Principles of Thermal Analysis and Calorimetry
Language: English
Published by RSC Publishing Apr 2002, 2002
- Softcover
- New

Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
AbeBooks seller since August 14, 2006
Condition: New
£ 56.23
Quantity: 1 available
Add to basketItem description from seller
Neuware - The use of thermal and calorimetric methods has shown rapid growth over the last two decades, in an increasingly wide range of applications. In addition, a number of powerful new techniques have been developed. This book supplies a concise and readable account of the principles, experimental apparatus and practical procedures used in thermal analysis and calorimetric methods of analysis. Brief accounts of the basic theory are reinforced with detailed applications of the methods and contemporary developments. Also included is information on standard test methods and manufacturers. Written by acknowledged experts, Principles of Thermal Analysis and Calorimetry is up-to-date, wide-ranging and practical. It will be an important source of information for many levels of readership in a variety of areas, from students and lecturers through to industrial and laboratory staff and consultants.
Seller Inventory # 9780854046102
- Title
- Principles of Thermal Analysis and Calorimetry
- Author
- Peter Haines
- Publisher
- RSC Publishing Apr 2002
- Publication year
- 2002
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 0854046100
- ISBN 13
- 9780854046102
- Item weight
- 426 grams
- Dimensions
- 246x174x13 mm
"Synopsis" may belong to another edition of this title.
Excerpt. © Reprinted by permission. All rights reserved.
Principles of Thermal Analysis and Calorimetry
By P. J. HainesThe Royal Society of Chemistry
All rights reserved.
Contents
Chapter 1 Introduction P. J. Haines, 1,
Chapter 2 Thermogravimetry and Derivative Thermogravimetry G. R. Heal, 10,
Chapter 3 Differential Thermal Analysis and Differential Scanning Calorimetry P. G. Laye, 55,
Chapter 4 Thermomechanical, Dynamic Mechanical and Dielectric Methods D.M. Price, 94,
Chapter 5 Calorimetry R. J.Willson, 129,
Chapter 6 Simultaneous Thermal Analysis Techniques S. B.Warrington, 166,
Appendices, 190,
Subject Index, 216,
CHAPTER 1
Introduction
P. J. Haines
Oakland Analytical Services, Farnham, UK
MATERIALS, HEAT AND CHANGES
Whenever a sample of material is to be studied, one of the easiest tests to perform is to heat it. The observation of the behaviour of the sample and the quantitative measurement of the changes on heating can yield a great deal of useful information on the nature of the material.
In the simplest case, the temperature of the sample may increase, without any change of form or chemical reaction taking place. In short, it gets hotter. For many other materials, the behaviour is more complex. When ice is heated, it melts at 0°C and then boils at 100°C. When sugar is heated, it melts, and then forms brown caramel. Heating coal produces inflammable gases, tars and coke. The list is endless, since every material behaves in a characteristic way when heated.
Thermal methods of analysis have developed out of the scientific study of the changes in the properties of a sample which occur on heating. Calorimetric methods measure heat changes.
Some sample properties may be obvious to the analyst, such as colour, shape and dimensions or may be measured easily, such as mass, density and mechanical strength. There are also properties which depend on the bonding, molecular structure and nature of the material. These include the thermodynamic properties such as heat capacity, enthalpy and entropy and also the structural and molecular properties which determine the X-ray diffraction and spectrometric behaviour.
Transformations which change the materials in a system will alter one or more of these properties. The change may be physical such as melting, crystalline transition or vaporisation or it may be chemical involving a reaction which alters the chemical structure of the material. Even biological processes such as metabolism, interaction or decomposition may be included.
Sometimes a change brought about by heating may be reversed by cooling a sample afterwards. A pure organic substance melts sharply, for example benzoic acid melts at 122°C and it recrystallises sharply when cooled below this temperature. Ammonium chloride dissociates into ammonia and hydrogen chloride gases when heated, but these recombine on cooling. At high temperature, calcium carbonate splits up to yield calcium oxide and carbon dioxide gas, and these too will recombine on cooling if the carbon dioxide is not removed. The system reaches an equilibrium state at a particular temperature.
[FORMULA NOT REPRODUCIBLE IN ASCII]
To raise the temperature of any system heat energy must be supplied and when sufficient energy is available the system will change into a more stable state. The mechanical properties of a material change as it is heated. Often it expands and becomes more pliable well below the melting point. These are fundamental, important changes on a molecular level, and their study enables the analyst to draw valuable conclusions about the sample, its previous history, its preparation, chemical nature and the likely behaviour during its proposed use.
The temperature at which a particular event occurs, or the temperature range over which a reaction happens, are often characteristic of the nature and history of a sample, and sometimes of the methods used to study it. Sharp transitions, such as the melting of pure materials, may be used to calibrate equipment and as the "fixed points" of thermometry and of the International Practical Temperature Scale (IPTS).
For example, how does the simple, pure inorganic compound potassium nitrate, KNO3, behave when heated? At room temperature, say 20°C, this is a white, crystalline solid. To raise its temperature to 30°C at constant presssure, we must supply an amount of heat depending on the specific heat capacity, Cp approximately 1 J K-1 g-1 at this temperature, the mass m of the sample and the change in temperature. So, for 1 g heated 10°C, we must supply 10 J. To complicate matters, the heat capacity changes with temperature as well. When the temperature reaches 128 °C, the crystals change their structure, and this needs more energy, about 53 J g-1. Then the new crystals are heated, when Cp ≈ 1.2 J K-1 g-1, until the melting point of 338 °C, when more heat must be supplied to melt the sample. Raising the temperature above the melting point eventually causes the sample to decompose to form potassium nitrite, KNO2, so that the mass of the sample is decreased by around 16% and oxygen gas is given off.
This example illustrates the importance of thermal techniques and measurements. Calorimetry measures the amounts of heat, while appropriate thermal methods give the temperatures of phase changes, the temperatures of decomposition and the products of the reaction. Other methods will show the expansion, mass and colour changes on heating.
The analysis of thermal events may be approached in two ways, which overlap considerably. Either the experiment may be designed to measure thermal properties (heat capacity, enthalpy, entropy and free energy) with high precision and accuracy at particular temperatures and conditions, or we may study properties, including thermal properties, over a wider range of temperatures using a controlled heating procedure.
Which experiment is chosen depends on the sample to be analysed. There would be little point in obtaining highly accurate heat capacities on a polymeric or cement sample of complex composition, but its behaviour on heating would be informative. Theoretical work on organic structure and kinetics might require precise knowledge of equilibrium thermal properties which could not easily be obtained using variable temperature methods. Therefore, the techniques are complementary.
Since the worldwide adoption of the SI system of units it is perhaps useful to stress the symbols and units to be used for the physical quantities involved in these methods. The major quantities are given in Appendix 1A and the others may be found in the references.
DEFINITIONS OF THERMAL AND CALORIMETRIC METHODS
Formal definitions are not essential, but those accepted by the scientific community may be found in the literature.
Calorimetry is the measurement of the heat changes which occur during a process. The calorimetric experiment is conducted under particular, controlled conditions, for example, either at constant volume in a bomb calorimeter or at constant temperature in an isothermal calorimeter.
Calorimetry encompasses a very large variety of techniques, including titration, flow, reaction and sorption, and is used to study reactions of all sorts of materials from pyrotechnics to Pharmaceuticals.
Calorimetric methods may be classified either by the principle of measurement (e.g. heat compensating or heat accumulating), or by the method of operation (static, flow or scanning) or by the construction principle (single or twin cell). These will be discussed further in Chapter 5. Thermal analysis is a group of techniques in which one (or more) property of a sample is studied while the sample is subjected to a controlled temperature programme. The programme may take many forms:
(a) The sample may be subjected to a constant heating (or cooling) rate (dT/dt = β), for example 10 K min-1.
(b) The sample may be held isothermally (β = 0).
(c) A "modulated temperature programme" may be used where a sinusoidal or other alteration is superimposed onto the underlying heating rate.
(d) To simulate special industrial or other processes, a stepwise or complex programme may be used. For example, the sample might be equilibrated at 25°C for 10 min, heated at 10 K min-1 up to 200°C, held there for 30 min and then cooled at 5 K min-1 to 50°C.
(e) The heating may be controlled by the response of the sample itself.
THE FAMILY OF THERMAL METHODS
Every thermal method studies and measures a property as a function of temperature. The properties studied may include almost every physical or chemical property of the sample, or its products. The more frequently used thermal analysis techniques are shown in Table 1 together with the names most usually employed for them.
INSTRUMENTATION FOR THERMAL ANALYSIS AND CALORIMETRY
The modern instrumentation used for any experiment in thermal analysis or calorimetry is usually made up of four major parts:
• The sample and a container or holder;
• sensors to detect and measure a particular property of the sample and to measure temperature;
• an enclosure within which the experimental parameters (e.g. temperature, pressure, gas atmosphere) may be controlled;
• a computer to control the experimental parameters, such as the temperature programme, to collect the data from the sensors and to process the data to produce meaningful results and records.
This is shown schematically in Figure 1, and specific applications and instrumentation will be considered in the following chapters.
THE REASONS FOR USING THERMAL AND CALORIMETRIC METHODS
Novice analysts may enquire why yet another technique is needed when gas chromatography, molecular and atomic spectrometry and electrochemical analysis plus many other powerful analytical tools are available. The answer might best be given by considering two practical examples.
First, how can you analyse a mixture of processed minerals such as a cement? Although X-ray diffraction might tell you the different minerals present and atomic absorption spectrometry could measure the elements quantitatively, this does not help to analyse how the cement would behave in practice. For this we need to compare the behaviour under conditions of mechanical and thermal stress and the thermoanalytical techniques of TG, DTA and TMA are important tools for doing this.
Second, the preparation of new chemicals for new pharmaceutical products, synthetic materials and foods could add to the hazards which workers and customers face. Thermal instability and explosive behaviour can be extremely destructive and costly events. Reaction calorimetry and similar techniques can help to predict the likely behaviour of chemicals when reactions, transport and storage are concerned. Physiological behaviour may vary with the nature and form of a drug, and the nature and interconversion of these forms is often studied by thermal and calorimetric methods.
Many analytical techniques require samples in a particular form. For example, gas–liquid chromatography and mass spectrometry need volatile samples and UV–VIS spectrometry usually uses solutions. Therefore, in analysing we destroy the structure of the matrix containing the sample. This has two disadvantages: (i) the behaviour of the sample in its original matrix may be different and (ii) it is time-consuming to alter the form. It is possible to use thermal methods to study the sample "as received". This avoids laborious preparation, does not change the thermal and molecular history of the sample and gives information to the analyst about the real sample and how it would behave in the situation or process where it is actually used.
THE NEED FOR PROPER PRACTICE
Some analytical techniques are sample specific. The "group frequency" bands in an infrared spectrum are largely independent of the method used to obtain the spectrum, whether it is run as a solid KBr disc, a Nujol mull or a solution and whether it is obtained by a dispersive or a Fourier transform instrument. Similarly the titration of an acid with a base should give the same result whether the end-point is detected by an indicator or electrochemically.
This is not always so in the case of thermal methods. The results obtained depend upon the conditions used to prepare the sample, the instrumental parameters selected for the run and the chemical reactions involved. That is not to say that results are not reproducible provided similar conditions are selected. For example, it is possible to compare samples of a polymer to see if their behaviour is "good" or "bad" according to their potential use, but the experimental parameters used for running each sample must be the same.
The useful acronym "SCRAM" (sample–crucible-rate of heating–atmosphere–mass) will enable the analyst to obtain good, reproducible results for most thermal methods provided that the following details are recorded for each run:
The sample: A proper chemical description must be given together with the source and pre-treatments. The history of the sample, impurities and dilution with inert material can all affect results.
The crucible: The material and shape of the crucible or sample holder is important. Deep crucibles may restrict gas flow more than flat, wide ones, and platinum crucibles catalyse some reactions more than alumina ones. The type of holder or clamping used for thermomechanical methods is equally important. The make and type of instrument used should also be recorded.
The rate of heating: This has most important effects. A very slow heating rate will allow the reactions to come closer to equilibrium and there will be less thermal lag in the apparatus. Conversely, high heating rates will give a faster experiment, deviate more from equilibrium and cause greater thermal lag. The parameters of special heating programmes, such as modulated temperature or sample control, must be noted.
The atmosphere: Both the transfer of heat, the supply and removal of gaseous reactants and the nature of the reactions which occur, or are prevented, depend on the chemical nature of the atmosphere and its flow. Oxidations will occur well in oxygen, less so in air and not at all in argon. Product removal by a fairly rapid gas flow may prevent reverse reactions occurring.
The mass of the sample: A large mass of sample will require more energy, and heat transfer will be determined by sample mass and dimensions. These include the volume, packing, and particle size of the sample. Fine powders react rapidly, lumps more slowly. Large samples may allow the detection of small effects. Comparison of runs should preferably be made using similar sample masses, sizes and shapes.
Specific techniques require the recording of other parameters, for example the load on the sample in thermomechanical analysis. Calorimetric methods, too, require attention to the exact details of each experiment. In the following chapters the principles and practice of thermal analysis and of calorimetry will be described and illustrated with some of the many examples of its use in industry, academic research and testing.
CHAPTER 2Thermogravimetry and Derivative Thermogravimetry
G. R. Heal
Formerly of Department of Chemistry and Applied Chemistry, University of Salford, UK
INTRODUCTION AND DEFINITIONS
Thermogravimetry (TG) is an experimental technique used in a complete evaluation and interpretation of results when it is known as Thermog-ravimetric Analysis (TGA). The technique has been defined by ICTAC (the International Confederation for Thermal Analysis and Calorimetry) as a technique in which the mass change of a substance is measured as a function of temperature whilst the substance is subjected to a controlled temperature programme. The temperature programme must be taken to include holding the sample at a constant temperature other than ambient, when the mass change is measured against time. Mass loss is only seen if a process occurs where a volatile component is lost. There are, of course, reactions that may take place with no mass loss. These may be detected by the allied techniques of Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC) which are described in Chapter 3. Results are presented as a plot of mass, m, against temperature, T or time, t. The mass loss then appears as a step. This is shown in Figure 1(A).
The temperature range shown in this plot has been restricted to 400 to 600 °C to show the detail of the step. In a normal experiment the temperature might be run from room temperature to 1000°C or higher. It should be noted that the shape is sigmoid in nature, that is, although most mass loss occurs around one temperature, where the line is steepest, some reaction starts well before the main reaction temperature. Similarly there is still some residual mass loss well after the main reaction.
An alternative presentation of results is to take the derivative of the original experimental curve to give dm/dt, or rate of mass loss against time, and to plot that against temperature, T or time, t. Alternatively the derivative may be against temperature T giving dm/dT. The production of such curves is called Derivative Thermogravimetry (DTG). Such a curve is shown in Figure 1(B); the spread of the reaction over a wide temperature range appears here as a relatively broad peak. The DTG curve is of assistance if there are overlapping reactions. Double peaks or a shoulder on a main peak appear in these cases. Slow reactions, with other fast reactions superimposed, then appear as gradient changes in the DTG curve. The area under the DTG peak is proportional to the mass loss, so relative mass losses may be compared. Measurements of just relative peak heights may suffice for some purposes. The position of the peak may not be indicative of any characteristic point in the mechanism of the reaction, only where mass loss is fastest. However, it may be used, if all that is required is to use the peak as a "finger print" of the presence of a substance in a mixture, e.g. a particular mineral in a rock or soil sample.
INSTRUMENTATION
Balance
In the essential form of the apparatus, the substance is placed in a small inert crucible, which is attached to a microbalance and has a furnace positioned around the sample. The furnace may be positioned in several places relative to the balance. This is shown in Figure 2.
(Continues...)
Excerpted from Principles of Thermal Analysis and Calorimetry by P. J. Haines. Copyright © 2002 The Royal Society of Chemistry. Excerpted by permission of The Royal Society of Chemistry.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 7 to 10 business days | 5 to 7 business days |
|---|---|---|
| First item | £ 29.34 | £ 37.72 |
Payment methods
- Bank Wire Transfer
- Check
- Paypal
Store description
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Specialty
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumSeller's business information
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Germany 37574
Imprint
Seller Info:
AHA-BUCH GmbH
represented by the managing director Christel Glass
Garlebsen 48
37574 Einbeck
Deutschland
Telefon: 055639996039
Telefax: 055639995974
E-Mail: abebooks@aha-buch.de
USt-IdNr.: DE261904229
registered at Commercial register Amtsgerichtes Göttingen
Handelsregisternummer HRB 200691
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
We have been a member of the "FairCommerce" initiative since 25.05.2018.
For more information, see www.fair-commerce.de.
Terms of sale
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity. An entrepreneur is any natural or legal person or a partnership with legal capacity who, when concluding a legal transaction, acts in the exercise of his independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The object of the contract is the sale of goods.
(2) If an article is listed by us at AbeBooks or ZVAB, the activation of the offer page at AbeBooks or ZVAB constitutes the binding offer to conclude a contract under the conditions contained in the article page.
(3) The contract is concluded via the online shopping cart system as follows:
The goods intended for purchase are stored in the "shopping cart". Via the corresponding button in the navigation bar you can call up the "shopping cart" and make changes there at any time.
After calling up the "Checkout" page and entering the personal data as well as the payment and shipping conditions, all order data will be displayed again on the order overview page.
Before sending the order, you have the option of checking all information again, changing it (also via the "back" function of the Internet browser) or cancelling the purchase.
By submitting the order via the "Buy now" button, you declare the acceptance of the offer in a legally binding manner, whereby the contract is concluded.
(4) The processing of the order and transmission of all information required in connection with the conclusion of the contract is partly automated by e-mail. You must therefore ensure that the e-mail address you have stored with us is correct, that the receipt of the e-mails is technically ensured and, in particular, that spam filters do not prevent it.
§ 3 Right of retention, retention of title
(1) You can only exercise a right of retention if it concerns claims from the same contractual relationship.
(2) The goods remain our property until full payment of the purchase price.
§ 4 Warranty
(1) The statutory warranty rights exist.
(2) In the case of used goods, the warranty period is one year from delivery of the item, deviating from the statutory regulation. The shortening of the deadline does not apply:
- culpably caused damages attributable to us from injury to life, limb or health and in the case of other damages caused intentionally or through gross negligence;
- insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item.
(3) As a consumer, you are requested to check the item immediately upon delivery for completeness, obvious defects and transport damage and to inform us and the freight forwarder of any complaints as soon as possible. If you do not comply with this, this will have no effect on your statutory warranty claims.
§ 5 Choice of law, place of performance, place of jurisdiction
(1) German law shall apply. In the case of consumers, this choice of law shall only apply insofar as this does not withdraw the protection afforded by mandatory provisions of the law of the state of the consumer's habitual residence (principle of favourability).
(2) The place of performance for all services arising from the existing business relationships with us as well as the place of jurisdiction is our registered office, insofar as you are not a consumer, but a merchant, a legal entity under public law or a special fund under public law. The same applies if you do not have a general place of jurisdiction in Germany or the EU or if the domicile or habitual residence is not known at the time the action is brought. The right to appeal to the court at another statutory place of jurisdiction remains unaffected by this.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods shall expressly not apply.
II. Customer Information
- Identity of the Seller
AHA-BUCH GmbH
Garlebsen 48
D-37574 Einbeck
Germany
Telephone: 055639996039
E-mail: abebooks@aha-buch.de.
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
- Information on the conclusion of the contract
The technical steps for the conclusion of the contract, the conclusion of the contract itself and the correction options are carried out in accordance with the provisions "Conclusion of the contract" of our General Terms and Conditions (Part I.).
- Contract language, contract text storage
3.1. The contract language is german.
3.2. The complete text of the contract will not be stored by us. Before sending the order, the contract data can be printed out or electronically saved via the print function of the browser. After receipt of the order by us, the order data, the legally prescribed information for distance contracts and the General Terms and Conditions will be sent to you again by e-mail.
- Essential characteristics of the goods or services
The essential characteristics of the goods and/or services can be found in the respective offer.
- Prices and terms of payment
5.1. The prices stated in the respective offers as well as the shipping costs represent total prices. They include all price components including all applicable taxes.
5.2. The shipping costs incurred are not included in the purchase price. They can be called up via a correspondingly designated button on our website or in the respective offer, are shown separately in the course of the ordering process and are to be borne by you in addition, unless free shipping has been promised.
5.3. If the delivery is made to countries outside the European Union, we may incur additional costs for which we are not responsible, such as.B customs duties, taxes or money transfer fees (transfer or exchange rate fees of the credit institutions), which are to be borne by you. Any costs incurred for the transfer of money shall also be borne by you in cases where the delivery is made to an EU member state, but the payment was initiated outside the European Union.
5.4. The payment methods available to you are indicated under a corresponding button on our website or in the respective offer.
5.5. Unless otherwise stated for the individual payment methods, the payment claims from the concluded contract are due for payment immediately.
- Terms of delivery
6.1. The terms of delivery, the delivery date and, if applicable, existing delivery restrictions can be found under a correspondingly designated button on our website or in the respective offer.
Insofar as no other deadline is specified in the respective offer or under the correspondingly designated button, the delivery of the goods will take place within 3-5 days after conclusion of the contract (in the case of agreed advance payment, however, only after the time of your payment instruction).
6.2. Insofar as you are a consumer, it is regulated by law that the risk of accidental loss and accidental deterioration of the sold item during dispatch shall only pass to you upon handover of the goods, regardless of whether the shipment is insured or uninsured. This does not apply if you have independently commissioned a transport company not named by the entrepreneur or a person otherwise designated to carry out the shipment.
- Statutory liability for defects
Liability for defects is governed by the "Warranty" provision in our General Terms and Conditions (Part I).
last update: 01/06/2022
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and disclosure of personal data when placing orders
When ordering, we collect and process your personal data only to the extent necessary to fulfil and process your order and to process your enquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 para. 1 lit.b GDPR and is necessary for the performance of a contract with you.
Your data will be passed on, for example, to the shipping companies and dropshipping providers selected by you, payment service providers, service providers for order processing and IT service providers.
In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability.
In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
Right to object
If the personal data processing listed here is based on our legitimate interest pursuant to Art. 6 para. 1 lit. f GDPR, you have the right to object to this processing at any time with effect for the future for reasons arising from your particular situation.
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to AHA-BUCH GmbH, Einbeck, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.
Shipping terms
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.
Privacy and security
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and use of personal data for orders
When ordering, we collect and use your personal data only to the extent necessary to fulfill and process your order and to process your inquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 (1) lit.b GDPR and is necessary for the performance of a contract with you. Your data will not be passed on to third parties without your express consent. Excluded from this are only our service partners, which we need to process the contractual relationship or service providers whom we use in the context of order processing. In addition to the recipients named in the respective clauses of this data protection declaration, these are, for example, recipients of the following categories: shipping service providers, payment service providers, merchandise management service providers, service providers for order processing, web hosts, IT service providers and dropshipping merchants. In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability. In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
last updated: 01/06/2022