Pulse Electric Current Synthesis and Processing of Materials
ZA Munir
New - Soft cover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketThis book provides a state-of-the-art collection of papers presented at the 6th Pacific Rim Conference on Ceramic and Glass Technology presented in Maui, Hawaii in September of 2005.This book provides a state-of-the-art collection of papers presented at.
Seller Inventory # 556554046
Zuhair A. Munir is a Distinguished Professor of Materials Science at the University of California, Davis. He received his B.S., M.S., and PhD from the University of California, Berkeley. He has served as Associate Dean and as Dean of the College of Engineering. Professor Munir has been the recipient of numerous awards and honors, including the John Jeppson Award from the American Ceramic Society, The Faculty Research Award and Medal form UC Davis, the Medal of Honor form the International Organization of SHS, the Creativity in Research Award from the National Science Foundation, and the von Humboldt Award from Germany. He is listed as a Highly Cited Author in Materials Science by the Institute for Scientific Information. Professor Munir is a Fellow of the American Ceramic Society and the American Society for Metals. He is currently an Editor for the Journal of Materials Science and an Associate Editor for the Journal of the American Ceramic Society and has served as Editor-in-chief for the Journal of Materials Synthesis and Processing and as a Principal Editor for the Journal of Materials Research. Professor Munir is the author of more than 400 papers and 12 patents.
Manshi Ohyanagi is Presidential Aide and Director of Innovative Materials Processing Research Center, and professor of materials chemistry at Ryukoku University, Japan. He also serves as Dean of Ryukoku Extension Center. He received his B.Eng.(1983), M.Eng.(1985) and D.Eng.(1988) in science and engineering at Waseda University, Tokyo, Japan. During 1988 to 1989, he was with division of Chemistry at California Institute Technology. His research interests now include the synthesis and processing of ceramics. Recent his research has been focused on mechanical alloying, spark plasma sintering, combustion synthesis and hydrogen storage materials. He is the author or coauthor of approximately 100 published papers and 10 patents and book chapters.
M. Tokita is Senior Managing Director and General Manager of R & D Center of SPS Syntex INC., which is one of the affiliated companies of Sumitomo Coal Mining Company Ltd. Tokyo, Japan. He worked at Sumitomo as General Manager of Sintering Systems Department, New Materials & Processing Division long years. He is a graduate of the Tokyo Metropolitan College of Technology. He has been researching and developing in the field of electrical discharge applied to technologies and advanced materials processing since 1968, and had initially presented the Spark Plasma Sintering (SPS) Method in 1989. In 1995-1996 he was appointed as a visiting lecturer of Tohoku University, also in 1996-2000 as chief of the U.S.-Japan Joint Research Program on Functionally Graded Materials (FGM) by SPS. He received an award from the Japan Society of Powder and Powder Metallurgy for his research on the development of advanced SPS technology for Industrial applications. He has published many technical papers related to the SPS technologies on both advanced materials and SPS machine systems and processes. He is Executive Director of the SPS Forum-Japan since 1996.
K. A. Khor is Professor at School of Mechanical & Aerospace Engineering, and Director, Office of Research, Nanyang Technological University, Singapore. He obtained both BSc (Hons) and PhD degrees from Monash University, Australia. Since 2005, he serves at the Singapore-MIT-Alliance (SMA) Office as Deputy Director. He is also President, Institute of Materials, East Asia, and is the originator of the annual Materials Processing for Properties and Performance (MP3) conference series held in Asia. His research interests include spark plasma sintering (SPS); thermal spraying; solid oxide fuel cell (SOFC) technology; biomaterials; and advanced ceramics powder synthesis. To-date he has published over 220 papers in refereed international journals; made ~ 200 presentations at international conferences and is editor/co-editor of ~ 17 conferences proceedings and special issues of journals. He has been organizer/co-organizer of over 15 international conferences and symposia since 1995.
Dr. Toshio Hirai is Executive Director of Japan Fine Ceramics Center (JFCC) and Director of Materials Research and Development Laboratory of JFCC, and Emeritus Professor of Tohoku University, Japan.
He has carried on advanced ceramics research for more than 40 years. He is the pioneer in the research field of chemical vapor deposition of ceramic nano-composites and functionally graded materials. He had been the leader of many national projects and has made major contributions to the field of materials sciences. He published more than 400 articles and holds 134 patents. So that, he has received many awards from Japanese government and academic societies and also from USA and China. He was former President of the Ceramic Society of Japan and Vice-President of the Japan Society of Powder and Powder Metallurgy, and is Vice-President of the Functionally Graded Materials Forum.
Umberto Anselmi-Tamburini is professor of Physical Chemistry at the University of Pavia in Italy. He has been active for several years in investigations of several aspects of solid state reactivity. His main interests have been the endothermic decomposition reactions, the study of the reaction mechanism involved in the synthesis of high-temperature superconducting oxides, the combustion synthesis of advanced materials. Recently is main interest is focused on the influence high density electric current on the diffusivity in solids, and on the synthesis and densification of bulk functional nanostructured materials using the SPS. He has been member of the editorial board and regional editor of the Journal of Materials Synthesis and Processing.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
In order to exercise your revocation right, you must inform us (Moluna GmbH, Münsterstr. 105, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.
The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
To Moluna GmbH, Engberdingdamm 27, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date
(*) Cross out the incorrect option.
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | £ 42.51 | £ 42.51 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.