Nanoelectronics : Materials to Chips Design
Balwinder Raj
Sold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: 1 available
Add to basketSold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
Condition: New
Quantity: 1 available
Add to basketnach der Bestellung gedruckt Neuware - Printed after ordering - This book exhibits a unique way to explain nano materials, devices, analysis of its design parameters to meet the sub-nano-regime challenges for low power chip design. It highlights conventional and novel nano materials, devices and circuits, leakage current mitigation techniques and other important tradeoffs along with exhaustive analysis.
Seller Inventory # 9781032745985
This book exhibits a unique way of explaining nanomaterials and devices and analyzing their design parameters to meet the sub-nanoregime challenges for low-power chip design. Since process variability, device sizing, and power supply scaling are ongoing challenges in very large-scale integration (VLSI) circuit designs, this book highlights the conventional and novel nanomaterials, devices and circuits, leakage current mitigation techniques, and other important trade-offs along with exhaustive analysis. More focus has been placed throughout the book on various trade-offs for high-speed and low-power VLSI devices and circuits co-design.
This book:
It is primarily written for senior undergraduates, graduate students, and academic researchers in the fields of electrical engineering, electronics and communications engineering, materials science, nanoscience, and nanotechnology.
Balwinder Raj (MIEEE’2006) is currently working as Associate Professor at the National Institute of Technology Jalandhar, India. He has more than 15 years of teaching and research experience. He did BTech in Electronics Engineering (PTU Jalandhar), MTech in Microelectronics (PU Chandigarh), and PhD in VLSI Design (IIT Roorkee), India, in 2004, 2006, and 2010, respectively. For further research work, the European Commission awarded him the “Erasmus Mundus” Mobility of Life research fellowship for postdoc research work at the University of Rome, Tor Vergata, Italy, in 2010–2011. Dr Raj received India4EU (India for European Commission) Fellowship and worked as visiting researcher at KTH University, Stockholm, Sweden, October–November 2013. He also visited Aalto University in Finland as visiting researcher during June 2017.
He had received Best Teacher Award from the Indian Society for Technical Education (ISTE), New Delhi, in 26 July 2013. Dr Raj received the Young Scientist Award from the Punjab Academy of Sciences during 18th Punjab Science Congress held on 9 February 2015. He has also received research paper award in the International Conference on Electrical and Electronics Engineering held at Pattaya, Thailand, from 11 to 12 July 2015. Dr Raj has authored/co-authored 8 books, 15 book chapters, and more than 150 research papers in peer-reviewed international/national journals and conferences. His areas of interest in research are classical/non-classical nanoscale semiconductor device modeling; nanoelectronics and their applications in hardware security; sensors and circuit design; FinFET-based memory design; low-power VLSI design; digital/analog VLSI design; and FPGA implementation.
Suman Lata Tripathi is working as Professor in Lovely Professional University with more than 21 years of experience in academics and research. She has completed her PhD in the area of microelectronics and VLSI design from MNNIT, Allahabad, India. She did her MTech in Electronics Engineering from UP Technical University, Lucknow, and BTech in Electrical Engineering from Purvanchal University, Jaunpur, India. She is also a remote post-doc researcher at Nottingham Trent University, London, UK, in the year 2022. She has published more than 102 research papers in refereed Springer, Elsevier, IEEE, and IOP science journals; conference proceeding; and e-books. She has also published 13 Indian patents and 4 copyrights. She has guided four PhD scholars and four are under submission stage. She has organized several workshops, summer internships, and expert lectures for students. She has worked as a session chair, conference steering committee member, editorial board member, and peer reviewer in international/national IEEE, Springer, Wiley, etc., journal and conferences. She has received the “Research Excellence Award” in 2019 and “Research Appreciation Award” in 2020 and 2021 at Lovely Professional University, India. She is recipient of IGEN Women’s for Green Technology “Women’s Achievers Award” on International Women’s Day, 8 March 2023. She had received the best paper at IEEE ICICS-2018. She has also received funded project from SERB DST under the scheme TARE in the area of microelectronic devices. She has edited and authored more than 19 books in different areas of Electronics and Electrical Engineering. She is associated for editing work with top publishers like Elsevier, CRC Taylor and Francis, Wiley-IEEE, SP Wiley, Nova Science, and Apple Academic Press. She is also working as book series editor for title, “Smart Engineering Systems” CRC Press, “Engineering System Design for Sustainable Developments”, and “Decentralized Systems & Next Generation Internet” Wiley-Scrivener, and conference series editor for “Conference Proceedings Series on Intelligent Systems for Engineering Designs” CRC Press Taylor & Francis. She is serving as academic editor of Journal of Electrical and Computer Engineering (Scopus/WoS, Q2), International Journal of Reconfigurable Computing (Scopus, Q3), and Active and Passive Electronic Component (Scopus, Q4), Hindawi. She is associated as senior member IEEE, Fellow IETE, and Life member ISC and is continuously involved in different professional activities along with academic work. Her area of expertise includes microelectronics device modeling and characterization, low-power VLSI circuit design, VLSI design of testing, and advanced FET design for IoT, embedded system design, reconfigurable architecture with FPGAs, and biomedical applications.
Tarun Chaudhary did her BTech in Electronics and Communication Engineering from UIET, Panjab University, Chandigarh, in 2010; MTech. in VDAT (ECE) from NIT Hamirpur, Himachal Pradesh, in 2012; and PhD from NIT Hamirpur, Himanchal Pradesh, India, in the year 2017. During her PhD she has worked on the designing and mathematical modeling of vertical FET. She is currently working as Assistant Professor in ECE Department, Dr B R Ambedkar National Institute of Technology Jalandhar, India. She has worked as a faculty member under SMDP C2SD Project from October 2017 till November 2019. She is guiding PhD and PG scholars in the areas of nanoscale devices and circuits, and FPGAbased design. She has 5 book chapters and more than 25 research papers in peer-reviewed international/national journals and conferences. She has organized several STCs and workshops in the domain of VLSI design. Of the three students who are pursuing their PhD under her supervision, all are working on TFETs, NCFETs, and nanowire-based sensors. Her present research is largely focused on the design and modeling of nanoscale devices, TFETs, junctionless devices, and low-power VLSI design circuits.
Mandeep Singh has done his BTech in Electronics and Communication Engineering, MTech ECE (VLSI DESIGN) from Punjabi University, Patiala, and PhD from NIT Jalandhar, Punjab, India. He has eight-year teaching experience to teach undergraduate and master students in Punjab Technical University, India; the National Institute of Technology Uttarakhand, India; and Chaudhary Charan Singh University, Meerut, UP, India. Currently he is working as Postdoc Researcher in the Indian Institute of Technology Kanpur, UP, India. He has published various research papers in the domain of VLSI design and circuit. His areas of research are semiconductor device modeling, memory designs, CNT and nanowires, and low-power VLSI designs.
"About this title" may belong to another edition of this title.
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes...
**Right of withdrawal for consumers **
(A consumer is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity.)
Cancellation
Withdrawal
You have the right to revoke this contract within fourteen days without giving reasons.
The revocation period is fourteen days from the day,
on which you or a third party named by you, who is not the carrier, has taken possession of the goods, provided that you have ordered one or more goods within the framework of a uniform order and these are or will be delivered uniformly;
on which you or a third party named by you, who is not the carrier, has taken possession of the last goods, provided that you have ordered several goods within the framework of a single order and these are delivered separately;
on which you or a third party named by you, who is not the carrier, has taken possession of the last partial shipment or the last piece, provided that you have ordered goods that are delivered in several partial shipments or pieces;
In order to exercise your right of withdrawal, you must inform us (AHA-BUCH GmbH, Garlebsen 48, 37574 Einbeck, telephone number: 05563 9996039, fax number: 05563 9995974, e-mail address: service@aha-buch.de) of your decision to revoke this contract by means of a clear declaration (e.B. a letter sent by post, fax or e-mail). You can use the attached model withdrawal form, but this is not mandatory.
To comply with the revocation period, it is sufficient that you send the notification of the exercise of the right of revocation before the expiry of the revocation period.
Consequences of revocation
If you withdraw from this contract, we shall reimburse you all payments that we have received from you, including delivery costs (with the exception of the additional costs resulting from the fact that you have chosen a different type of delivery than the cheapest standard delivery offered by us), immediately and at the latest within fourteen days from the day on which we received the notification of your revocation of this contract.
For this repayment, we will use the same means of payment that you used for the original transaction, unless expressly agreed otherwise with you; in no case will you be charged any fees for this repayment.
We may withhold reimbursement until we have received the goods back or until you have provided proof that you have returned the goods, whichever is the earlier.
You must return or hand over the goods to us immediately and in any case at the latest within fourteen days from the day on which you inform us of the revocation of this contract. The deadline is met if you send the goods before the expiry of the period of fourteen days.
You bear the direct costs of returning the goods.
You only have to pay for any loss of value of the goods if this loss of value is due to handling of the goods that is not necessary to check the nature, characteristics and functioning of the goods.
Reasons for exclusion or extinction
The right of revocation does not apply to contracts
The right of revocation expires prematurely in the case of contracts
Sample withdrawal form
(If you want to cancel the contract, please fill out this form and send it back.)
To AHA-BUCH GmbH, Garlebsen 48, 37574 Einbeck, fax number: 05563 9995974, e-mail address: service@aha-buch.de :
I/we () hereby revoke the contract concluded by me/us () for the purchase of the following goods ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of notification on paper)
Date
(*) Delete as appropriate.
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.
| Order quantity | 30 to 40 business days | 7 to 14 business days |
|---|---|---|
| First item | £ 54.99 | £ 63.63 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.