The expansion of unconventional petroleum resources in the recent decade and the rapid development of computational technology have provided the opportunity to develop and apply 3D numerical modeling technology to simulate the hydraulic fracturing of shale and tight sand formations. This book presents 3D numerical modeling technologies for hydraulic fracturing developed in recent years, and introduces solutions to various 3D geomechanical problems related to hydraulic fracturing. In the solution processes of the case studies included in the book, fully coupled multi-physics modeling has been adopted, along with innovative computational techniques, such as submodeling.
In practice, hydraulic fracturing is an essential project component in shale gas/oil development and tight sand oil, and provides an essential measure in the process of drilling cuttings reinjection (CRI). It is also an essential measure for widened mud weight window (MWW) when drilling through naturally fractured formations; the process of hydraulic plugging is a typical application of hydraulic fracturing. 3D modeling and numerical analysis of hydraulic fracturing is essential for the successful development of tight oil/gas formations: it provides accurate solutions for optimized stage intervals in a multistage fracking job. It also provides optimized well-spacing for the design of zipper-frac wells.
Numerical estimation of casing integrity under stimulation injection in the hydraulic fracturing process is one of major concerns in the successful development of unconventional resources. This topic is also investigated numerically in this book. Numerical solutions to several other typical geomechanics problems related to hydraulic fracturing, such as fluid migration caused by fault reactivation and seismic activities, are also presented.
This book can be used as a reference textbook to petroleum, geotechnical and geothermal engineers, to senior undergraduate, graduate and postgraduate students, and to geologists, hydrogeologists, geophysicists and applied mathematicians working in this field. This book is also a synthetic compendium of both the fundamentals and some of the most advanced aspects of hydraulic fracturing technology.

About the Author

Xinpu Shen is a Senior Advisor at Guoyang Technology and Services, and formerly a Senior Advisor at Halliburton Consulting.
He received his PhD degree in Engineering Mechanics in 1994 from Tsinghua University, Beijing, China. He was lecturer and associate professor in Tsinghua University from 1993 to 1999. Since May 2001, he was a professor in Engineering Mechanics in Shenyang University of Technology, China. From 1997 to 2004, he worked as post-doctoral research associate in several European institutions, including Politecnico di Milano, Italy and the University of Sheffield, UK, etc. He worked as consultant of geomechanics for Knowledge Systems Inc Houston since 2005 and until it was acquired by Halliburton in 2008. He has been coordinator to 4 projects supported by the National Natural Science Foundation of China since 2005. He is inventor (co-inventor) to 10 patents and author (coauthor) to 7 books and 98 related papers among which 30 can be downloaded from OnePetrol.com.

William Standifird currently serves as a Director - Global Technical Practices at Halliburton. In this role he is charged with the invention, development and deployment of innovative technologies that support safe and efficient well construction for petroleum assets. William began his career with Schlumberger as a Drilling Services Engineer where he specialized in the application of petroleum geomechanics to deepwater drilling operations. He subsequently joined Knowledge Systems Inc. and rapidly built a global petroleum geomechanics practice which was acquired by Halliburton in 2008. William has over 20 peer reviewed publications, a Performed by Schlumberger Silver Medal and a Hart’s Meritorious Engineering Award. He holds undergraduate degrees in electronics engineering, management science and earned a Master of Business Administration from the University of Houston System.

"About this title" may belong to another edition of this title.

Store Description

Online Handel nur mit Neub�chern

Visit Seller's Storefront

Seller's business information

Moluna GmbH
Engberdingdamm 27, Greven, 48268, Germany

Sale & Shipping Terms

Terms of Sale

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...

More Information

Right of withdrawal

If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

Information regarding the right of withdrawal

Statutory right to withdraw

You have the right to withdraw from this contract within 14 days without giving any reason.

The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.

To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.

To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.

Effects of withdrawal

If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to moluna, Greven, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of withdrawal

The right of withdrawal does not apply to:

The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.

Shipping Terms

II. Kundeninformationen

Identit�t des Verk�ufers

Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de

Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.

Informationen zum Zustandekommen des Vertrages

Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturm�glichkeiten erfolgen nach Ma�gabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Gesch�ftsbedingungen (Teil I.).

Vertragssprache, Vertragstextspeicherung

3.1. Vertragssprache ist deutsch .

3.2. Der vollst�ndige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung k�nnen die Vertragsdaten �ber die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzvertr�gen und die Allgemeinen Gesch�ftsbedingungen nochmals per E-Mail an Sie �bersandt.

Wesentliche Merkmale der Ware oder Dienstleistung

Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.

Preise und Zahlungsmodalit�ten

5.1. Die in den jeweiligen Angeboten angef�hrten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschlie�lich aller anfallenden Steuern.

5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind �ber eine entsprechend bezeichnete Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zus�tzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.

5.3. Die Ihnen zur Verf�gung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot ausgewiesen.

5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsanspr�che aus dem geschlossenen Vertrag sofort zur Zahlung f�llig.

Lieferbedingungen

6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschr�nkungen finden sich unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot.

Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfl�che keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).

6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zuf�lligen Untergangs und der zuf�lligen Verschlechterung der verkauften Sache w�hrend der Versendung erst mit der �bergabe der Ware an Sie �bergeht, unabh�ngig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenst�ndig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausf�hrung der Versendung bestimmte Person beauftragt haben.

Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.

Gesetzliches M�ngelhaftungsrecht

Die M�ngelhaftung richtet sich nach der Regelung "Gew�hrleistung" in unseren Allgemeinen Gesch�ftsbedingungen (Teil I).

letzte Aktualisierung: 23.10.2019

Shipping rates from Germany to U.S.A.

Shipping rates from Germany to U.S.A.
Order quantity	26 to 60 business days	26 to 60 business days
First item	� 41.87	� 41.87

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Detailed Seller Information