This book presents the select proceedings of the 11th National Conference on Advances in Metrology (AdMet 2022). The book highlights and discusses the recent technological developments in the areas of fundamental and quantum metrology, physico-mechanical and electrical metrology, time and frequency metrology, materials metrology, industrial and legal metrology, digital transformation in metrology, among others. This book is aimed for those engaged in conformity assessment, quality system management, calibration, and testing in all sectors of industry. The book is a valuable reference for metrologists, scientists, engineers, academicians, and students from research institutes and industrial establishments to explore the future directions and research in the areas of sensors, advance materials, measurements, and quality improvement.

About the Author

Sanjay Yadav, born in 1962, obtained his master degree in science (M.Sc.) in 1985 and Ph.D. degree in Physics in 1990. He is Former Chief Scientist and Head, Physico Mechanical Metrology Division of NPL and also Former Professor, Faculty of Physical Sciences, Academy of Scientific and Innovative Research (AcSIR), HRDG, Ghaziabad. Presently, he is working as the Editor-in-Chief (EIC) of the MAPAN: The Journal of Metrology Society of India. He is also Vice President of Metrology Society of India (MS), New Delhi as well as Vice President of Ultrasonic Society of India (USI), New Delhi. He had taught ‘Advanced Measurement Techniques & Metrology’ course, taken practical classes and supervising graduate, master and Ph.D. students since 2011 to 2022. He is the recipient of research scholarships from Ministry of Home Affairs, India (1986); CSIR, India (1988); Col. G.N. Bajpayee Award of Institution of Engineers, India (1989); Commendation Certificates from Haryana Government (1991 & 1992); JICA Fellowship of JAPAN (1998), Commendation Certificates from SASO, Saudi Arabia (2003); 3 Appreciation Certificates from Director, NPL (2005); Managing Editor, MAPAN (2006-2014); nominated as Member of APMP Technical Committee of Mass Related Quantities (TCM), Australia (2013-2019); Nominated as Country Representative in APMP, China (2019); Member, National Advisory Committee, NCERT, Delhi (2019); Members, Testing and Calibration Advisory Committee, BIS (2019, 2020 and 2021), Certified NABL Assessor as per ISO/IEC 17025:2017, very recently received a prestigious International award i.e. APMP Award for Developing Economies, China (2020), Governing Council Member of Fluid Controls Research Institute (FCRI), Palghat (2022), and Member of several Committees of International Measurement Confederation (IMEKO) including Governing Council since 2018. He has significantly contributed in the field of pressure metrology, biomedical instrumentation, ultrasonic transducers and instrumentation systems. His current research interests include research and developmental activities in physico mechanical measurements; establishment, realization, maintenance and up-gradation of national pressure and vacuum standards; dissemination of national practical pressure scale to users through apex level calibration, training and consultancy services; inter-laboratory comparisons, proficiency testing programme and key comparisons, implementation of Quality System in the laboratory as per ISO/IEC 17025 standard and Finite Element Analysis (FEA) and Monte Carlo Simulations for pressure balances. He has published more than 450 research papers in the national and international journals of repute and conferences, edited 20 books, 14 patents and copyrights, supervised 8 PhDs (another 5 in waiting), drafted several projects, scientific and technical reports, documents and policy papers.

Naveen Garg is Senior Principal Scientist and Head, Acoustics and Vibration Standards in CSIR-National Physical Laboratory, New Delhi, working in the field of sound and vibration since the past 19 years. He is Mechanical Engineer specializing in machine design, vibrations and acoustics, measurement science and working in development and upgradation of primary standards of sound pressure and vibration amplitude and R&D in Applied Acoustics. He has done his Doctorate in mechanical engineering from Delhi Technological University, Delhi, and M.Tech. in Machine Design from Indian Institute of Technology (IIT) Delhi. He has been Managing Editor of MAPAN-Journal of Metrology Society of India published by Springer and reviewer of many international journals and has enormously contributed towards evaluation, analysis and control of noise pollution.

Shankar G. Aggarwal is working at CSIR-NPL as Senior Principal Scientist (Professor (AcSIR)) from 2009, and his current research focus is ‘‘metrology for national ambient air quality standar^ 100 talks including talks in ~15 different countries. He was the fellow of Japan Society for the Promotion of Science, JSPS (2005-2007), Recipient of CITAC award -2013, NABL assessor of ISO/IEC 17025:2017 & ISO 17034:2016, Associate Editor of Mapan-JMSI and Asian Journal of Atmospheric Environment, member of BIPM GAWG Task Group on Particulate Matter Comparison, member of APMP Focus Group on Climate Change and Clean Air (FG-CCCA), etc.

Shiv Kumar Jaiswal obtained his B.E. (Electrical Engg.), M.Tech. (Electrical Engg.) and Ph.D. (Fluid Flow) degrees in 1994, 1996 and 2016 respectively. He is currently working as a Senior Principal Scientist and Head―Fluid Flow Metrology Section of CSIR―National Physical Laboratory (NPLI), New Delhi. He has more than 25 years of research, industrial and academic experience. He has been active Researcher in the field of electrical and fluid flow metrology. He has worked as Guest Researcher for one year in Quantum Electrical Metrology Division of National Institute of Standards and Technology (NIST), Gaithersburg, USA, during year 2006-07. He is Member of several committees of Bureau of Indian Standards (BIS), National Accreditation Board for Testing and Calibration Laboratories (NABL), Legal Metrology Department, Central Ground Water Authority, APMP Technical Committee for Fluid Flow (TCFF), International Measurement Confederation (IMEKO), etc. He has authored more than 59 publications in peer-reviewed journals, conferences, and book chapters. He is Managing Editor of MAPAN―Journal of Metrology Society of India and Vice President, Metrology Society of India.

Harish Kumar is currently working as Associate Professor & Dean Academic at the National Institute of Technology (NIT), Delhi. With more than 20 years of research and academic experience, he is an active researcher in the area of mechanical measurement and metrology. He served as Scientist at the National Physical Laboratory, India, for more than a decade, and as Guest Researcher at the National Institute of Standards and Technology, USA, in 2016. He has authored more than 150 publications in peer-reviewed journals and conference proceedings. He is an active reviewer for many prominent journals on measurement, metrology, and related areas and is Associate Editor of the MAPAN/Journal of Metrology Society of India, published by Springer.

Venu Gopal Achanta is a Noted Physicist, Nanophotonics expert, Metrologist and Science Leader, who joined CSIR-NPL as its Director in June 2021. He also held responsibility of another esteemed CSIR laboratory, i.e., CSIR-IGIB, New Delhi during April-December 2022. He did his M.Sc. in Physics from Central University Hyderabad. He obtained Ph.D. in Physics from TIFR in 2000 for his work on Exciton dynamics in low-dimensional semiconductors. In 2006, he was awarded Ph.D. in Electronics Engineering from Tokyo University for work ondesign and demonstration of an ultrafast all-optical switch. He joined TIFR as faculty in 2004 where he is a Professor (H) since 2018. His research interests include classical and quantum information processing with dipolar emitters like quantum dots embedded in photonic and nanophotonic structures, single photon metrology, dissemination of apex metrological traceability through world-class measurement standards, BNDs, skill development in the country, and strengthening the national quality infrastructure for the overall economic growth of the country.

"About this title" may belong to another edition of this title.

Store Description

Visit Seller's Storefront

Seller's business information

Edward Bowditch Ltd
Exstowe, Exton, Exeter, EX3 0PP, United Kingdom

Sale & Shipping Terms

Terms of Sale

Legal entity name: Edward Bowditch Ltd
Legal entity form: Limited company
Business correspondence address: Exstowe, Exton, Exeter, EX3 0PP
Company registration number: 04916632
VAT registration: GB834241546
Authorised representative: Mr. E. Bowditch

Right of cancellation

If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

INFORMATION REGARDING THE RIGHT OF CANCELLATION

Statutory Right to cancel

You have the right to cancel this contract within 14 days without giving any reason.

The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.

To exercise the right to cancel, you must inform us, Revaluation Books, Exstowe, Exton, EX3 0PP, Exeter, United Kingdom, 44 1179083586, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.

To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.

Effects of cancellation

If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to us or Revaluation Books, Edward Bowditch Ltd, Clifton Heights, Triangle West, BS8 1EJ, Bristol, United Kingdom, 44 1179083586, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of cancellation

The right of cancellation does not apply to:

the delivery of newspapers, journals or magazines with the exception of subscription contracts; and
the supply of digital content (including ebooks) which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not cancel it once delivery had started.

Model withdrawal form

(complete and return this form only if you wish to withdraw from the contract)

To: (Revaluation Books, Exstowe, Exton, EX3 0PP, Exeter, United Kingdom, 44 1179083586)

I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),

Ordered on (*)/received on (*)

Name of consumer(s)

Address of consumer(s)

Signature of consumer(s) (only if this form is notified on paper)

Date

* Delete as appropriate.

Shipping Terms

Orders usually dispatched within two working days.

Shipping rates from United Kingdom to U.S.A.

Shipping rates from United Kingdom to U.S.A.
Order quantity	7 to 14 business days	2 to 3 business days
First item	� 10.00	� 15.00

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.