Protective Relay Testing and Commissioning (Paperback)
Language: English
Published by Independently Published, 2026
- Softcover
- New
Seller: CitiRetail, Stevenage, United KingdomCitiRetail
AbeBooks seller since June 29, 2022
Condition: New
£ 73.99
Quantity: 1 available
Add to basketItem description from seller
Paperback. A protective relay does nothing visible for almost all of its service life. It measures, compares, and waits - and then, in the brief and violent moment a fault arrives, everything depends on whether the protection was proven correctly before it went into service. The gap between a relay that is configured correctly and a protection scheme that actually works is wide, and it is where commissioning failures hide. A setting that is right on paper means little if a current transformer is wired with reversed polarity, if a trip contact lands on the wrong breaker, if a communications channel behaves unexpectedly, or if a single logic equation is wrong. Rote, menu-driven procedures collapse the moment the equipment, scheme, or symptom differs from the example.This comprehensive, practical guide closes that gap. It treats testing and commissioning as a disciplined process of establishing evidence that a protection scheme behaves exactly as its approved design requires. Every protection function is developed from its operating principle - through the quantities and logic you must verify - to suitable test methods and the interpretation of results, so you can reason about an unfamiliar relay instead of memorising one model's buttons. What you will be able to do: Verify the full measurement-to-trip chain, from instrument transformers through relay logic to breaker operation.Test overcurrent (50/51), differential (87), and distance (21) protection, including inverse-time curves, restraint characteristics, harmonic/inrush security, and boundary searches.Prove synchronism-check, dead-bus/dead-line logic, and communications-assisted scheme behaviour end to end.Carry out safe secondary and primary injection with correct isolation, test blocks, and trip-path control.Plan and time distributed, multi-terminal end-to-end tests, then move a scheme through pre-energization readiness, staged energization, and clean handover.Investigate misoperations with event timelines, oscillography, and a competing-hypotheses method, and build a maintenance programme that keeps protection dependable.The treatment is deliberately manufacturer-neutral, so the methods stay valid across relay generations and vendors while you take specific settings and tolerances from your own controlling documents. Worked examples, practice problems, answer keys, and standards references appear throughout. Written for relay test technicians, protection and control engineers, and substation commissioning engineers - and suitable for advanced students entering the field - this is the first-principles reference for anyone who must prove a scheme before it is trusted. Take the next step toward testing and commissioning protection with clarity and confidence: open the book and start building tests that are rigorous, repeatable, and understood. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…
Seller Inventory # 9798173517258
- Title
- Protective Relay Testing and Commissioning (Paperback)
- Author
- Graham R. Whitmore
- Publisher
- Independently Published
- Publication year
- 2026
- Condition
- new
- Binding
- Paperback
- Language
- English
- ISBN 13
- 9798173517258
The gap between a relay that is configured correctly and a protection scheme that actually works is wide, and it is where commissioning failures hide. A setting that is right on paper means little if a current transformer is wired with reversed polarity, if a trip contact lands on the wrong breaker, if a communications channel behaves unexpectedly, or if a single logic equation is wrong. Rote, menu-driven procedures collapse the moment the equipment, scheme, or symptom differs from the example.
This comprehensive, practical guide closes that gap. It treats testing and commissioning as a disciplined process of establishing evidence that a protection scheme behaves exactly as its approved design requires. Every protection function is developed from its operating principle — through the quantities and logic you must verify — to suitable test methods and the interpretation of results, so you can reason about an unfamiliar relay instead of memorising one model’s buttons.
What you will be able to do:
- Verify the full measurement-to-trip chain, from instrument transformers through relay logic to breaker operation.
- Test overcurrent (50/51), differential (87), and distance (21) protection, including inverse-time curves, restraint characteristics, harmonic/inrush security, and boundary searches.
- Prove synchronism-check, dead-bus/dead-line logic, and communications-assisted scheme behaviour end to end.
- Carry out safe secondary and primary injection with correct isolation, test blocks, and trip-path control.
- Plan and time distributed, multi-terminal end-to-end tests, then move a scheme through pre-energization readiness, staged energization, and clean handover.
- Investigate misoperations with event timelines, oscillography, and a competing-hypotheses method, and build a maintenance programme that keeps protection dependable.
The treatment is deliberately manufacturer-neutral, so the methods stay valid across relay generations and vendors while you take specific settings and tolerances from your own controlling documents. Worked examples, practice problems, answer keys, and standards references appear throughout.
Written for relay test technicians, protection and control engineers, and substation commissioning engineers — and suitable for advanced students entering the field — this is the first-principles reference for anyone who must prove a scheme before it is trusted. Take the next step toward testing and commissioning protection with clarity and confidence: open the book and start building tests that are rigorous, repeatable, and understood.
"Synopsis" may belong to another edition of this title.
CitiRetail
Stevenage, United Kingdom
AbeBooks seller since June 29, 2022
Shipping rates from United Kingdom to U.S.A.
| Item | 7 to 14 business days | 7 to 60 business days |
|---|---|---|
| First item | £ 37.00 | £ 37.00 |
Payment methods
Store description
Online business
Seller's business information
ABC BOOKS LIMITED
10 John Street
London, United Kingdom WC1N 2EB
Terms of sale
Orders can be returned within 30 days of receipt.
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to CitiRetail, Stevenage, United Kingdom, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.
Shipping terms
Please note that titles are dispatched from our US, Canadian or Australian warehouses. Delivery times specified in shipping terms. Orders ship within 2 business days. Delivery to your door then takes 7-14 days.