Pump Selection, Operation, and Maintenance Handbook for Engineers (Paperback)
Language: English
Published by Independently Published, 2026
- Softcover
- New
Seller: Grand Eagle Retail, Bensenville, IL, U.S.A.Grand Eagle Retail
AbeBooks seller since October 12, 2005
Condition: New
£ 80.94
Quantity: 1 available
Add to basketItem description from seller
Paperback. Most pump failures are not really mysteries. Behind almost every case of cavitation, seal leakage, bearing failure, or an underperforming system is a hydraulic or mechanical principle that was overlooked at the selection stage, ignored during commissioning, or missed during a routine inspection. If you specify, install, operate, or maintain pumps, you already know how expensive that gap between theory and practice can be, and how often pump knowledge is scattered across vendor manuals, standards documents, and hard-earned personal experience rather than organized in one place.This handbook closes that gap with a comprehensive, single-volume reference that follows the complete life cycle of a pumping asset: fluid properties, hydraulic fundamentals, pump curves and the affinity laws, centrifugal and positive-displacement design, a structured selection methodology, materials and corrosion, sealing technology, NPSH and cavitation, system curve analysis, installation and alignment, commissioning, operation, energy efficiency, preventive and predictive maintenance, vibration analysis, bearing and lubrication management, overhaul procedures, and root-cause failure diagnosis. Because every part is connected back to the same underlying hydraulic and mechanical principles, the book works equally well read cover to cover or consulted chapter by chapter.Inside, you will: Build and interpret system curves, pump curves, and the affinity laws with confidence, using worked examples with realistic industrial numbers in both US customary and SI units.Apply a structured, repeatable methodology for selecting between centrifugal and positive-displacement technology and for evaluating vendor curves and quotations on a genuinely comparable basis.Understand NPSH margin, cavitation mechanisms, and suction system design well enough to prevent the single most common cause of premature pump damage.Choose sealing technology, materials of construction, and bearing and lubrication practices that match the fluid and service conditions instead of defaulting to habit.Work through installation, alignment, and commissioning procedures that catch problems before a pump is ever started.Apply a symptom-to-cause troubleshooting reference and root-cause investigation framework to diagnose vibration, flow shortfalls, seal leakage, and overheating systematically rather than by guesswork.Build a reliability-centered maintenance and lifecycle cost program that shifts a pumping fleet from reactive repair to planned, cost-justified care.This handbook is written for mechanical and rotating-equipment engineers, plant reliability and maintenance engineers, operations and maintenance technicians, and engineering students preparing to work with industrial pumping systems. Structured checklists, comparison tables, decision worksheets, a glossary, unit-conversion tables, and a troubleshooting quick-reference matrix support both a first read-through and years of use as a working reference afterward.Every principle in this book is tied to a specific, practical consequence, so the connection between hydraulic theory and pump reliability stops being abstract. Begin building a structured, defensible approach to pump selection, operation, and maintenance, and start closing the gap between what you specify and what actually keeps running. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…
Seller Inventory # 9798192473634
- Title
- Pump Selection, Operation, and Maintenance Handbook for Engineers (Paperback)
- Author
- Gavin Sterling
- Publisher
- Independently Published
- Publication year
- 2026
- Condition
- new
- Binding
- Paperback
- Language
- English
- ISBN 13
- 9798192473634
Most pump failures are not really mysteries. Behind almost every case of cavitation, seal leakage, bearing failure, or an underperforming system is a hydraulic or mechanical principle that was overlooked at the selection stage, ignored during commissioning, or missed during a routine inspection. If you specify, install, operate, or maintain pumps, you already know how expensive that gap between theory and practice can be, and how often pump knowledge is scattered across vendor manuals, standards documents, and hard-earned personal experience rather than organized in one place.
This handbook closes that gap with a comprehensive, single-volume reference that follows the complete life cycle of a pumping asset: fluid properties, hydraulic fundamentals, pump curves and the affinity laws, centrifugal and positive-displacement design, a structured selection methodology, materials and corrosion, sealing technology, NPSH and cavitation, system curve analysis, installation and alignment, commissioning, operation, energy efficiency, preventive and predictive maintenance, vibration analysis, bearing and lubrication management, overhaul procedures, and root-cause failure diagnosis. Because every part is connected back to the same underlying hydraulic and mechanical principles, the book works equally well read cover to cover or consulted chapter by chapter.
Inside, you will:
- Build and interpret system curves, pump curves, and the affinity laws with confidence, using worked examples with realistic industrial numbers in both US customary and SI units.
- Apply a structured, repeatable methodology for selecting between centrifugal and positive-displacement technology and for evaluating vendor curves and quotations on a genuinely comparable basis.
- Understand NPSH margin, cavitation mechanisms, and suction system design well enough to prevent the single most common cause of premature pump damage.
- Choose sealing technology, materials of construction, and bearing and lubrication practices that match the fluid and service conditions instead of defaulting to habit.
- Work through installation, alignment, and commissioning procedures that catch problems before a pump is ever started.
- Apply a symptom-to-cause troubleshooting reference and root-cause investigation framework to diagnose vibration, flow shortfalls, seal leakage, and overheating systematically rather than by guesswork.
- Build a reliability-centered maintenance and lifecycle cost program that shifts a pumping fleet from reactive repair to planned, cost-justified care.
This handbook is written for mechanical and rotating-equipment engineers, plant reliability and maintenance engineers, operations and maintenance technicians, and engineering students preparing to work with industrial pumping systems. Structured checklists, comparison tables, decision worksheets, a glossary, unit-conversion tables, and a troubleshooting quick-reference matrix support both a first read-through and years of use as a working reference afterward.
Every principle in this book is tied to a specific, practical consequence, so the connection between hydraulic theory and pump reliability stops being abstract. Begin building a structured, defensible approach to pump selection, operation, and maintenance, and start closing the gap between what you specify and what actually keeps running.
"Synopsis" may belong to another edition of this title.
Grand Eagle Retail
Bensenville, IL, U.S.A.
AbeBooks seller since October 12, 2005
Shipping rates within U.S.A.
| Item | 6 to 14 business days | 6 to 16 business days |
|---|---|---|
| First item | £ 0.00 | £ 0.00 |
Payment methods
Seller's business information
APOLLO ONLINE CORP.
605 Geddes Street
Wilmington, DE U.S.A. 19805
Terms of sale
We guarantee the condition of every book as it¿s described on the Abebooks web sites. If you¿ve changed
your mind about a book that you¿ve ordered, please use the Ask bookseller a question link to contact us
and we¿ll respond within 2 business days.
Books ship from California and Michigan.
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to Grand Eagle Retail, Bensenville, Illinois, U.S.A., without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.
Shipping terms
Orders usually ship within 2 business days. All books within the US ship free of charge. Delivery is 4-14 business days anywhere in the United States.
Books ship from California and Michigan.
If your book order is heavy or oversized, we may contact you to let you know extra shipping is required.