International, United Kingdom, 1998

About this Item

If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Seller Inventory # GOR002732465

Bibliographic Details

• Title: Spindles: 27 (Workshop Practice Series)
• Publisher: Fox Chapel Publishers International, United Kingdom
• Publication Date: 1998
• Language: English
• ISBN 10: 1854861492
• ISBN 13: 9781854861498
• Binding: Paperback
• Condition: Very Good
• Weight: 209 grams

About this title

Synopsis

If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards.

About the Author

Harprit Singh Sandhu, BSME, MSCerE, is an American engineer and the founder of Rhino Robots Inc., where he was the chief designer of the 'Rhino' series of robots. In his spare time he is a journeyman designer, machinist & woodworker, whose interest in clock making led him to design & build the spindles described in the book.